Hello
with Lispmob running I can no longer connect any Internet Site.
Maybe my lispd.conf is wrong.
I edited it to match the style of the example conf-file.
The file is attached as lispd.conf.current.
For the Output see below.
Thank you for your help
Greetings from Bavaria
Maximilian
Lispmob-Version: 0.3.2
OS: Ubuntu Linux 10.04
My allocated EID Data are:
IPv4: 153.16.22.193
IPv6: 2610:d0:1219:192::1
___________________________
Output of Network and Routing:
wmrct@wmh43:~$ ifconfig
eth0 Link encap:Ethernet Hardware Adresse 00:1d:60:90:fd:5f
inet6-Adresse: fe80::21d:60ff:fe90:fd5f/64
Gültigkeitsbereich:Verbindung
UP BROADCAST RUNNING MULTICAST MTU:1500 Metrik:1
RX packets:5045628 errors:0 dropped:0 overruns:0 frame:0
TX packets:2768439 errors:0 dropped:0 overruns:0 carrier:2
Kollisionen:0 Sendewarteschlangenlänge:1000
RX bytes:3008198285 (3.0 GB) TX bytes:204648717 (204.6 MB)
Speicher:dffc0000-e0000000
lispTun0 Link encap:UNSPEC Hardware Adresse
00-00-00-00-00-00-00-00-00-00-00-00-00-00-00-00
inet Adresse:153.16.22.193 P-z-P:153.16.22.193
Maske:255.255.255.255
inet6-Adresse: 2610:d0:1219:192::1/128
Gültigkeitsbereich:Global
UP PUNKTZUPUNKT RUNNING MTU:1440 Metrik:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:100 errors:0 dropped:0 overruns:0 carrier:0
Kollisionen:0 Sendewarteschlangenlänge:500
RX bytes:0 (0.0 B) TX bytes:8428 (8.4 KB)
lo Link encap:Lokale Schleife
inet Adresse:127.0.0.1 Maske:255.0.0.0
inet6-Adresse: ::1/128 Gültigkeitsbereich:Maschine
UP LOOPBACK RUNNING MTU:16436 Metrik:1
RX packets:4584 errors:0 dropped:0 overruns:0 frame:0
TX packets:4584 errors:0 dropped:0 overruns:0 carrier:0
Kollisionen:0 Sendewarteschlangenlänge:0
RX bytes:351280 (351.2 KB) TX bytes:351280 (351.2 KB)
ppp0 Link encap:Punkt-zu-Punkt-Verbindung
inet Adresse:84.145.55.200 P-z-P:217.0.116.94
Maske:255.255.255.255
UP PUNKTZUPUNKT RUNNING NOARP MULTICAST MTU:1492 Metrik:1
RX packets:5209 errors:0 dropped:0 overruns:0 frame:0
TX packets:6145 errors:0 dropped:0 overruns:0 carrier:0
Kollisionen:0 Sendewarteschlangenlänge:3
RX bytes:2412262 (2.4 MB) TX bytes:683542 (683.5 KB)
wmrct@wmh43:~$ ip route
217.0.116.94 dev ppp0 proto kernel scope link src 84.145.55.200
169.254.0.0/16 dev ppp0 scope link metric 1000
0.0.0.0/1 dev lispTun0 proto static
128.0.0.0/1 dev lispTun0 proto static
default via 217.0.116.94 dev ppp0 proto static
Without Lisp:
wmrct@wmh43:~$ ip route
217.0.116.94 dev ppp0 proto kernel scope link src 84.145.55.200
169.254.0.0/16 dev ppp0 scope link metric 1000
default via 217.0.116.94 dev ppp0 proto static
wmrct@wmh43:~$
#
# lispd config
#
debug = 0
map-request-retries = 2 # send 2 before giving up
#
# LISP Config
#
map-resolver = { # intouch-isis
217.8.97.6
}
map-server {
address = 217.8.97.6 # intouch-isis
key-type = 1 # SHA1
key = password
proxy-reply = on # ask ms to proxy reply
}
# Encapsulate packets for non-LISP sites to this Proxy-ETR # intouch-pxtr-1
proxy-etr {
address = 85.184.2.22
priority = 1
weight = 100
}
database-mapping {
eid-prefix = 153.16.22.193/32
interface = ppp0
# interface = eth0
priority_v4 = 1
weight_v4 = 100
priority_v6 = 1
weight_v6 =100
}
database-mapping {
eid-prefix = 2610:d0:1219:192::1/128
interface = ppp0
# interface = eth0
priority_v4 = 1
weight_v4 = 100
priority_v6 = 1
weight_v6 = 100
}
proxy-itrs = {
69.31.31.98, # eqx-ash-pxtr
149.20.48.60, # isc-pxtr
198.6.255.37, # asp-pxtr
129.250.1.63, # ntt-amer-pxtr
85.184.2.22, # intouch-pxtr-1
85.184.2.30, # intouch-pxtr-2
193.162.145.46, # tdc-pxtr
158.38.1.92, # uninett-pxtr
203.181.249.172 # apan-pxtr
}
