Hi all, Even though that Ahmed's problem was solved through IRC, let me reply to this message just for list completeness.
To configure RTRs in 0.5, there is only need to include the section for "rtr-ifaces" (and MS/MR, etc). The section "rtr-dabase-mapping" is not needed in general usage. Also let me remind you guys that version 0.5/experimental is not officially supported and it's subject to bugs and easy misconfiguration. You are free to use it at your own risk but we can provide little support for it ;) Alberto On Tue, Sep 16, 2014 at 1:25 PM, Ahmed Medhat <[email protected]> wrote: > Hello All, > > I have used this version for doing service chaining and I have used RTR to > do the service node, I have used this format in the lispmob.conf file: > > > > > > > > > > > > > > > > > > > > > > *# RTR config# rtr-ifaces { rtr-iface { iface = eth0 > } }rtr-database-mapping { eid-prefix = 3.3.3.3/32 > <http://3.3.3.3/32> rloc { address = 10.33.12.3 > priority = 1 weight = 100 }}* > > > > When I run the lispmob.conf, It works but there is an error written in > the beginning: > > *ERR: Configuration file: Error parsing RLOC address 10.33.12.3 * > > > So what is the problem here ? > > Best regards, > Ahmed >
