[inline]
On 8/20/2011 3:42 AM, Craig White wrote:
>
> If it looks something like this on your SMTP server
> # netstat -an
> Active Internet connections (servers and established)
> Proto R-Q S-Q Local Address Foreign Address State
> tcp 0 0 0.0.0.0:25 0.0.0.0:* LISTEN
Verified this to be the case on sending and receiving machine.
>
>
> then indeed it is listening on all interfaces (0.0.0.0 port 25) for
> connections from all addresses any originating port (0.0.0.0:*) which is
> what we're after.
>
> If you get connection refused, there is probably only a few
> possibilities...
>
> 1 - /etc/hosts.deny - is there something in that file that would cause
> your system to reject connections?
Both hosts.deny and hosts.allow have no active lines (the default from
installation)
> 2 - your network hardware...
I am presuming you are referring to my Linksys WRT54GL router which
connects the two machines. I wouldn't know how to test to see if there
was a problem, I can attest to my trying to remove it from the equation
by disabling firewall and therefore not blocking/filtering anything. I
am not touching VPN since that shouldn't be involved (?) and have no
rules under access restrictions and no entries under applications/games
(and wouldn't expect to need such given that ssh/22 works)
> 3 - your network configurations
Everything is statically assigned 192.168.2.x addresses, the Verizon
modem is 192.168.1.1 but all my tests are local to the LAN between
192.168.2.10 and 192.168.2.11 through Linksys 192.168.2.3 (triple
checked for typos)
I would expect ssh to fail if I had any problems with my network
configurations but it is happily doing the right thing.
> Baby steps... start on the computer that is the SMTP server.
> telnet 127.0.0.1 25 # does it connect?
Yes, it says "trying", "connected", and then "220 chowder.localdomain
ESMTP Sendmail 8.14.4/8.14.4; <date>
Chowder is 192.168.2.11.
Get same results on chalupa (192.168.2.10)
> telnet 192.168.2.10 25 # or whatever address is listed for 'eth0' - does
> it connect?
This works. On both machines, I can do telnet 192.168.2.{10,11} ...
telnet to self through port 25 and telnet to the other machine through
port 25
> After you can connect to port 25 on both the lo and eth0 addresses, you
> can move to another machine and see if you can telnet to the same
> 192.168.2.x IP address used above. It should work or it's almost certain
> that the problem is caused by 1 of the 3 things I listed above.
>
> Craig
>
>
From what I can tell, all tests using telnet via port 25 work, all test
with mail do not work.
Onto Tim's email(s) ...
Thanks,
Paul
--
users mailing list
users@lists.fedoraproject.org
To unsubscribe or change subscription options:
https://admin.fedoraproject.org/mailman/listinfo/users
Guidelines: http://fedoraproject.org/wiki/Mailing_list_guidelines
