You can set the receive CTCSS to the default 88.5. And, check your squelch settings, zero is no squelch, so try 1 or 2. Glenn ----- Original Message ----- From: "Dave via Users" <[email protected]> To: <[email protected]> Cc: "Dave" <[email protected]> Sent: Friday, January 10, 2025 4:44 PM Subject: [users] UV-5R receive issues using CHIRP
I downloaded the CHIRP software I received with the radio, I used updated software to program the radio, it transmits fine, the problem is that I am not receiving anyone, the color on the radio changes as there are people talking, I have a scanner that also confirms that people are talking, but no audio from the radio, with the exception of the National Weather Service that is programmed in. I have some ham radio, FRS, GMRS Freq's programmed in. Since the updated software puts all the information in for us when you enter the frequency, I am not sure what is going on, any solutions? _______________________________________________ Users mailing list [email protected] https://lists.chirpmyradio.com/postorius/lists/users.lists.chirpmyradio.com To unsubscribe, send an email to [email protected] To report this email as off-topic, please email [email protected] List archives: https://lists.chirpmyradio.com/hyperkitty/list/[email protected]/ _______________________________________________ Users mailing list [email protected] https://lists.chirpmyradio.com/postorius/lists/users.lists.chirpmyradio.com To unsubscribe, send an email to [email protected] To report this email as off-topic, please email [email protected] List archives: https://lists.chirpmyradio.com/hyperkitty/list/[email protected]/
