I am not able to send sms after setting sendsms-port = 13018. What if I dont start smsbox at all and only run bearerbox and sqlbox.
2010/9/24 Nikos Balkanas <nbalka...@gmail.com>: > Sorry my mistake. In group smsbox change: > > sendsms-port = 13018 > > BR, > Nikos > ----- Original Message ----- From: "Harbhag Singh Sohal" > <harbhag.so...@gmail.com> > To: <users@kannel.org> > Sent: Thursday, September 23, 2010 10:13 PM > Subject: Re: sqlbox configuration problem > > >> In sqlbox config file I set bearerbox-port = 13016 and smsbox-port = >> 13017 and in kannel config file i defined new variable bearerbox-port >> = 13017 . So now When I start Bearerbox I see the following : >> >> 2010-09-24 00:35:08 [15786] [0] INFO: Debug_lvl = 1, log_file = >> <none>, log_lvl = 0 >> 2010-09-24 00:35:08 [15786] [0] INFO: MYSQL: Connected to server at >> localhost. >> 2010-09-24 00:35:08 [15786] [0] INFO: MYSQL: server version >> 5.1.41-3ubuntu12.6, client version 5.1.41. >> 2010-09-24 00:35:08 [15786] [0] INFO: DLR using storage type: mysql >> 2010-09-24 00:35:08 [15786] [0] INFO: Added logfile >> `/var/log/kannel/bearerbox.log' with level `1'. >> 2010-09-24 00:35:08 [15786] [0] INFO: Started access logfile >> `/var/log/kannel/access.log'. >> 2010-09-24 00:35:08 [15786] [0] INFO: HTTP: Opening server at port 13015. >> 2010-09-24 00:35:08 [15786] [0] INFO: BOXC: 'smsbox-max-pending' not >> set, using default (100). >> 2010-09-24 00:35:08 [15786] [0] INFO: Set SMS resend frequency to 60 >> seconds. >> 2010-09-24 00:35:08 [15786] [0] INFO: SMS resend retry set to unlimited. >> 2010-09-24 00:35:08 [15786] [0] INFO: DLR rerouting for smsc id >> <(null)> disabled. >> 2010-09-24 00:35:08 [15786] [0] INFO: AT2[/dev/ttyUSB0]: configuration >> doesn't show modemtype. will autodetect >> 2010-09-24 00:35:08 [15786] [0] INFO: >> ---------------------------------------- >> 2010-09-24 00:35:08 [15786] [0] INFO: Kannel bearerbox II version 1.4.3 >> starting >> 2010-09-24 00:35:08 [15786] [6] INFO: AT2[/dev/ttyUSB0]: opening device >> 2010-09-24 00:35:08 [15786] [0] INFO: MAIN: Start-up done, entering >> mainloop >> 2010-09-24 00:35:09 [15786] [6] INFO: AT2[/dev/ttyUSB0]: speed set to >> 115200 >> 2010-09-24 00:35:11 [15786] [6] INFO: AT2[/dev/ttyUSB0]: Closing device >> 2010-09-24 00:35:11 [15786] [6] INFO: AT2[/dev/ttyUSB0]: detect speed is >> 115200 >> 2010-09-24 00:35:11 [15786] [6] INFO: AT2[/dev/ttyUSB0]: opening device >> 2010-09-24 00:35:12 [15786] [6] INFO: AT2[/dev/ttyUSB0]: speed set to >> 115200 >> 2010-09-24 00:35:14 [15786] [6] INFO: AT2[/dev/ttyUSB0]: Closing device >> 2010-09-24 00:35:14 [15786] [6] INFO: AT2[/dev/ttyUSB0]: opening device >> 2010-09-24 00:35:14 [15786] [6] INFO: AT2[/dev/ttyUSB0]: Logging in >> 2010-09-24 00:35:15 [15786] [6] INFO: AT2[/dev/ttyUSB0]: init device >> 2010-09-24 00:35:15 [15786] [6] INFO: AT2[/dev/ttyUSB0]: speed set to >> 115200 >> 2010-09-24 00:35:16 [15786] [6] INFO: AT2[/dev/ttyUSB0]: AT SMSC >> successfully opened. >> 2010-09-24 00:35:44 [15786] [5] INFO: Client connected from <127.0.0.1> >> >> And when I start sqlbox I see the following >> >> 2010-09-24 00:36:21 [15895] [0] INFO: Debug_lvl = 1, log_file = >> <none>, log_lvl = 0 >> 2010-09-24 00:36:21 [15895] [0] INFO: Starting to log to file >> /var/log/kannel/kannel-sqlbox.log level 0 >> 2010-09-24 00:36:21 [15895] [0] INFO: Added logfile >> `/var/log/kannel/kannel-sqlbox.log' with level `0'. >> 2010-09-24 00:36:21 [15895] [0] INFO: MYSQL: Connected to server at >> localhost. >> 2010-09-24 00:36:21 [15895] [0] INFO: MYSQL: server version >> 5.1.41-3ubuntu12.6, client version 5.1.41. >> 2010-09-24 00:36:21 [15895] [1] INFO: Connected to bearerbox at >> localhost port 13016. >> >> And when I start the smsbox I see the following >> >> 2010-09-24 00:36:28 [15901] [0] INFO: Debug_lvl = 1, log_file = >> <none>, log_lvl = 0 >> 2010-09-24 00:36:28 [15901] [0] INFO: Starting to log to file >> /var/log/kannel/smsbox.log level 0 >> 2010-09-24 00:36:28 [15901] [0] INFO: Added logfile >> `/var/log/kannel/smsbox.log' with level `0'. >> 2010-09-24 00:36:28 [15901] [0] INFO: Service global sender set as >> '+91*************' >> 2010-09-24 00:36:28 [15901] [0] INFO: Logging accesses to >> '/var/log/kannel/smsbox-access.log'. >> 2010-09-24 00:36:28 [15901] [0] INFO: Started access logfile >> `/var/log/kannel/smsbox-access.log'. >> 2010-09-24 00:36:28 [15901] [0] INFO: HTTP: Opening server at port 13017. >> 2010-09-24 00:36:28 [15901] [0] ERROR: bind failed >> 2010-09-24 00:36:28 [15901] [0] ERROR: System error 98: Address already in >> use >> 2010-09-24 00:36:28 [15901] [0] PANIC: Failed to open HTTP socket >> 2010-09-24 00:36:28 [15901] [0] PANIC: smsbox(gw_panic+0xcd) [0x808a33d] >> 2010-09-24 00:36:28 [15901] [0] PANIC: smsbox(main+0x1344) [0x8055ae4] >> 2010-09-24 00:36:28 [15901] [0] PANIC: >> /lib/tls/i686/cmov/libc.so.6(__libc_start_main+0xe6) [0x541bd6] >> 2010-09-24 00:36:28 [15901] [0] PANIC: smsbox() [0x8053ff1] >> >> >> So basically I am not able to start the smsbox. >> >> 2010/9/23 Nikos Balkanas <nbalka...@gmail.com>: >>> >>> I told you how in my previous email. Read it through. >>> >>> BR, >>> Nikos >>> ----- Original Message ----- From: "Harbhag Singh Sohal" >>> <harbhag.so...@gmail.com> >>> To: <users@kannel.org> >>> Sent: Thursday, September 23, 2010 8:09 PM >>> Subject: Re: sqlbox configuration problem >>> >>> >>> Is it possible to connect to smsbox and bearerbox together at the same >>> time >>> ? >>> If not then how can I connect to either bearerbox or smsbox alone ? >>> >>> On Thu, Sep 23, 2010 at 10:36 PM, Harbhag Singh Sohal >>> <harbhag.so...@gmail.com> wrote: >>>> >>>> Well yes, that was the reason of segmentation fault. >>>> >>>> On Thu, Sep 23, 2010 at 10:35 PM, Harbhag Singh Sohal >>>> <harbhag.so...@gmail.com> wrote: >>>>> >>>>> Is this because I have commented the smsbox-port variable in my sqlbox >>>>> config file ? >>>>> >>>>> On Thu, Sep 23, 2010 at 10:12 PM, Harbhag Singh Sohal >>>>> <harbhag.so...@gmail.com> wrote: >>>>>> >>>>>> Now I am not even able to start sqlbox , below is error that I am >>>>>> getting >>>>>> 2010-09-23 22:09:46 [2090] [0] INFO: Debug_lvl = 1, log_file = <none>, >>>>>> log_lvl = 0 >>>>>> 2010-09-23 22:09:46 [2090] [0] INFO: Starting to log to file >>>>>> /var/log/kannel/kannel >>>>>> -sqlbox.log level 0 >>>>>> 2010-09-23 22:09:46 [2090] [0] INFO: Added logfile >>>>>> `/var/log/kannel/kannel-sqlbox.l >>>>>> og' with level `0'. >>>>>> Segmentation fault >>>>>> >>>>>> 2010/9/23 Nikos Balkanas <nbalka...@gmail.com>: >>>>>>> >>>>>>> You have problems in your sqlbox configuration. >>>>>>> >>>>>>> If you want to connect sqlbox to bearerbox, you should set: >>>>>>> >>>>>>> bearerbox-port = 13016 >>>>>>> smsbox-port = 13017 >>>>>>> >>>>>>> If you want to connect smsbox to bearerbox, you are OK. >>>>>>> If you want to connect smsbox to sqlbox, then you should set in group >>>>>>> smsbox: >>>>>>> >>>>>>> bearerbox-port = 13017 >>>>>>> >>>>>>> BR, >>>>>>> Nikos >>>>>>> ----- Original Message ----- From: "Harbhag Singh Sohal" >>>>>>> <harbhag.so...@gmail.com> >>>>>>> To: <users@kannel.org> >>>>>>> Sent: Thursday, September 23, 2010 6:13 PM >>>>>>> Subject: sqlbox configuration problem >>>>>>> >>>>>>> >>>>>>>> I dont understand what wrong I am doing. Seems like there is >>>>>>>> conflict >>>>>>>> between the ports. Bearerbox starts without problem , after starting >>>>>>>> bearerbox I try to start smsbox and it also start fine but after >>>>>>>> that >>>>>>>> sqlbox dont start. it says port already in use. But if I start >>>>>>>> sqlbox >>>>>>>> after bearerbox then it starts fine but then smsbox dont start and >>>>>>>> it >>>>>>>> says error port already in use. Below are my config files. >>>>>>>> >>>>>>>> group = core >>>>>>>> admin-port = 13015 >>>>>>>> admin-password = foo >>>>>>>> admin-deny-ip = "*.*.*.*" >>>>>>>> admin-allow-ip = "" >>>>>>>> dlr-storage = mysql >>>>>>>> smsbox-port = 13016 >>>>>>>> #wdp-interface-name = "*" >>>>>>>> log-file = "/var/log/kannel/bearerbox.log" >>>>>>>> access-log = "/var/log/kannel/access.log" >>>>>>>> box-deny-ip = "*.*.*.*" >>>>>>>> box-allow-ip = "127.0.0.1" >>>>>>>> log-level = 1 >>>>>>>> >>>>>>>> #group = wapbox >>>>>>>> #bearerbox-host = localhost >>>>>>>> #log-file = "/var/log/kannel/wapbox.log" >>>>>>>> >>>>>>>> group = smsc >>>>>>>> smsc = at >>>>>>>> modemtype = auto >>>>>>>> device= /dev/ttyUSB0 >>>>>>>> my-number = +91946***** >>>>>>>> connect-allow-ip = 127.0.0.1 >>>>>>>> log-level = 0 >>>>>>>> >>>>>>>> group = mysql-connection >>>>>>>> id = mydlr >>>>>>>> host = localhost >>>>>>>> username = foo >>>>>>>> password = bar >>>>>>>> database = foo >>>>>>>> >>>>>>>> group = dlr-db >>>>>>>> id = mydlr >>>>>>>> table = dlr >>>>>>>> field-smsc = smsc >>>>>>>> field-timestamp = ts >>>>>>>> field-source=source >>>>>>>> field-destination = destination >>>>>>>> field-service = service >>>>>>>> field-url = url >>>>>>>> field-mask = mask >>>>>>>> field-status = status >>>>>>>> field-boxc-id = boxc >>>>>>>> >>>>>>>> group = modems >>>>>>>> id = huawei >>>>>>>> name = "Huawei E220" >>>>>>>> detect-string = "huawei" >>>>>>>> init-string = "ATZ" >>>>>>>> init-string = "AT Q0 V1 E1 S0=0 &C1 &D2 +FCLASS=0" >>>>>>>> >>>>>>>> group = smsbox >>>>>>>> bearerbox-host = localhost >>>>>>>> sendsms-port = 13017 >>>>>>>> global-sender = +919******** >>>>>>>> access-log = "/var/log/kannel/smsbox-access.log" >>>>>>>> log-file = "/var/log/kannel/smsbox.log" >>>>>>>> log-level = 0 >>>>>>>> >>>>>>>> group = sendsms-user >>>>>>>> username = foo >>>>>>>> password = bar >>>>>>>> concatenation= true >>>>>>>> max-messages = 10 >>>>>>>> >>>>>>>> group = sms-service >>>>>>>> keyword-regex = .* >>>>>>>> catch-all = yes >>>>>>>> max-messages = 0 >>>>>>>> get-url = "http://localhost/sms?phone=%p&text=%a"; >>>>>>>> >>>>>>>> group = sqlbox >>>>>>>> id = sqlbox-db >>>>>>>> smsbox-id = sqlbox >>>>>>>> global-sender = "+919******" >>>>>>>> bearerbox-host = localhost >>>>>>>> bearerbox-port = 13017 >>>>>>>> smsbox-port = 13016 >>>>>>>> smsbox-port-ssl = false >>>>>>>> sql-log-table = sent_sms >>>>>>>> sql-insert-table = send_sms >>>>>>>> log-file = "/var/log/kannel/kannel-sqlbox.log" >>>>>>>> log-level = 0 >>>>>>>> #ssl-client-certkey-file = "" >>>>>>>> #ssl-server-cert-file = "" >>>>>>>> #ssl-server-key-file = "" >>>>>>>> #ssl-trusted-ca-file = "" >>>>>>>> >>>>>>>> # Database connection examples. Please uncomment as needed >>>>>>>> >>>>>>>> # Example MYSQL Connection >>>>>>>> group = mysql-connection >>>>>>>> id = sqlbox-db >>>>>>>> host = localhost >>>>>>>> username = foo >>>>>>>> password = bar >>>>>>>> database = foo >>>>>>>> >>>>>>> >>>>>>> >>>>>> >>>>>> >>>>>> >>>>>> -- >>>>>> Harbhag Singh Sohal >>>>>> Website : http://harbhag.wordpress.com/ >>>>>> >>>>> >>>>> >>>>> >>>>> -- >>>>> Harbhag Singh Sohal >>>>> Website : http://harbhag.wordpress.com/ >>>>> >>>> >>>> >>>> >>>> -- >>>> Harbhag Singh Sohal >>>> Website : http://harbhag.wordpress.com/ >>>> >>> >>> >>> >>> -- >>> Harbhag Singh Sohal >>> Website : http://harbhag.wordpress.com/ >>> >>> >> >> >> >> -- >> Harbhag Singh Sohal >> Website : http://harbhag.wordpress.com/ >> > > -- Harbhag Singh Sohal Website : http://harbhag.wordpress.com/
