On 21/2/19 9:48 pm, Ed Greshko wrote:
On 2/21/19 6:43 PM, Patrick O'Callaghan wrote:
On Thu, 2019-02-21 at 20:29 +1100, Stephen Morris wrote:
On 21/2/19 6:47 am, Samuel Sieb wrote:
On 2/20/19 1:02 AM, Stephen Morris wrote:
lspci provides the following output for the device:

00:0f.0 VGA compatible controller: VMware SVGA II Adapter
As Patrick pointed out, this is clearly not an NVidia device.  You can
find out which driver is actually handling it, by running "lspci -v".
There will be a line with "Kernel driver in use:".

"lspci -v" gives me the following output:


00:0f.0 VGA compatible controller: VMware SVGA II Adapter (prog-if 00
[VGA controller])
          Subsystem: VMware SVGA II Adapter
          Flags: bus master, medium devsel, latency 64, IRQ 16
          I/O ports at 1070 [size=16]
          Memory at e8000000 (32-bit, prefetchable) [size=128M]
          Memory at fe000000 (32-bit, non-prefetchable) [size=8M]
          [virtual] Expansion ROM at 000c0000 [disabled] [size=128K]
          Capabilities: <access denied>
          Kernel driver in use: vmwgfx
          Kernel modules: vmwgfx

This output is under Wayland. I have previously installed the nvidia
proprietary driver from Negativo17 via dkms, and from what I can see
from the Xorg log, Xorg is loading that driver and the corresponding glx
module just before the message that Xorg can't find any display devices
to use.

I also checked the xorg.conf file and it specifies to use the nvidia
driver, should I change it to the above driver or is the above driver
unique to Wayland?
The driver has nothing to do with Wayland as such. Clearly an Nvidia
driver isn't going to work with a non-Nvidia GPU, which is what your VM
has. If you're loading the Nvidia driver anyway, this may be the source
of the problem. Remove the Nvidia stuff and try again.

Kernel driver in use: vmwgfx

vmwgfx is VMWare guest GL driver

If it were nVidia it would read

Kernel driver in use: nvidia

I have tried removing the nvidia entries from the device group in xorg.conf, and, also specifying driver "vmware" instead of "nvidia", and in both cases Gnome and KDE can be started with Xorg. In both cases though they start with the wrong screen resolution relative to the resolution that the vmware player is using. Gnome under Wayland is capable of re-setting its resolution to match that of the vmware player when maximizing the player, but KDE is not capable of doing so under Wayland. I might have to play around with the resolution configuration parameters to try to get Xorg to set its resolution to match vmware's.


regards,

Steve


_______________________________________________
users mailing list -- users@lists.fedoraproject.org
To unsubscribe send an email to users-le...@lists.fedoraproject.org
Fedora Code of Conduct: https://getfedora.org/code-of-conduct.html
List Guidelines: https://fedoraproject.org/wiki/Mailing_list_guidelines
List Archives: 
https://lists.fedoraproject.org/archives/list/users@lists.fedoraproject.org

Reply via email to