I also hate sitting through a youtube video when a few lines of text would
have answered a question.
This is what works with a Baofeng UV82. I think the same works for other
models.
- Dale
The three buttons that must be held down:
PTT-A This is the upper button on the left side of the radio.
MON This is the lower button on the left side of the radio.
# This is the lower right button on the radio keypad.
1. Turn off the radio.
2. Press all three of these buttons.
3. Turn on the radio.
4. The radio should display the word “FACTORY” for 5 to 10 seconds.
If the display continues to display “factory” proceed to the next
step.
Usually, the word disappears momentarily. If you do not see this
displayed
turn off the radio and repeat.
5. Turn off the radio.
6. Turn on the radio and try to transmit on a frequency outside the
HAM band such as a GMRS frequency.
On Wed, Apr 17, 2024 at 1:58 PM K0LNY ?? via Users <
[email protected]> wrote:
> Really?
> Can't the steps just be written out?
> Glenn
>
_______________________________________________
Users mailing list
[email protected]
https://lists.chirpmyradio.com/postorius/lists/users.lists.chirpmyradio.com
To unsubscribe, send an email to [email protected]
To report this email as off-topic, please email
[email protected]
List archives:
https://lists.chirpmyradio.com/hyperkitty/list/[email protected]/
