Hi, I've an annoying problem and I don't know why it happens. Lispmob used to work but not anymore. It registers correctly, I use OpenDNS and google DNS, I've no firewalls setup either on my laptop or in the modem. I can see with wireshark DNS requests coming out of ppp0 (running pppoe) but no answer come back. I've joined an output of the lispmob trunk version but I have the same problem (and same error message) with the current official version of lispmob.org 0.3.1. (btw, lispd -v returns a wrong version 3.0.0 number in every case, whereas the log displays a correct version).
This is a message that comes back often.
"DEBUG-2: The entry 82.121.106.94 is not found in the data base" <-
this IP being my dynamic public IP= RLOC (it may not be the same RLOC
in the log), I found weird that lispmob does not know it.
Here is my routing table :
Destination Gateway Genmask Flags Metric Ref Use Iface
0.0.0.0 0.0.0.0 128.0.0.0 U 0 0 0 lispTun0
0.0.0.0 0.0.0.0 0.0.0.0 U 0 0 0 ppp0
128.0.0.0 0.0.0.0 128.0.0.0 U 0 0 0 lispTun0
193.253.160.3 0.0.0.0 255.255.255.255 UH 0 0 0 ppp0
teto@tatooine:~$ ip addr list
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 16436 qdisc noqueue state UNKNOWN
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
inet 127.0.0.1/8 scope host lo
inet6 ::1/128 scope host
valid_lft forever preferred_lft forever
2: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast
state UP qlen 1000
link/ether 48:5b:39:3d:1a:9c brd ff:ff:ff:ff:ff:ff
inet6 fe80::4a5b:39ff:fe3d:1a9c/64 scope link
valid_lft forever preferred_lft forever
3: wlan0: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN qlen 1000
link/ether 1c:4b:d6:8b:c7:f6 brd ff:ff:ff:ff:ff:ff
5: ppp0: <POINTOPOINT,MULTICAST,NOARP,UP,LOWER_UP> mtu 1492 qdisc
pfifo_fast state UNKNOWN qlen 3
link/ppp
inet 82.121.108.252 peer 193.253.160.3/32 scope global ppp0
9: lispTun0: <POINTOPOINT,UP,LOWER_UP> mtu 1440 qdisc pfifo_fast state
UNKNOWN qlen 500
link/none
inet 153.16.49.112/32 scope global lispTun0
I am at yoru disposal for further tests
Best regards
MAtthieu
lispmob.log
Description: Binary data
