2016-02-11 7:31 GMT+03:00 Беляев Владимир Николаевич <v.bely...@sngb.ru>:
> While you can install one primary center and the other - a reserve that it > went SMS only in case of unavailability of the ground? > If I got you right you want to have multiple SMSC connections and balance between them if ONLY one of the link goes down? You can do this if you assign different smsc-id for each SMSC connection and specify smsc-id at your application level, e.g.: for smsbox: http://.../sendsms?receiver=...&smsc_id=smscid1 sendsms?receiver=...&smsc_id=smscid2 or for sqlbox: you can just set smsc-id="smscid1" upon INSERT. You can monitor current state of SMSC uplinks via berearebox status page. > > -- > С уважением, > Беляев В.Н. > > -----Original Message----- > From: users [mailto:users-boun...@kannel.org] On Behalf Of Milan P. Stanic > Sent: Wednesday, February 10, 2016 11:05 PM > To: users@kannel.org > Subject: Re: Not work "priority" in settings SMSC > > On Wed, 2016-02-10 at 16:31, Беляев Владимир Николаевич wrote: > > Option does not work "priority" in settings SMSC. > > > > I set up the SMSC1 priority=0, SMSC2 priority=3, but SMS is > > distributed evenly. > > > > Why can this be? > > I don't have time to look into the code but from memory I think that the > priority parameter is for setting default message priority for particular > SMSC and is not global parameter which set priorities between SMSCs. But, I > could be wrong. > > > Kannel 1.5.0 > > > > Config: > > group=smsc > > smsc=smpp > > > > smsc-id=devino_mrk > > > > system-type= > > > > interface-version=34 > > > > enquire-link-interval=270 > > > > source-addr-ton=5 > > > > source-addr-npi=1 > > > > dest-addr-ton=1 > > > > dest-addr-npi=1 > > > > msg-id-type=0x00 > > > > log-file="/var/log/kannel/devino_mrk.log" > > > > log-level=0 > > > > priority=0 > > > > > > > > # СМС-Трафик тест > > > > group=smsc > > > > smsc=smpp > > > > smsc-id=smstraffic_test > > > > system-type=smpp > > > > interface-version=34 > > > > enquire-link-interval=270 > > > > source-addr-ton=1 > > > > source-addr-npi=1 > > > > dest-addr-ton=1 > > > > dest-addr-npi=1 > > > > msg-id-type=0x00 > > > > log-file="/var/log/kannel/smstraffic_test.log" > > > > log-level=0 > > > > priority=3 > > > > > >
