Hi
Kannel works with GSM modems not CDMA, however you can patch kannel and do a
driver with specific CDMA commads. take a look at smsc_at.c it is the GSM
modem driver
Regards
Alvaro
|-----------------------------------------------------------------------------------------------------------------|
Envíe y Reciba Datos y mensajes de Texto (SMS) hacia y desde cualquier
celular y Nextel
en el Perú, México y en mas de 180 paises. Use aplicaciones 2 vias via SMS y
GPRS online
Visitenos en www.perusms.NET www.smsglobal.com.mx y
www.pravcom.com
2010/7/22 Nikos Balkanas <nbalka...@gmail.com>
> Hi,
>
> Best starting point would be to read the User's Guide from the site. It has
> a section dedicated to modem initialization. If after trying it out you
> still have specific questions, please address this list and post maximum
> detail relevant logs + configuration.
>
> In the meantime using a serial communication program like minicom, type the
> following commands to the modem:
>
> AT+CMGF=?
> AT+CMGF?
>
> And post output.
>
> BR,
> Nikos
> ----- Original Message ----- From: "Mailing Lists" <
> mailing.li...@cooperativecomputer.com>
> To: <users@kannel.org>
> Sent: Thursday, July 22, 2010 5:11 AM
> Subject: kannel 1.4.3 -> multitech mtcba-c-n2, serial -> sprint cdma
> ...modem error trying to open
>
>
>
>
>> Hi ... am new to Kannel and the board. Looking to setup a sms gateway
>> using a multitech mtcba-c-n2 over Sprint CDMA. am running on the latest
>> release of Debian, 32bit.
>>
>> am able to communicate to the modem and send text messages via putty
>> communicating through the serial port (ttyS0).
>>
>> when bearerbox starts, it sees the modem, sends the init string no problem
>> (set to auto - it picks it up as a wavecom) but spits out an error when
>> bearerbox pushes an AT+CMGF=0^M, then restarts the sequence. the multitech
>> AT command reference DOES NOT have this command listed and manually trying
>> it in putty spits out an error too - my modem does not accept this it seems!
>>
>> before this I was having a problem with the +CPIN command till I set the
>> no-pin = true in modems.conf. being CDMA, I do not have a pin.
>>
>> I'm wondering:
>> 1. if Kannel is compatible with AT CDMA modems and mine in particular?
>> 2. what file do I need to edit to customize the AT commands Kannel sends
>> to my modem? (if possible)
>>
>> thanks a bunch ~Rich
>>
>> --
>> Mailing Lists <mailing.li...@cooperativecomputer.com>
>>
>>
>
>
