Hi, > However, the RAID arrangement is proprietry and different to mdadm > and/or LVM. OTOH, I did once spent an hour on the phone with a very > helpful LSI engineer trying to rescue one here. > > So, using the LSI in JOB (just a bunch of discs) mode, yes?
No, I believe it's RAID5 - 8x240GB. I'm planning on replacing those disks with 4x1TB disks, which would work on the onboard controllers. I still can't decide whether to continue to use the LSI controller. Actually, if I did use the onboard, I could use mdadm, take the system down to perform the initial install, and sync the data from the LSI disks while the system is running, then shut it down briefly to do the final sync after the bulk of the data has transferred. > The LSI stuff is pretty good in my experience. Ran them in several IBM > boxes and also at home for years. I am inclined to believe it will perform better than mdadm. > >Using the LSI makes me nervous - there have been one or two times when > >I almost lost the array, but I'll probably keep using it. > > The important thing is to be able to monitor them. I've some scripts for > that - put them in a 5 minute cronjob. Or in your monitoring system eg > nagios. Then you will get timely emails if a problem occurs. That sounds awesome. Do you know where I can find those scripts? I forgot they used to be referred to as megaraid. > I wrote the cs.app.megacli Python module for this (see PyPI) and have > some small auxiliary scripts which wrap it. Can you forward it on? > >Another problem - just saw one of the 2TB disks I'm using for backup is > >failing: > > Are they a RAID? Or 2 independent drives and filesystems? They are RAID1, directly connected to the onboard SATA, not through USB. > >> Do you have the hardware to assemble the new raidset with the new > >> drives > >> and have both online at once (with two machines I suppose)? > >> > >> If so you can do the cp-then-rsync directly to the new drives without > >> the intermediate 2TB volume. Which means there's no time consuming copy > >> back. > > > >Because of the hardware RAID controller, I cannot. > > Alas. Still, if you've got on board SATA in addition to the LSI > controller you could: copy the 1.3TB to external USB drives, install the > new OS on the SATA bus, swap out the old raidset for the new raidset, > copy back from the USB drives. I have another system on the same network with like 7TB of data available. I'm thinking that I sync a copy of the user data to that system, and create a virtual machine on that system with the mail server config that somehow mounts the directory on the host system. Disable the production system and change the IP of the virtual machine to assume that of the mail server. Users will then access this temporary system while I rebuild the production system and transfer back the data. Once the initial bulk transfer has occurred, shut down services on the virtual machine and sync the remaining user data back to the production system. Does this sound feasible? _______________________________________________ users mailing list -- users@lists.fedoraproject.org To unsubscribe send an email to users-le...@lists.fedoraproject.org Fedora Code of Conduct: https://docs.fedoraproject.org/en-US/project/code-of-conduct/ List Guidelines: https://fedoraproject.org/wiki/Mailing_list_guidelines List Archives: https://lists.fedoraproject.org/archives/list/users@lists.fedoraproject.org
