Some Nokia phone don't support the AT+CNMI command. Try to remove it completely from your config and use sim-buffering in stead.
== Rene -----Original Message----- From: users-boun...@kannel.org [mailto:users-boun...@kannel.org] On Behalf Of Tuomas Koski Sent: Tuesday, 13 December, 2011 21:19 To: users@kannel.org Subject: Help with Nokia 6210 Navigator Hi guys, does anyone here have managed to get Nokia 6210 Navigator to work with Kannel 1.5.0 to SEND sms? If yes, could you please post your working conf? Here is my "current" conf (after trying all examples I found from web) which does not work: group = core admin-port = 13000 admin-password = bar admin-deny-ip = "*.*.*.*" admin-allow-ip = "" wapbox-port = 13002 wdp-interface-name = "*" log-file = "/var/log/kannel/bearerbox.log" box-deny-ip = "*.*.*.*" box-allow-ip = "127.0.0.1" group = wapbox bearerbox-host = localhost log-file = "/var/log/kannel/wapbox.log" group = smsc smsc-id = SMSC_01 smsc = at modemtype = nokiaphone speed = 19200 device = /dev/ttyACM0 log-file = "/var/log/kannel/smsc.log" log-level = 0 keepalive = true group = modems id = nokiaphone name = "Nokia Phone" need-sleep = true #sendline-sleep = 1000 init-string = "AT+CNMI=1,2,0,1,0" keepalive-cmd = "AT+CBC;+CSQ" enable-mms = true This is the log from smsc.log: 2011-12-13 21:11:01 [9154] [4] INFO: AT2[SMSC_01]: opening device 2011-12-13 21:11:01 [9154] [4] DEBUG: AT2[SMSC_01]: device opened. Telnet mode = 0 2011-12-13 21:11:01 [9154] [4] DEBUG: AT2[SMSC_01]: device opened 2011-12-13 21:11:01 [9154] [4] INFO: AT2[SMSC_01]: Logging in 2011-12-13 21:11:01 [9154] [4] INFO: AT2[SMSC_01]: init device 2011-12-13 21:11:01 [9154] [4] INFO: AT2[SMSC_01]: speed set to 19200 2011-12-13 21:11:01 [9154] [4] DEBUG: AT2[SMSC_01]: --> ATZ^M 2011-12-13 21:11:01 [9154] [4] DEBUG: AT2[SMSC_01]: <-- OK 2011-12-13 21:11:01 [9154] [4] DEBUG: AT2[SMSC_01]: --> AT^M 2011-12-13 21:11:01 [9154] [4] DEBUG: AT2[SMSC_01]: <-- AT 2011-12-13 21:11:01 [9154] [4] DEBUG: AT2[SMSC_01]: <-- OK 2011-12-13 21:11:01 [9154] [4] DEBUG: AT2[SMSC_01]: --> AT&F^M 2011-12-13 21:11:02 [9154] [4] DEBUG: AT2[SMSC_01]: <-- AT&F 2011-12-13 21:11:02 [9154] [4] DEBUG: AT2[SMSC_01]: <-- OK 2011-12-13 21:11:02 [9154] [4] DEBUG: AT2[SMSC_01]: --> ATE0^M 2011-12-13 21:11:02 [9154] [4] DEBUG: AT2[SMSC_01]: <-- ATE0 2011-12-13 21:11:02 [9154] [4] DEBUG: AT2[SMSC_01]: <-- OK 2011-12-13 21:11:02 [9154] [4] DEBUG: AT2[SMSC_01]: --> AT+IFC=2,2^M 2011-12-13 21:11:02 [9154] [4] DEBUG: AT2[SMSC_01]: <-- OK 2011-12-13 21:11:02 [9154] [4] DEBUG: AT2[SMSC_01]: --> AT+CPIN?^M 2011-12-13 21:11:02 [9154] [4] DEBUG: AT2[SMSC_01]: <-- +CPIN: READY 2011-12-13 21:11:02 [9154] [4] DEBUG: AT2[SMSC_01]: <-- OK 2011-12-13 21:11:02 [9154] [4] DEBUG: AT2[SMSC_01]: --> AT+CSCA="+491770610000"^M 2011-12-13 21:11:02 [9154] [4] DEBUG: AT2[SMSC_01]: <-- OK 2011-12-13 21:11:02 [9154] [4] DEBUG: AT2[SMSC_01]: --> AT+CMGF=0^M 2011-12-13 21:11:02 [9154] [4] DEBUG: AT2[SMSC_01]: <-- OK 2011-12-13 21:11:02 [9154] [4] DEBUG: AT2[SMSC_01]: --> AT+CSMS=?^M 2011-12-13 21:11:02 [9154] [4] DEBUG: AT2[SMSC_01]: <-- +CSMS: (0) 2011-12-13 21:11:02 [9154] [4] DEBUG: AT2[SMSC_01]: <-- OK 2011-12-13 21:11:02 [9154] [4] DEBUG: AT2[SMSC_01]: --> AT+CNMI=1,2,0,1,0^M 2011-12-13 21:11:02 [9154] [4] DEBUG: AT2[SMSC_01]: <-- ERROR 2011-12-13 21:11:02 [9154] [4] ERROR: AT2[SMSC_01]: Generic error: ERROR 2011-12-13 21:11:02 [9154] [4] ERROR: AT2[SMSC_01]: Initialization of device failed. 2011-12-13 21:11:02 [9154] [4] INFO: AT2[SMSC_01]: Closing device 2011-12-13 21:11:02 [9154] [4] ERROR: AT2[SMSC_01]: Couldn't connect (retrying in 10 seconds). Any idea what could be the correct value instead of "AT+CNMI=1,2,0,1,0" ? All help would be highly appreciated. Cheers, Tuomas
