I have this system that I have been using that was running Fedora 21.  
I just updated it today (Monday) to Fedora 22.  It is an old Dell 
Optiplex GX620 with two 2TB disk drives set up with two partitions 
each in a RAID One configuration.  LVM2 runs on top of the second 
partition with several logical volumes.  This system had been running 
just fine before I did the upgrade.  After the upgrade, the system will 
not boot using one of the new Fedora 22 kernels.  It boots just fine 
using one of the old Fedora 21 kernels that did not get replaced during 
the upgrade.

I can get the system up using one of the new kernels, but I have to 
wait until it stops at a Dracut prompt.  I then manual run "mdadm --
assemble --scan" to get the RAID One partitions assembled, and "lvm 
vgchange -a y" to get the Volume Group built.  After that, I issue an 
"exit" and the system completes the boot process.  I need to figure out 
why this system will not boot without intervention.  Any suggestions 
would be appreciated.

I have tried to rebuild the initramfs with dracut, no joy doing that.

Here is some of the data:

# cat /etc/mdadm.conf
MAILADDR root
AUTO +imsm +1.x -all
ARRAY /dev/md0 metadata=0.90 UUID=c45384af:aa8fc7ca:7eebaeb8:f0ca1523
ARRAY /dev/md1 metadata=1.2 name=test3.localnet:md1 
UUID=524079c6:521ca76f:126164a9:3232e116

# cat /etc/fstab
UUID=5a1848ce-cff6-4c1f-a622-dc1fe5f06d55 /boot ext3 defaults 1 2
UUID=762b53d0-b5a0-41dc-b804-d339fa58b119 swap  swap defaults 0 0
/dev/mapper/vg0-lv1     /                       ext4 defaults 1 1
/dev/mapper/vg0-lv2     /usr/local              ext4 defaults 1 2
/dev/mapper/vg0-lv3     /var                    ext4 defaults 1 2
/dev/mapper/vg0-lv4     /tmp                    ext4 defaults 1 2
/dev/mapper/vg0-lv5     /opt                    ext4 defaults 1 2
/dev/mapper/vg0-lv6     /home                   ext4 defaults 1 2
/dev/mapper/vg0-lv7     /work                   ext4 defaults 1 2
/dev/sr0                /cd0    auto  noauto,owner,user,ro    0 0

# uname -a
Linux redwood 4.4.9-200.fc22.x86_64 #1 SMP Fri May 6 17:42:20 UTC 2016 
x86_64 x86_64 x86_64 GNU/Linux

Other versions of kernels that work just fine: 3.18.9-200 & 4.1.13-100
both from the Fedora 21 distribution.
--
users mailing list
users@lists.fedoraproject.org
To unsubscribe or change subscription options:
http://lists.fedoraproject.org/admin/lists/users@lists.fedoraproject.org
Fedora Code of Conduct: http://fedoraproject.org/code-of-conduct
Guidelines: http://fedoraproject.org/wiki/Mailing_list_guidelines
Have a question? Ask away: http://ask.fedoraproject.org

Reply via email to