It's been my experience that if you want udev to rename interfaces you have to
include in /etc/default/grub:
net.ifnames=0
on the kernel command line to prevent the auto rename that the kernel does:
GRUB_CMDLINE_LINUX="rd.md.uuid=bf821173:4de945af:1f58df6d:74e2fc11 net.ifnames=0
rd.shell rd.timeout=65"
Don't forget to re-create your grub config and then reboot:
grub2-mkconfig -o /boot/grub2/grub.cfg
My /etc/udev/rules.d/70-persistent-net.rules line looks like this:
SUBSYSTEM=="net", ACTION=="add", DRIVERS=="?*", ATTR{address}=="6c:f0:49:0a:1e:54", ATTR{dev_id}=="0x0", ATTR{type}=="1",
KERNEL=="eth*", NAME="lan4"
Bill
On 12/11/2018 9:10 PM, sean darcy wrote:
On 12/11/18 12:54 PM, Rick Stevens wrote:
On 12/11/18 8:52 AM, sean darcy wrote:
On 12/11/18 12:54 AM, Samuel Sieb wrote:
On 12/10/18 4:22 PM, sean darcy wrote:
I'm trying to get the interface on a multi-homed machine named
"internal"
ifconfig
enp1s0: flags=4099<UP,BROADCAST,MULTICAST> mtu 1500
ether 50:7b:9d:0b:8a:ab txqueuelen 1000 (Ethernet)
Is that the full ifconfig output for that interface or does it have
the right IP address as well?
I haven't connected the port yet. Before I do I need to make sure I've
got the correct internet name.
That's the device (ethernet port) name, NOT the host name. The host name
is controlled by the contents of the /etc/hostname file, which is read
at boot time and sets the FQDN (fully qualified domain name) of the
machine.
That was fat finger syndrome. I meant interface name !
The stuff in the /etc/sysconfig/network-scripts/ifcfg-* files (and NM's
configurations) control how the interfaces themselves are configured
and do not affect the hostname of the machine.
As I understand, NM scans the ifcfg files for HWADDR's. If there's a
match, it names the interface the DEVICE name.
I believe NM uses the DEVICE _or_ the HWADDR to set up the interface.
Whichever one matches the hardware config first is what gets used (I'm
not sure which has precedence). And don't be confused...the values in
the NM config are only used to match the hardware.
And in answer to your second message, NM doesn't do any renaming of
devices. That's still done by the udev rules.
If so, why doesn't the udev rule work ? But I think nm now does device renaming:
https://access.redhat.com/documentation/en-us/red_hat_enterprise_linux/7/html/networking_guide/sec-understanding_the_device_renaming_procedure
sean
_______________________________________________
users mailing list -- users@lists.fedoraproject.org
To unsubscribe send an email to users-le...@lists.fedoraproject.org
Fedora Code of Conduct: https://getfedora.org/code-of-conduct.html
List Guidelines: https://fedoraproject.org/wiki/Mailing_list_guidelines
List Archives:
https://lists.fedoraproject.org/archives/list/users@lists.fedoraproject.org
_______________________________________________
users mailing list -- users@lists.fedoraproject.org
To unsubscribe send an email to users-le...@lists.fedoraproject.org
Fedora Code of Conduct: https://getfedora.org/code-of-conduct.html
List Guidelines: https://fedoraproject.org/wiki/Mailing_list_guidelines
List Archives:
https://lists.fedoraproject.org/archives/list/users@lists.fedoraproject.org