Thanks Albert! That was the problem.
I had to set
net.ipv4.conf.default.rp_filter=0
net.ipv4.conf.all.rp_filter=0
net.ipv4.ip_forward=1
net.ipv6.conf.all.forwarding=1
in /etc/sysctl.conf and restart, as changing those values during
runtime did not make a difference.
Congratulations on the new release! I am eager to test multihoming.
Regards,
Artur
On 16 May 2013 11:44, Albert López <[email protected]> wrote:
> Dear Artur,
>
> Have you checked if rp_filter is set to 0 and ip_forward set to 1? You can
> find extra information about this configuration in the README file. You
> should also remove the IPv6 address of the map rersolver configuration as it
> doesn't exists in the LISP beta network.
> I also would like to announce you that yesterday we released a new version
> of LISPmob which implements multihoming support and interface management.
>
> Best regards
>
> Albert L.
>
>
>
>
> On 05/15/2013 06:23 PM, Artur Skonecki wrote:
>>
>> I am doing my testing on Alix 0.9 and u12.04 boxes.
>> Pinging 153.16.10.11 does not work.
>>
>> I've tried to debug it a little:
>>
>> ## there are only 217.97.133.68 (self) and 153.16.22.196
>> (database-mapping) as src in lispd log
>> # ./lispmob-mn/lispd/lispd -f lispd-mn2.conf > /tmp/tmp
>> # grep --line-buffered Received -A1 /tmp/tmp |grep --line-buffered 'src'
>> DEBUG-3: OUTPUT: Orig src: 217.97.133.68 | Orig dst: 217.8.97.6
>> DEBUG-3: OUTPUT: Orig src: 153.16.22.196 | Orig dst: 10.10.129.1
>> ..
>>
>> ## tcpdump shows Rx Tx transmission with 217.8.97.6
>> # sudo tcpdump -nvvXSs 0 -c100 -i eth0 host 217.8.97.6
>> 17:47:08.802048 IP (tos 0x0, ttl 64, id 0, offset 0, flags [DF], proto UDP
>> (17), length 120)
>> 217.97.133.68.4342 > 217.8.97.6.4342: [udp sum ok] UDP, length 92
>> 0x0000: 4500 0078 0000 4000 4011 a1c0 d961 8544 E..x..@[email protected]
>> 0x0010: d908 6106 10f6 10f6 0064 ffb9 8000 0000 ..a......d......
>> 0x0020: 4500 0058 d431 0000 ff11 ac83 9910 16c4 E..X.1..........
>> 0x0030: 0a0a 8101 10f6 10f6 0044 2363 1400 0001 .........D#c....
>> 0x0040: fdff b353 0cae f379 0001 9910 16c4 0001 ...S...y........
>> 0x0050: d961 8544 0020 0001 0a0a 8101 0000 000a .a.D............
>> 0x0060: 0120 1000 0000 0001 9910 16c4 0164 ff00 .............d..
>> 0x0070: 0005 0001 d961 8544 .....a.D
>> ...
>>
>> 17:47:08.828959 IP (tos 0x0, ttl 118, id 1798, offset 0, flags [DF], proto
>> UDP (17), length 92)
>> 217.8.97.6.4342 > 217.97.133.68.4342: [udp sum ok] UDP, length 64
>> 0x0000: 4500 005c 0706 4000 7611 64d6 d908 6106 E..\[email protected].
>> 0x0010: d961 8544 10f6 10f6 0048 400b 4000 0001 .a.D.....H@.@...
>> 0x0020: 7794 d760 307d 5677 0001 0014 e2cf 65d5 w..`0}Vw......e.
>> 0x0030: 67e9 0b03 56dd 6707 1987 dd68 cf46 8ef3 g...V.g....h.F..
>> 0x0040: 0000 000a 0120 1000 0000 0001 9910 16c4 ................
>> 0x0050: 0164 ff00 0005 0001 d961 8544
>> ...
>>
>> I am picking up packets from map-server but lispd is not! :(
>>
>>
>> The only error I am getting in lispd log:
>>
>> DEBUG-2: The entry :: is not found in the data base
>> ERR: fordward_native: No output interface found
>> DEBUG-3: Received packet in the tun buffer
>> DEBUG-3: OUTPUT: Orig src: 217.97.133.68 | Orig dst: 173.194.70.125
>>
>> Is it possible that lispmob is failing because of an ipv6 error?
>>
>> I've pasted the entire lispmob log here:
>> https://gist.github.com/skoneka/5585156
>>
>> My current lispd.conf:
>> https://gist.github.com/skoneka/5585230
>>
>> Regards,
>> Artur
>
>
>
