Hi
Modem log, when not defined specifically goes into bearerbox.
It is better to have it separate for each smsc. Therefore add the following
lines to you smsc/at config
#Smsc
group = smsc
smsc = at
...
log-level = 0
log-file = "/var/log/kannel/modem.log"
...
You will have an additional log with only modem info.
Also as per your /dev/ you should change:
device = /dev/ttyUSB2
to device = /dev/ttyUSB0 or device = /dev/ttyUSB1
And test which one corresponds to AT port.
Regards
Alvaro
|-----------------------------------------------------------------------------------------------------------------|
Envíe y Reciba Datos y mensajes de Texto (SMS) hacia y desde cualquier
celular y Nextel
en el Perú, México y en mas de 180 paises. Use aplicaciones 2 vias via SMS
y GPRS online
Visitenos en www.perusms.com
On Fri, May 15, 2015 at 10:59 AM, Equipe Support <p...@onlynetworks.net>
wrote:
> Hi,
>
> Thank you for your help.
>
> Actually I made dmesg| grep tty - the result :
>
>
> I have 2 ports for USB key ...
>
> Well, I very knew for me Kannel, sms sending ... but I need to make it
> work.
>
> What you meen bye "modem logs" : bearerbox log, smsbox log or minicom logs
> ?
>
> Thank you for your help.
>
> Best regards.
>
> Philippe.
>
>
>
>
> -----Original Message-----
> From: Alvaro Cornejo <cornejo.alv...@gmail.com>
> To: Equipe Support <p...@onlynetworks.net>
> Cc: kannel_dev_mailinglist <de...@kannel.org>, annou...@kannel.org, users
> <users@kannel.org>
> Date: Thu, 14 May 2015 10:27:30 -0500
> Subject: Re: CMS error 500
>
> Hi
>
> It is normal that USB modems appears more than once on the tty. You should
> check which tty correspond to the AT command port. Those ports usually does
> not change, unless you remove/reinsert the usb to the PC. This is a Linux
> kernel issue, not kannels. There are some hacks on internet about how to
> remediate this.
>
> What I don't understand is what do you change with minicom?
>
> About messages not being deleted, are you talking about incomming or
> outgoing? Usually it only stores outgoing until confirmed by smsc that it
> has received then is automatically deleted. In the case of incomming, it is
> done "manually" You can try to set sim-buffering = true to have kannel
> lokk for incomming and process them. even if you don't care about them you
> need to freeup modem memory. Just have kannel process them and send them to
> trash.
>
> bearerbox being unable to communicate with the modem could be caused by
> modem memory being full.
>
> About alerts, kannel have not a way to check this. You can however do two
> things:
>
> - Use admin interface to monitor kannel queues and generate alarms parsing
> that info.
> - Parse kannel logs to look for AT errors.
>
> Hope helps.
>
> If need more help, please post modem logs.
>
> Regards
>
> Alvaro
>
>
>
> |-----------------------------------------------------------------------------------------------------------------|
> Envíe y Reciba Datos y mensajes de Texto (SMS) hacia y desde cualquier
> celular y Nextel
> en el Perú, México y en mas de 180 paises. Use aplicaciones 2 vias via SMS
> y GPRS online
> Visitenos en www.perusms.com
>
> On Thu, May 14, 2015 at 1:06 AM, Equipe Support <p...@onlynetworks.net>
> wrote:
>>
>> Hello,
>>
>> We use Kannel v1.4.3 installed on Ubuntu server 14.04.1 with a 3G Huawei
>> E1522 USB key.
>>
>> We use Kannel only for shipments of SMS via HTTP. No reception.
>>
>> We find that for 2-3 days it works well, then the messages are stored in
>> the queue and are not sent.
>>
>> *We have 2 types of errors:*
>>
>> *1: CMS Error: unknown error 500 = -> Sim storage maybe it full?*
>>
>> *2nd: bearerbox can't connect to the USB modem.*
>>
>> We also found that in Linux, our 3G Huawei key appears 2 times: ttyUSB1
>> and ttyUSB2.
>>
>> The solution we found for now: stop Kannel services, change the modem in
>> *minicom
>> *with ttyUSB1 or ttyUSB2, modify kannel.conf (with ttyUSBxx modem) and
>> restart bearebox and SMSBOX.
>>
>> Could you help us with this problem please? It is very important to us?
>>
>> Another thing: can we set the alerts (eg by email) when SMS messages are
>> not sent and stored in the queue?
>>
>> Thank you find enclosed our Kannel configuration file and file logs.
>>
>> Waiting for your reply.
>>
>> Best regards.
>>
>>
>> <http://www.onlynetworks.net>
>>
>>
>
