Controller 1 (IP is 10.0.0.131) HA_ROLE=0 HOSTIPADDRESS=10.0.0.131 HOSTPORTNUM=8789 SERVERIPADDRESS=10.0.0.118 SERVERPORTNUM=8787 MAX_CLIENT_RETRIES=3
Controller 2 (IP is 10.0.0.118) HA_ROLE=1 HOSTIPADDRESS=10.0.0.131 HOSTPORTNUM=8789 SERVERIPADDRESS=10.0.0.118 SERVERPORTNUM=8787 MAX_CLIENT_RETRIES=3 Thanks, Gad _____ From: Kumar Nagendra-G20235 [mailto:[EMAIL PROTECTED] Sent: Monday, November 05, 2007 11:28 PM To: DaMiEn667; [email protected] Subject: RE: [Users] Issues Configuring on MontaVista CGE 4.0.1 Dear Gad, Please send the details of rde_rde_config_file from both the machines with the corresponding IP addresses and interfaces assigned to it. Regards -Nagendra _____ From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of DaMiEn667 Sent: Monday, November 05, 2007 11:39 PM To: [email protected] Subject: [Users] Issues Configuring on MontaVista CGE 4.0.1 So I have downloaded, compiled, and successfully installed the following on 2 separate machines: net-snmp-5.4.1 tipc-1.5.12 xerces-c_2_8_0-x86-linux-gcc_3_4 opensaf-1.0-3 I have also edited slot_id, rde_rde_config_file, and nodeinit.conf on these 2 said systems to reflect 1 being an Active Controller and the other as a Standby. For some reason, controller 1 comes up, and when I try to start controller 2, the RDE service just hangs and never starts. Here is the output from /var/opt/opensaf/stdouts/ncs_rde on controller 2. PID file : /var/run/rde.pid Shelf number : 2 Slot number : 2 Site number : 1 Log level : 5 Interactive mode : FALSE rde ncs_agents_startup success rde_fla_log_bind success RDE INITIALIZATION FAILED: % Here is output from /var/opt/opensaf/stdouts/ncs_rde on controller 1. PID file : /var/run/rde.pid Shelf number : 2 Slot number : 1 Site number : 1 Log level : 5 Interactive mode : FALSE rde ncs_agents_startup success rde_fla_log_bind success RDE INITIALIZATION SUCCESS ./rde_amf.c:310: RDE_COND_AMF_INIT_DONE ./rde_amf.c:346: RDE_COND_AMF_REG_DONE Healthcheck key: BAD8 ./rde_amf.c:546: RDE_COND_AMF_HEALTH_CHK_START_DONE ./rde_amf.c:168: rde_saf_health_chk_callback invoked safComp=CompT_SC_RDE,safSu=SuT_NCS_ND_CNTLR,safNode=SC_2_1 ./rde_amf.c:174: rde_saf_health_chk_callback response sent: amf_rc 1 ./rde_amf.c:175: Component Name: safComp=CompT_SC_RDE,safSu=SuT_NCS_ND_CNTLR,safNode=SC_2_1 ./rde_amf.c:125: rde_saf_CSI_set_callback invoked safComp=CompT_SC_RDE,safSu=SuT_NCS_ND_CNTLR,safNode=SC_2_1 ./rde_amf.c:131: rde_saf_CSI_set_callback response sent: amf_rc 1 ./rde_amf.c:132: Component Name: safComp=CompT_SC_RDE,safSu=SuT_NCS_ND_CNTLR,safNode=SC_2_1 ./rde_amf.c:168: rde_saf_health_chk_callback invoked safComp=CompT_SC_RDE,safSu=SuT_NCS_ND_CNTLR,safNode=SC_2_1 ./rde_amf.c:174: rde_saf_health_chk_callback response sent: amf_rc 1 ./rde_amf.c:175: Component Name: safComp=CompT_SC_RDE,safSu=SuT_NCS_ND_CNTLR,safNode=SC_2_1 ./rde_amf.c:168: rde_saf_health_chk_callback invoked safComp=CompT_SC_RDE,safSu=SuT_NCS_ND_CNTLR,safNode=SC_2_1 ./rde_amf.c:174: rde_saf_health_chk_callback response sent: amf_rc 1 ./rde_amf.c:175: Component Name: safComp=CompT_SC_RDE,safSu=SuT_NCS_ND_CNTLR,safNode=SC_2_1 If you need any more information that his to help me diagnose the problem, just let me know. Thanks in advance, Gad
_______________________________________________ Users mailing list [email protected] http://list.opensaf.org/maillist/listinfo/users
