Hi, Are you sending those messages using one call to the send cgi with multi destinations in the "to" parameter?
Regards. -- Benaiad On Tue, May 11, 2010 at 10:57 PM, Emmanuel CHANSON < emmanuelchan...@gmail.com> wrote: > If the issue is not well described tell me...I really want to understand > this behavior... > > > Regards, > > Emmanuel > > 2010/5/11 Emmanuel CHANSON <emmanuelchan...@gmail.com> > >> I am also getting the following error below during the sending of my SMS >> mailling and I don't know if it is linked with this. >> >> Test: >> 40 SMS were sent, I received the ACK (but no Success/STATUS-REPORT maybe >> stored in the mobile) and after that I receive the error: +CMS ERROR: An >> unknown error occurred (500) >> Alvaro told me it can be an operator restriction (I received a network >> error so I change the mobile but same behavior with a different error) >> >> If I stop Kannel then move the kannel.store file somewhere, restart Kannel >> and try to send a new single SMS it works !! >> >> So to resume I have 2 issue maybe linked: >> - DLR not received into bearerbox, seems blocked in modem. >> - SMS mailling that is blocked after let's say 40 SMS sent (I had 80 SMS >> to send) >> >> don"t if the issue if linked to: >> - the fact I send concatened SMS >> - the AT+CNMI command that is not correct and DLR are stored in the mobile >> and block the MT with the ERROR 500 ? >> - others things.. >> >> I dont know how to investiguate... >> >> I have previously post my modem.conf >> >> This issue is linked to the post I already send about +CMS ERROR: Network >> out of order (38), but changing the mobile does not change anything and I >> don't think it is an operator restriction because if I move the kannel;store >> file and send a SMS it works... >> >> Regards, >> >> Emmanuel >> >> >> 2010/5/11 Emmanuel CHANSON <emmanuelchan...@gmail.com> >> >> Hello, >>> >>> I would like to ask the community about this behavior. >>> I am using a Nokia 6230 as modem. >>> >>> When I send a single SMS I got the ACK and the STATUS-REPORT, behavior is >>> Ok. >>> >>> 2010-05-11 13:51:44 [14368] [6] DEBUG: AT2[nokiaphone]: <-- +CDS: 24 >>> 2010-05-11 13:51:44 [14368] [6] DEBUG: AT2[nokiaphone]: <-- >>> 069186770720F0067C099186773705F2015011311513440150113115134400 >>> 2010-05-11 13:51:44 [14368] [6] DEBUG: AT2[nokiaphone]: received message >>> from SMSC: +687770020 >>> 2010-05-11 13:51:44 [14368] [6] DEBUG: AT2[nokiaphone]: got STATUS-REPORT >>> for message <124>: >>> >>> When I send let's say 20 SMS using cgi script, I got all the ACK but no >>> STATUS-REPORT >>> and I see this in smsc.log: >>> >>> >>> 2010-05-11 13:46:59 [14249] [6] DEBUG: AT2[nokiaphone]: --> AT+CPMS?^M >>> 2010-05-11 13:46:59 [14249] [6] DEBUG: AT2[nokiaphone]: <-- +CPMS: >>> "ME",0,150,"SM",18,60,"MT",18,210 >>> 2010-05-11 13:46:59 [14249] [6] DEBUG: AT2[nokiaphone]: <-- OK >>> >>> So isn't it my DLRs that are stored in the mobile ? Why aren't they >>> forwarded to bearerbox ? >>> >>> My modem config for the modem is the following: >>> >>> >>> group = modems >>> id = nokiaphone >>> name = "Nokia Phone" >>> detect-string = "Nokia Mobile Phone" >>> init-string = "AT+CNMI=1,2,0,1,0;+CMEE=1" >>> need-sleep = true >>> speed = 460800 >>> keepalive-cmd = "AT+CBC;+CSQ" >>> enable-mms = true >>> message-storage = "ME" >>> >>> Regards, >>> >>> Emmanuel >>> >> >> >> >> -- >> Emmanuel >> >> CHANSON Emmanuel >> Mobile Nouvelle-Calédonie: +687.77.35.02 >> Mobile France: +33 (0) 6.68.03.89.56 >> @email : emmanuelchan...@gmail.com >> > > > > -- > Emmanuel > > CHANSON Emmanuel > Mobile Nouvelle-Calédonie: +687.77.35.02 > Mobile France: +33 (0) 6.68.03.89.56 > @email : emmanuelchan...@gmail.com >
