Hi Fabio, On Nov 5, 2013, at 1:45 PM, Fabio Martins <[email protected]> wrote:
> Hi users, > > I'm filling my lispd.conf and I got some doubts. If you could help me I will > be very grateful. > > I took a look on this configuration "https://gist.github.com/skoneka/5633141"; > for do mine, and the doubts are: > > 1-What's debug level? The higher the number, the more output lispd generates. If everything works fine, this should be set to 0. However, you should increase it when you are debugging issues, or when you want to send useful bug reports. > 2- why in map resolver he put "fd00:100::1", where this value provide? This is a private address. I assume the guy has a local testbed, with a locally configured map resolver. > 3-In Encapsulated packets for non-LISP sites to this proxy-ETR, how I can > know the address? The address of the ProxyETR? You can look for PETR addresses here http://www.lisp4.net/images/lisp-ddt.pdf You can also use one of the PITRs from the bottom of the file as PETR, check which one has the lowest latency by pinging them all. > 4-EID-loopback where I use? You don't have to use it in the configuration file. If you use LISPmob in router mode, you should use the "loopback" as the EID of the router. > 5-Regarding static map cache how I know eid-prefix andfloc? You can leave this section commented out, unless you know you need it. > 6-Finally "list of PITRs to SMR on handover", it's the same that it's > presented on this configured above? You shouldn't modify the list, unless you know what you're doing. HTH, -Lori > > Thank you so much! > > > Regard, > Fábio Martins
