Yes, I tried it but it looks I got issue before because the login/password is not filled in the protocol. I was wondering if something is not well implemented in the telnet dialogue. Do you have any clue on this before ?
>> 2010-02-15 13:43:50 [32013] [8] INFO: AT2[portech]: opening device >> 2010-02-15 13:43:50 [32013] [8] DEBUG: Connecting to <192.168.1.121> >> 2010-02-15 13:43:50 [32013] [8] DEBUG: AT2[portech]: device opened. >> Telnet mode = 1 >> 2010-02-15 13:43:50 [32013] [8] DEBUG: AT2[portech]: --> ^M >> 2010-02-15 13:43:52 [32013] [8] DEBUG: AT2[portech]: --> AT^M >> 2010-02-15 13:43:57 [32013] [8] DEBUG: AT2[portech]: <-- username: AT >> 2010-02-15 13:44:03 [32013] [8] DEBUG: AT2[portech]: --> AT^M >> 2010-02-15 13:44:08 [32013] [8] DEBUG: AT2[portech]: <-- password: ** >> 2010-02-15 13:44:08 [32013] [8] DEBUG: AT2[portech]: <-- bad username The 'username:' string is not recognize, I took a look on hte source code in smsc_at.c but there is nothing that could explain that. -----Original Message----- From: Alvaro Cornejo [mailto:cornejo.alv...@gmail.com] Sent: mardi 16 février 2010 20:57 To: info.ubichip Cc: users@kannel.org Subject: Re: Telnet device Did you tried "^M" carret char plus M char ?? This is a sort of character representation of a carriage return... Regards Alvaro On Tue, Feb 16, 2010 at 5:01 PM, info.ubichip <info.ubic...@free.fr> wrote: > In this modem, you could have both in the same telnet session, you > just have to tell to the modem to go in the AT mode, which is done by > entering the command 'module' and then we are in full AT command. > > So I got two issues : > - first to tell kannel to connect to it with the correct > login/password which looks to be not the cas > - second, I have to tell the modem to go in the AT mode, which > I assume I could do it by passing the command in the init-string of > the modem (as soon as the init-string accept the carriage return). > > If you have any tricks to help me for the first point ? > > Thanks in advance > > -----Original Message----- > From: Alvaro Cornejo [mailto:cornejo.alv...@gmail.com] > Sent: mardi 16 février 2010 11:02 > To: info.ubichip > Cc: users@kannel.org > Subject: Re: Telnet device > > I don´t know your modem, but in the cases I know, port 23 is for > managing the modem configs and such. > > For using AT interface they usually use a different port. with the > same Telnet protocol... something like Telnet host:2100 > > Regards > > |--------------------------------------------------------------------- > |------ > --------------------------------------| > Envíe y Reciba Datos y mensajes de Texto (SMS) hacia y desde cualquier > celular y Nextel en el Perú, México y en mas de 180 paises. Use > aplicaciones > 2 vias via SMS y GPRS online > Visitenos en www.perusms.NET www.smsglobal.com.mx y > www.pravcom.com > > > > On Tue, Feb 16, 2010 at 1:06 PM, info.ubichip <info.ubic...@free.fr> wrote: >> Hello, >> >> Does someone got similar issue ? >> >> Regards >> >> >> -----Original Message----- >> From: users-boun...@kannel.org [mailto:users-boun...@kannel.org] On >> Behalf Of info.ubichip >> Sent: lundi 15 février 2010 13:49 >> To: users@kannel.org >> Subject: Using Portech modem >> >> Hello All, >> >> I would like to use a portech GSM gateway MV-370 on a kannel 1.4.3 >> version, I'm able to send basic sms by hand using telnet as the >> following > example : >> >> Telnet 192.168.1.121 >> >> username:voip >> password:**** >> User level = admin >> >> Command : logout,module,module1,module2 >>>module >> Getting module 1.. >> Got!! Press 'ctrl-x' to release module 1. >> >> at+cmgf=1 >> OK >> At+cmgs="1122334455" >>>test >> +CMGS:30 >> >> >> So I make a configuration in kannel as follow : >> group = smsc >> smsc = at >> smsc-id = portech >> allowed-smsc-id = portech >> log-level = 0 >> log-file = "/var/log/kannel/portech.log" >> device = telnet >> host = 192.168.1.121 >> port = 23 >> login-prompt = "username:" >> password-prompt = "password:" >> smsc-username = "voip" >> smsc-password = "1234" >> modemtype = portech >> validityperiod = 172 >> keepalive = 10 >> my-number = 0012345678 >> sim-buffering = true >> >> >> I got the following error, it is like the telnet session is not >> initialized correctly : >> >> 2010-02-15 13:43:50 [32013] [8] INFO: AT2[portech]: trying to use >> speed <115200> from modem definition >> 2010-02-15 13:43:50 [32013] [8] INFO: AT2[portech]: opening device >> 2010-02-15 13:43:50 [32013] [8] DEBUG: Connecting to <192.168.1.121> >> 2010-02-15 13:43:50 [32013] [8] DEBUG: AT2[portech]: device opened. >> Telnet mode = 1 >> 2010-02-15 13:43:50 [32013] [8] DEBUG: AT2[portech]: --> ^M >> 2010-02-15 13:43:52 [32013] [8] DEBUG: AT2[portech]: --> AT^M >> 2010-02-15 13:43:57 [32013] [8] DEBUG: AT2[portech]: <-- username: AT >> 2010-02-15 13:44:03 [32013] [8] DEBUG: AT2[portech]: --> AT^M >> 2010-02-15 13:44:08 [32013] [8] DEBUG: AT2[portech]: <-- password: ** >> 2010-02-15 13:44:08 [32013] [8] DEBUG: AT2[portech]: <-- bad username >> or password!!! >> 2010-02-15 13:44:08 [32013] [8] DEBUG: AT2[portech]: <-- exit... >> 2010-02-15 13:44:12 [32013] [8] DEBUG: AT2[portech]: --> AT^M >> 2010-02-15 13:44:21 [32013] [8] INFO: AT2[portech]: Closing device >> 2010-02-15 13:44:21 [32013] [8] INFO: AT2[portech]: speed in modem >> definition don't work, will autodetect >> >> >> Does someone got similar issue with this type of modem ? >> >> My second question is : as you could see after the telnet connection, >> I have to specify the command 'module' to get full access to the AT >> command of the modem, does there is a way to put it in the >> init-string in the modem definition ? If yes how to send a carriage >> return in the init-string parameter (I have already some AT+CNMI....' >> command to > process. >> >> >> Thanks in advance for your help >> >> >> >> >> >> >> > > -- |--------------------------------------------------------------------------- --------------------------------------| Envíe y Reciba Datos y mensajes de Texto (SMS) hacia y desde cualquier celular y Nextel en el Perú, México y en mas de 180 paises. Use aplicaciones 2 vias via SMS y GPRS online Visitenos en www.perusms.NET www.smsglobal.com.mx y www.pravcom.com
