Hi All, Anyone at all who used a Nokia N93 or N95 or N97 that can share their config with me?
If the phones work on minicom and vwdial, am I correct to assume they should work with kannel as well? but need the correct init string? thanks, Zak -----Original Message----- From: Gjergji Guri <gjergji.g...@facilization.com> To: Zak <xi...@netscape.net> Cc: nbalka...@gmail.com; users@kannel.org Sent: Sun, Aug 29, 2010 10:24 am Subject: Re: Nokia N73 Hi Zak, Have you checked the init string? you can use wvdialconf from the command prompt to find out the inits string of your modem. Are you able to send SMS using the AT commands. You can use minicom program. Cheers, Gjergji On Sun, Aug 29, 2010 at 10:32 AM, Zak <xi...@netscape.net> wrote: Here's more log from kannel: 2010-08-28 21:28:41 [4145] [0] INFO: Debug_lvl = 1, log_file = <none>, log_lvl = 0 2010-08-28 21:28:41 [4145] [0] WARNING: DLR: using default 'internal' for storage type. 2010-08-28 21:28:41 [4145] [0] INFO: DLR using storage type: internal 2010-08-28 21:28:41 [4145] [0] INFO: Added logfile `/usr/local/kannel/logs/kannel.log' with level `0'. 2010-08-28 21:28:41 [4145] [0] INFO: Started access logfile `/usr/local/kannel/logs/core_access.log'. 2010-08-28 21:28:41 [4145] [0] INFO: HTTP: Opening server at port 13000. 2010-08-28 21:28:41 [4145] [0] INFO: BOXC: 'smsbox-max-pending' not set, using default (100). 2010-08-28 21:28:41 [4145] [0] INFO: Set SMS resend frequency to 60 seconds. 2010-08-28 21:28:41 [4145] [0] INFO: SMS resend retry set to unlimited. 2010-08-28 21:28:41 [4145] [0] INFO: DLR rerouting for smsc id <modem> disabled. 2010-08-28 21:28:41 [4145] [0] INFO: Added logfile `/usr/local/kannel/logs/modem.log' with level `1'. 2010-08-28 21:28:41 [4145] [0] INFO: AT2[modem]: configuration shows modemtype <Nokia> 2010-08-28 21:28:41 [4145] [0] INFO: AT2[modem]: read modem definition for <Nokia> 2010-08-28 21:28:41 [4145] [0] INFO: ---------------------------------------- 2010-08-28 21:28:41 [4145] [0] INFO: Kannel bearerbox II version 1.4.3 starting 2010-08-28 21:28:41 [4145] [0] INFO: MAIN: Start-up done, entering mainloop 2010-08-28 21:28:41 [4145] [6] INFO: Logging thread `6' to logfile `/usr/local/kannel/logs/modem.log' with level `1'. 2010-08-28 21:28:51 [4145] [0] WARNING: Killing signal or HTTP admin command received, shutting down... 2010-08-28 21:28:54 [4145] [0] INFO: All flow threads have died, killing core 2010-08-28 21:28:54 [4145] [0] INFO: Total WDP messages: received 0, sent 0 2010-08-28 21:28:54 [4145] [0] INFO: Total SMS messages: received 0, sent 0 -----Original Message----- From: Nikos Balkanas <nbalka...@gmail.com> To: users@kannel.org; Zak <xi...@netscape.net> Sent: Sun, Aug 29, 2010 1:24 am Subject: Re: Nokia N73 Please repost same logs at maximum detail. BR, Nikos ----- Original Message ----- From: Zak To: users@kannel.org Sent: Saturday, August 28, 2010 11:43 PM Subject: Nokia N73 Hi All, I have a Nokia N73 that I could use to send SMS with minicom and also managed to get the init string using wvdial. But not been able to use kannel to get it send or receive SMS. The log from kannel is below and it just keeps on openning and closing device. 2010-08-28 21:28:41 [4145] [6] INFO: AT2[modem]: opening device 2010-08-28 21:28:42 [4145] [6] INFO: AT2[modem]: Logging in 2010-08-28 21:28:42 [4145] [6] INFO: AT2[modem]: init device 2010-08-28 21:28:42 [4145] [6] INFO: AT2[modem]: speed set to 460800 2010-08-28 21:28:43 [4145] [6] INFO: AT2[modem]: AT SMSC successfully opened. 2010-08-28 21:28:45 [4145] [6] INFO: AT2[modem]: Closing device 2010-08-28 21:28:45 [4145] [6] ERROR: AT2[modem]: Couldn't connect (retrying in 10 seconds). My modem config is: group = modems id = Nokia name = "Nokia" detect-string = "Nokia Mobile Phones" detect-string2 = "N93" need-sleep = true init-string="ATZ" enable-mms = true and SMSC group = smsc smsc = at smsc-id = modem modemtype = Nokia device = /dev/ttyACM0 speed = 460800 sim-buffering = true keepalive = 180 idle-timeout = 160 denied-prefix = "633;213;286;200;633;8001;277" log-file = "/usr/local/kannel/logs/modem.log" log-level=1 My wvdialconf file generated: [Dialer Defaults] Modem = /dev/ttyACM0 Baud = 460800 Init1 = ATZ Init2 = ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0 ISDN = 0 Modem Type = USB Modem ; Phone = <Target Phone Number> ; Username = <Your Login Name> ; Password = <Your Password> Any help appreciated. Thanks, Zak
