Thanks for the command. As it seems the bearebox is supposed to stop at that point.... what I did was this:
bearerbox -v 1 smskannel.conf & >> smsbox -v 1 smskannel.conf & Then I used your command to check and its running ok. Thanks for the help. Alexis C. Tania Petsouka wrote: > > You check status from http://server_ip:admin_port/cgi-bin/status. You have > acces there only when bearbox is up and running. > > P.S: > ----- > > You wrote : >>>> ~/download/gateway-1.4.3/gw/bearerbox -v 1 >>>> ~/download/gateway-1.4.3/gw/smskannel.conf > > To start smsbox you call : ~/download/gateway-1.4.3/gw/smsbox > smskannel.conf > > > > > > > > ----- Original Message ----- > From: "alexis_msn" <alexiscard...@gmail.com> > To: <users@kannel.org> > Sent: Monday, July 25, 2011 1:54 PM > Subject: Re: Need help starting kannel, please help > > >> >> Hi there Tania >> >> Thanks for the reply but I do have the smsc groupt in my smskannel.conf >> file. I didn't put it on the post. Here it is: >> >> group = smsc >> smsc = fake >> smsc-id = FAKE >> port = 10000 >> connect-allow-ip = 127.0.0.1 >> >> So I don't think that's the problem. I need some help understanding how >> this >> works. By the way, do you know the command to check the kannel status? >> Any help will be welcome. >> >> Regards >> Alexis C. >> >> >> >> >> Tania Petsouka wrote: >>> >>> Try to add to your config an smsc group (even the fake one) >>> >>> I guess that it can't find any smsc and it stops there. >>> >>> Tania >>> >>> >>> ----- Original Message ----- >>> From: "alexis_msn" <alexiscard...@gmail.com> >>> To: <users@kannel.org> >>> Sent: Monday, July 25, 2011 1:13 PM >>> Subject: Need help starting kannel, please help >>> >>> >>>> >>>> Hi all, >>>> >>>> I've checked in this forum for answer for my problem but I couldn't >>>> find >>>> one >>>> that cleared my doubts. >>>> I've just installed kannel (made the gzip tarball download in kannel >>>> website) in ubuntu 10.04 LTS. Then I wanted to run the bearerbox and >>>> the >>>> smsbox. I didn't change anything in my smskannel.conf file where the >>>> core >>>> group is: >>>> >>>> group = core >>>> admin-port = 13000 >>>> smsbox-port = 13001 >>>> admin-password = bar >>>> #status-password = foo >>>> #admin-deny-ip = "" >>>> #admin-allow-ip = "" >>>> #log-file = "/tmp/kannel.log" >>>> #log-level = 0 >>>> box-deny-ip = "*.*.*.*" >>>> box-allow-ip = "127.0.0.1" >>>> #unified-prefix = "+358,00358,0;+,00" >>>> #access-log = "/tmp/access.log" >>>> #store-file = "kannel.store" >>>> #ssl-server-cert-file = "cert.pem" >>>> #ssl-server-key-file = "key.pem" >>>> #ssl-certkey-file = "mycertandprivkeyfile.pem" >>>> >>>> And the smsbox group is: >>>> >>>> group = smsbox >>>> bearerbox-host = 127.0.0.1 >>>> sendsms-port = 13013 >>>> global-sender = 13013 >>>> #sendsms-chars = "0123456789 +-" >>>> #log-file = "/tmp/smsbox.log" >>>> #log-level = 0 >>>> #access-log = "/tmp/access.log" >>>> >>>> So as you can see I did not change a thing yet. Still when I tried this >>>> command: >>>> >>>> ~/download/gateway-1.4.3/gw/bearerbox -v 1 >>>> ~/download/gateway-1.4.3/gw/smskannel.conf >>>> >>>> I get this result: >>>> >>>> 2011-07-24 22:35:51 [15596] [0] INFO: Debug_lvl = 1, log_file = <none>, >>>> log_lvl = 0 >>>> 2011-07-24 22:35:51 [15596] [0] WARNING: DLR: using default 'internal' >>>> for >>>> storage type. >>>> 2011-07-24 22:35:51 [15596] [0] INFO: DLR using storage type: internal >>>> 2011-07-24 22:35:51 [15596] [0] INFO: SSL not supported, no SSL >>>> initialization done. >>>> 2011-07-24 22:35:51 [15596] [0] INFO: HTTP: Opening server at port >>>> 13000. >>>> 2011-07-24 22:35:51 [15596] [0] INFO: BOXC: 'smsbox-max-pending' not >>>> set, >>>> using default (100). >>>> 2011-07-24 22:35:51 [15596] [0] INFO: Set SMS resend frequency to 60 >>>> seconds. >>>> 2011-07-24 22:35:51 [15596] [0] INFO: SMS resend retry set to >>>> unlimited. >>>> 2011-07-24 22:35:51 [15596] [0] INFO: DLR rerouting for smsc id <FAKE> >>>> disabled. >>>> 2011-07-24 22:35:51 [15596] [0] INFO: >>>> ---------------------------------------- >>>> 2011-07-24 22:35:51 [15596] [0] INFO: Kannel bearerbox II version 1.4.3 >>>> starting >>>> 2011-07-24 22:35:51 [15596] [0] INFO: MAIN: Start-up done, entering >>>> mainloop >>>> >>>> It simply stops at this mainloop. Is this normal? Please bear in mind >>>> that >>>> I'm new with this thing and I simply want to learn to use kannel as a >>>> sms >>>> plataform. >>>> >>>> Thank you for your attention and my apologies if there is a post >>>> regarding >>>> this same issue that I missed when looking. >>>> >>>> Alexis C. >>>> -- >>>> View this message in context: >>>> http://old.nabble.com/Need-help-starting-kannel%2C-please-help-tp32128784p32128784.html >>>> Sent from the Kannel - User mailing list archive at Nabble.com. >>>> >>>> >>> >>> >>> >>> >> >> -- >> View this message in context: >> http://old.nabble.com/Need-help-starting-kannel%2C-please-help-tp32128784p32130688.html >> Sent from the Kannel - User mailing list archive at Nabble.com. >> >> > > > > -- View this message in context: http://old.nabble.com/Need-help-starting-kannel%2C-please-help-tp32128784p32131010.html Sent from the Kannel - User mailing list archive at Nabble.com.
