OpenSMPPBox can be connected to smsbox or sqlbox, not bearerbox directly. bearerbox is used to operate with smsc connections, whilst smsbox or sqlbox used to send messages.
OpenSMPPBox acts like a proxy, it's not a standalone server, so it needs to be connected either to smsbox or sqlbox. There is just a confusion due used variables in the configuration file I think.. Correct me If I am wrong. In the configuration example posted by Christopher OpenSMPPBox is connected to SQLBox: >group = opensmppbox > opensmppbox-id = send_hsl_smpp > opensmppbox-port = 12090 > bearerbox-host = localhost *> bearerbox-port = *12005* * > group = sqlbox > id = send_sqlbox > smsbox-id = send_sqlbox > bearerbox-host = localhost > bearerbox-port = *12001* *> smsbox-port = *12005** > smsbox-port-ssl = false 2012/8/7 Milan P. Stanic <m...@arvanta.net> > On Tue, 2012-08-07 at 10:41, Christopher Burke wrote: > > The opensmppbox appears in the bearerbox as an smsbox, therefore I > > So, it is connected to bearerbox and not to to SQLBox as you told in > your previous e-mail. > AFAIK opensmppbox cannot be connected to SQLBox. Please prove me wrong. > > If you connect it to bearerbox and connect SQLBox to bearerbox to, you > can say that the opensmppbox and sqlbox are (inter)connected but > opensmppbox does not know anything about sqlbox. > > I'm writing this mail not to bash you but to explain that the > opensmppbox can only be connected to bearerbox, which is clearly > depicted and described in (opensmppbox) documentation. > > > setup as I would an smsbox connected to a sqlbox. Configurations are > > below; but if this is not how it's designed possibly I done > > something wrong or I can expect some undesired results. > > > > *The opensmppbox configuration: * > > cb@MOBILEWORKBOX:~$ sudo cat > > /etc/kannel/internal/smppboxes/send_hsl/send/send.conf > > ############################################################ > > # KANNEL CONFIGURATION # > > # Christopher Burke <christopher.bu...@simulity.com> # > > ############################################################ > > > > include=/etc/kannel/internal/bearerboxes/send_hsl/send/send.conf > > > > ############################################################ > > # SMPPBOX Connections # > > ############################################################ > > > > group = opensmppbox > > opensmppbox-id = send_hsl_smpp > > opensmppbox-port = 12090 > > bearerbox-host = localhost > > bearerbox-port = *12005* > > log-level = 0 > > log-file = > > /var/log/kannel/send_hsl/send/log_smppbox.log > > our-system-id = send_hsl_smpp > > route-to-smsc = send_hsl > > smpp-logins = > > /etc/kannel/internal/smppboxes/smpplogins.txt > > box-dlr-storage = mysql > > > > ############################################################ > > # mysql Connections # > > ############################################################ > > > > group = mysql-connection > > id = mydlr > > host = localhost > > username = root > > password = root > > database = SEND_HSL_SMPP > > max-connections = 20 > > > > ############################################################ > > # dlrmysql Connections # > > ############################################################ > > > > group = dlr-db > > id = mydlr > > table = smppdlr > > field-smsc = smsc > > field-timestamp = ts > > field-destination = destination > > field-source = source > > field-service = service > > field-url = url > > field-mask = mask > > field-status = status > > field-boxc-id = boxcid > > > > *The SQLBox Configuration:* > > cb@MOBILEWORKBOX:~$ sudo cat > > /etc/kannel/internal/sqlboxes/send_hsl/send/send.conf > > ############################################################ > > # KANNEL CONFIGURATION # > > # Christopher Burke <christopher.bu...@simulity.com> # > > ############################################################ > > > > ############################################################ > > # SQLBOX GROUP # > > ############################################################ > > > > group = sqlbox > > id = send_sqlbox > > smsbox-id = send_sqlbox > > bearerbox-host = localhost > > bearerbox-port = *12001* > > smsbox-port = *12005* > > smsbox-port-ssl = false > > sql-log-table = sent_sms > > sql-insert-table = send_sms > > log-file = > > /var/log/kannel/send_hsl/send/log_sqlbox.log > > log-level = 0 > > > > group = mysql-connection > > id = send_sqlbox > > host = localhost > > username = root > > password = root > > database = SEND_HSL_SQLBOX > > > > *The SMPP/SMSC/Bearerbox configuration:* > > cb@MOBILEWORKBOX:~$ sudo cat > > /etc/kannel/internal/bearerboxes/send_hsl/send/send.conf > > ############################################################ > > # KANNEL CONFIGURATION # > > # Christopher Burke <christopher.bu...@simulity.com> # > > ############################################################ > > > > group = smsbox > > > > ############################################################ > > # CORE GROUP # > > ############################################################ > > > > group = core > > admin-port = 12000 > > smsbox-port = *12001* > > admin-password = foobarz > > log-file = > > /var/log/kannel/send_hsl/send/log_bearerbox.log > > access-log = > > /var/log/kannel/send_hsl/send/acc_bearerbox.log > > log-level = 0 > > box-deny-ip = "*.*.*.*" > > box-allow-ip = "*.*.*.*" > > > > ############################################################ > > # SMSC GROUP # > > ############################################################ > > > > group = smsc > > smsc = smpp > > smsc-id = send_hsl > > host = a.b.c.d > > port = abcd > > transceiver-mode = false > > smsc-username = "foo" > > smsc-password = "bar" > > system-type = "SMPP" > > address-range = "12345678901" > > source-addr-ton = 1 > > source-addr-npi = 1 > > dest-addr-ton = 1 > > dest-addr-npi = 1 > > bind-addr-ton = 1 > > bind-addr-npi = 1 > > > > > > On 07/08/12 10:27, Milan P. Stanic wrote: > > >On Tue, 2012-08-07 at 09:57, Christopher Burke wrote: > > >>Hi Guys, > > >> > > >>Just thought I'd wrap up on this issue as it's now solved. > > >> > > >>1. You can connect an OpenSMPPBox to a SQLBox > > >If that is true then Rene (Kluwen) should update opensmppbox > > >documetation with the description of SQLBox parameters and update > > >diagram in SMPPBox.png > > > > > >>2. The reason I could not connect was because I had the "vma" string > > >>as lower case in the smpplogins file, but upper case in the > > >>configuration file > > >Could you post your config section where you define 'SQLBox' parameters, > > >please? > > > > > >>Thanks again! > > >> > > >>Chris > > >> > > >>On 03/08/12 17:51, Milan P. Stanic wrote: > > >>>On Fri, 2012-08-03 at 17:05, Christopher Burke wrote: > > >>>>Hi, > > >>>> > > >>>>Using the latest from SVN - perhaps I'll try to add the VMA into the > > >>>>smpplogins.txt and see if that works. > > >>>> > > >>>>Are you communicating directly to the bearerbox or to a sqlbox? > > >>>Is it possible for opensmppbox to communicate/connect anything than > > >>>bearerbox? > > >>>>Kind Regards and Thanks in Advance, > > >>>> > > >>>>Chris > > >>>> > > >>>>On 03/08/12 16:10, Milan P. Stanic wrote: > > >>>>>On Fri, 2012-08-03 at 14:42, Christopher Burke wrote: > > >>>>>>Thanks for your response. My smpplogins is as follows: > > >>>>>> > > >>>>>>username internal 127.0.0.1 > > >>>>>Which version of the opensmppbox you use? > > >>>>> > > >>>>>I have next line in my smpplogings.txt file: > > >>>>>xxxx yyyy vma 127.0.0.1 > > >>>>>where xxxx is username and yyyy is password. > > >>>>> > > >>>>>>-rw-rw-rw- 1 root root 28 Aug 3 14:40 smpplogins.txt > > >>>>>> > > >>>>>>Does this look okay to you? > > >>>>>> > > >>>>>>Kind Regards, > > >>>>>> > > >>>>>>Christopher > > >>>>>> > > >>>>>>On 03/08/12 10:48, Artem Chekulaev wrote: > > >>>>>>>Hi > > >>>>>>> > > >>>>>>>I had the same issue. Try to delete your smpplogins.txt (or where > > >>>>>>>you store your logins) and create it again from emtpy and fill it > > >>>>>>>carefully, not from example. In my case it was rights-to-read-file > > >>>>>>>issue too - Kannel had no rights to any access that file > > >>>>>>> > > >>>>>>>2012/8/3 Christopher Burke <christopher.bu...@simulity.com > > >>>>>>><mailto:christopher.bu...@simulity.com>> > > >>>>>>> > > >>>>>>> Hi, > > >>>>>>> > > >>>>>>> I've been attempting to connect an opensmppbox to my > > >>>>>>> configuration, however I am getting the following errors: > > >>>>>>> > > >>>>>>> 2012-08-03 10:19:06 [10282] [6] ERROR: SMPP[recv_smpp]: SMSC > > >>>>>>> rejected login to transmit, code 0x0000000d (Bind Failed). > > >>>>>>> 2012-08-03 10:19:06 [10282] [6] ERROR: SMPP[recv_smpp]: > Couldn't > > >>>>>>> connect to SMS center (retrying in 10 seconds). > > >>>>>>> > > >>>>>>> What is a likely cause of this issue? I can post my > configuration > > >>>>>>> files and detailed logs if needed. > > >>>>>>> > > >>>>>>> Kind Regards and Thanks in Advance, > > >>>>>>> > > >>>>>>> Chris > > >>>>>>> > > >>>>-- > > >>>>*Christopher Burke* > > >>>>Development Team Leader / Software Engineer > > >>>>http://simulity.com > > >>>>Mobile: +44 7590 571 833 > > >>>>Skype:krslynx > > >>>>NOTICE: This message contains privileged & confidential information > > >>>>intended only for the use of the addressee named above. If you are > > >>>>not the intended recipient of this message, you are hereby notified > > >>>>that you must not disseminate, copy or take any action in reliance > > >>>>on it. If you have received this message in error, please notify > > >>>>Simulity Labs immediately. Any views expressed in this message are > > >>>>those of the individual sender except where the sender specifically > > >>>>states them to be the view of Simulity Labs > > >>-- > > >>*Christopher Burke* > > >>Development Team Leader / Software Engineer > > >>http://simulity.com > > >>Mobile: +44 7590 571 833 > > >>Skype:krslynx > > >>NOTICE: This message contains privileged & confidential information > > >>intended only for the use of the addressee named above. If you are > > >>not the intended recipient of this message, you are hereby notified > > >>that you must not disseminate, copy or take any action in reliance > > >>on it. If you have received this message in error, please notify > > >>Simulity Labs immediately. Any views expressed in this message are > > >>those of the individual sender except where the sender specifically > > >>states them to be the view of Simulity Labs > > > > -- > > *Christopher Burke* > > Development Team Leader / Software Engineer > > http://simulity.com > > Mobile: +44 7590 571 833 > > Skype:krslynx > > NOTICE: This message contains privileged & confidential information > > intended only for the use of the addressee named above. If you are > > not the intended recipient of this message, you are hereby notified > > that you must not disseminate, copy or take any action in reliance > > on it. If you have received this message in error, please notify > > Simulity Labs immediately. Any views expressed in this message are > > those of the individual sender except where the sender specifically > > states them to be the view of Simulity Labs > > -- > Kind regards, Milan > -------------------------------------------------- > Arvanta, http://www.arvanta.net > Please do not send me e-mail containing HTML code or documents in > proprietary format (word, excel, pps and so on) > >
