make this entry to sms-resend-retry = 1 and let us know the result. BR Tapan Thapa
On Thu, May 28, 2015 at 3:16 PM, Ammar Ali <ammarali3...@gmail.com> wrote: > Hello Tapan, > > First of all thanks for your reply. > > Before I month my setup was: > > [group=core] > sms-resend-freq = 60 > sms-resend-retry = -1 > [group=smsc] > wait-ack = 60 > wait-ack-expire = 0x01 > > > But some days ago I have updated this setup with below values: > > [group=core] > #sms-resend-freq = 120 > #sms-resend-retry = 5 > [group=smsc] > wait-ack-expire = 0x02 > > I have noticed that this problem is occured when queue on smsc connection. > > *SMSC*[SMSC] SMPP:XXX.XXX.XXX.XXX:XXXX/XXXX:XXXXX:SMPP (online 7698s, > rcvd: sms 0 (0.00,0.00,0.00) / dlr 2092 (0.59,0.47,0.03), sent: sms 1055 > (1.01,0.30,0.02) / dlr 0 (0.00,0.00,0.00), failed 0, *queued 0 msgs*) > > > So please suggest me what to do. > > > > > *Thanks* > > *Ammar Ali* > *Pune (M.H.)* > > > On Thu, May 28, 2015 at 3:05 PM, Tapan Kumar Thapa < > tapan.thapa2...@gmail.com> wrote: > >> Dear Amar, >> >> In the morning, i suggested to try below. Have you tried this? >> >> [group=core] >> sms-resend-freq = 60 #(default) >> sms-resend-retry = 1 # Send sms only once. No retry >> [group=smsc] >> wait-ack = 60 #(default) >> wait-ack-expire = 0x01 #(default) >> >> Regards >> Tapan Thapa >> >> On Thu, May 28, 2015 at 3:01 PM, Ammar Ali <ammarali3...@gmail.com> >> wrote: >> >>> Hello Team, >>> >>> I am sending sms through http application using kannel. >>> >>> But I'm getting multiple messages on particular number. >>> >>> This is my setup: >>> >>> *bearerbox.conf* >>> group = core >>> admin-port = "13000" >>> admin-port-ssl="no" >>> admin-password = "xxxx" >>> status-password = "xxxx" >>> admin-deny-ip="*.*.*.*" >>> admin-allow-ip="*.*.*.*" >>> smsbox-interface ="127.0.0.1" >>> smsbox-port = "13001" >>> log-file = "/var/logs/kannel1.log" >>> log-level = "0" >>> access-log = "/var/logs/access1.access" >>> dlr-storage = "mysql" >>> sms-incoming-queue-limit = -1 >>> sms-outgoing-queue-limit = 100000 >>> smsbox-max-pending = 100 >>> sms-resend-freq = 120 >>> sms-resend-retry = 5 >>> >>> *smsc.conf* >>> group = smsc >>> smsc = "smpp" >>> smsc-id = "SMSC" >>> log-file = "/var/SMSC_LOG1.log" >>> log-level = "0" >>> host = xxx.xxx.xxx.xxx >>> port = "xxx" >>> smsc-username = "xxxxxxx" >>> smsc-password = "xxxxxxx" >>> allowed-smsc-id = "SMSC" >>> preferred-smsc-id = "SMSC" >>> source-addr-ton = "0" >>> source-addr-npi = "1" >>> dest-addr-ton = "1" >>> dest-addr-npi = "1" >>> service-type = "CMT" >>> system-type = "SMPP" >>> alt-charset="UTF-8" >>> alt-addr-charset = "GSM" >>> bind-addr-ton = "0" >>> bind-addr-npi = "0" >>> enquire-link-interval = "120" >>> reconnect-delay = "10" >>> transceiver-mode = "true" >>> interface-version = "34" >>> connection-timeout = "0" >>> throughput = "100" >>> wait-ack-expire=0x02 >>> reroute-dlr=1 >>> >>> *Kannel Monitor:* >>> >>> SMS: received 0 (0 queued), sent 1055 (*0 queued*), store size -1 >>> SMS: inbound (0.00,0.00,0.00) msg/sec, outbound (1.01,0.30,0.02) msg/sec >>> >>> DLR: received 2092, sent 0 >>> DLR: inbound (0.59,0.47,0.03) msg/sec, outbound (0.00,0.00,0.00) msg/sec >>> DLR: 764 queued, using mysql storage >>> >>> Box connections: >>> smsbox:sqlbox1, IP 127.0.0.1 (*0 queued*), (on-line 0d 18h 40m 35s) >>> SMSC connections: >>> *SMSC*[SMSC] SMPP:XXX.XXX.XXX.XXX:XXXX/XXXX:XXXXXXX:VMA (online, >>> rcvd: sms 0 (0.00,0.00,0.00) / dlr 0 (0.00,0.00,0.00), sent: sms 0 >>> (0.00,0.00,0.00) / dlr 0 (0.00,0.00,0.00), failed 0, *queued 0 msgs*) >>> >>> >>> So please check my configuration and let me know what should be my >>> setting for this required setup. >>> >>> One more thing I'm facing this problem because of queue shows on SMSC >>> connection. >>> >>> >>> >>> >>> >>> *Thanks* >>> >>> *Amaar Ali* >>> *Pune (M.H.)* >>> >> >> >