Is this the correct one? -= Gary =-
On Tue, Jun 11, 2024 at 16:09 Dan Smith <[email protected]> wrote: > Gary, you emailed the "list owner" address and not the list itself ( > [email protected]). Please re-send to the proper destination > (or open a bug, which sounds more appropriate). > > --Dan > > > On Jun 11, 2024, at 12:42 PM, Gary <[email protected]> wrote: > > > > I have two ‘Fengs, a GT-5R and a BF-F9 V2+. I have programmed both > successfully several times, and decided to add another local repeater to > both lists. I have included a screen shot of the last attempt on the BF-F9. > I had just updated your software, and added the W3EPE repeater to the list > (which correctly shows every entry), saved and uploaded it to the radio. > > > > After disconnecting from Chirp, I attempted to access the repeater > (which is very close), and it failed. So I went into the radio menu, and > went to item #25 Offset. It was set to 000.000. Supposed to be -5.0Mhz. So > I manually set in on the keypad and exited. Tried the repeater again - no > joy. Checked the offset - 000.000. Decided to try the offset itself - > 444.375. No repeater, offset reset to 0. > > > > Checked several other freqs on the list - list says there is one, radio > shows 0. Uh-oh! Grabbed my GT-5R, and downloaded it to Chirp. Then > disconnected and tried several repeaters. All worked. Used the radio menu, > and the offsets were there. So I added the new repeater to that list and > uploaded the list to the radio. Now none of the repeaters work, and > manually checking the radio, all offsets have been reset to 0. They’re > correct on the Chirp list, but the radio (neither radio) doesn’t receive > the offset data, for some reason. AND - I can no longer manually set the > offset from the radio keyboard. As soon as I exit the menu the offset > returns to 0. Both radios are now like this. I reset the BF-F9 twice and > tried reprogramming it, with no success. > > > > Any idea what’s happening here? Chirp was working until the last update, > and now I can’t even manually set these offsets… > > > > TIA,<IMG_0067.jpg> > > > > -= Gary =- > > _______________________________________________ Users mailing list [email protected] https://lists.chirpmyradio.com/postorius/lists/users.lists.chirpmyradio.com To unsubscribe, send an email to [email protected] To report this email as off-topic, please email [email protected] List archives: https://lists.chirpmyradio.com/hyperkitty/list/[email protected]/
