On 03/14/2017 02:27 PM, Stephen Morris wrote: > On 3/15/17 3:25 AM, Tom Horsley wrote: >> On Tue, 14 Mar 2017 09:43:45 -0700 >> Rick Stevens wrote: >> >>> Like I said, it's damned difficult to come up with something. If you >>> have a better idea, then submit it to the various kernel groups. >> I do have a better idea: Go back to the way it was when you could >> use udev to permanently assign names to interfaces :-). >> >> As you have just shown it is impossible to get it "right" but >> before they "fixed" it, you could at least get it to remain >> consistent with the udev rules. >> >> Stop trying to solve impossible problems. > I have several questions around the naming convention. > > My usb wireless adapter is named wlp3s0u2, hence the naming convention > is saying the adapter is usb device 3. I do have 3 usb devices > connected. Two of the devices are usb 2 and the adapter is usb 3, hence > when the device enumeration is done to determine what exists, what > controls whether usb 2 devices are enumerated first , is it software or > the motherboard?
Remember, we're talking about network interfaces here and the naming conventions we've been discussing here ONLY affects network interfaces. > Assuming the naming convention is based on enumeration > which it may not be given that, I have 2 usb 3 slots on the front of my > machine and, if on the running system I unplug my wireless adapter and > plug it into the second slot, when the system recognizes the device > again the name changes to wlp3s0u1. Also I have 2 usb 2 slots on the > front of my machine, and if I do the same thing to my adapter and unplug > it from the usb 3 slot and plug it into the second usb 2 slot the name > changes to wlp0s19f2u3, hence what does the naming convention actually > represent? I'm not sure. It sounds like all the USB hubs in your machine interface through PCI slot 3. I would have expected that the various hubs would have different "s" numbers (e.g. one hub on p3s0, one on p3s1, etc.). > As I said above I have 3 usb devices, the other 2 are a keyboard and the > transmitter for my wireless mouse. How do I find what the naming > convention for those two devices is, in terms of what they are actually > named? They'd show up in the dmesg log, but they will NOT be named things like "wlp3". Again, that's just for wireless NICs. I have a Logitech wireless keyboard and mouse and this is how they appear in dmesg: [ 2.556799] logitech 0003:046D:C517.0001: input,hidraw1: USB HID v1.10 Keyboard [Logitech USB Receiver] on usb-0000:00:14.0-5/input0 [ 2.608866] logitech 0003:046D:C517.0002: input,hiddev0,hidraw2: USB HID v1.10 Mouse [Logitech USB Receiver] on usb-0000:00:14.0-5/input1 > Lastly, if I plug a flash driver into the usb 3 slot where my wireless > adapter was what name does it inherit and how do I find out? It would most likely be /dev/sdX, where "X" was the next sequential disk number available at the time you plugged the device in. > > regards, > Steve > >> _______________________________________________ >> users mailing list -- users@lists.fedoraproject.org >> To unsubscribe send an email to users-le...@lists.fedoraproject.org > _______________________________________________ > users mailing list -- users@lists.fedoraproject.org > To unsubscribe send an email to users-le...@lists.fedoraproject.org -- ---------------------------------------------------------------------- - Rick Stevens, Systems Engineer, AllDigital ri...@alldigital.com - - AIM/Skype: therps2 ICQ: 226437340 Yahoo: origrps2 - - - - We are born naked, wet and hungry. Then things get worse. - ---------------------------------------------------------------------- _______________________________________________ users mailing list -- users@lists.fedoraproject.org To unsubscribe send an email to users-le...@lists.fedoraproject.org
