On Fri, Feb 17, 2012 at 07:48:08PM -0800, Paul Allen Newell wrote: > On 2/17/2012 7:18 PM, T.C. Hollingsworth wrote: > > > > > > Try installing the 'hplip' and 'hplip-gui' packages, then run the > > `hp-setup` utility. > > > > I recently set up an HP combination scanner/printer, and while CUPS > > picked up the printer the second I plugged it in, the scanner needed > > that to work. > > > > HTH. > > -T.C. > > > > T.C: > > I had a similar issue in which the printer was picked up by CUPS and I > can print without problem, but I am not able to scan. I do know that I > had an old scanner working without problem. > > I saw this email and went "worth a shot". Yum installed your suggestion, > ran hp-setup, and it can't see any printer. If I go under > admin->printer, it shows there and things are still working. > > Testing on my F14 before migrating to F16. Maybe its an EOL issue? > > I wanted to ask if I am missing anything obvious before I go down that > path (as it involves walking up and down stairs as the F16 is on one > floor and the printer on another). > > Its an HP 7510 connected wireless into my Linksys router as DHCP. My F14 > and XP box are static IPs connected into same router. Initial setup done > on XP and everything working there. Nothing worked on F14 until I > installed system-config-printer cups hpijs, and then printing worked > after a simple set-up. Scanning did not. > > If it makes any difference, the Linksys is wired into the Verizon router > which is the connect to outside world ... so all connectivity is under > my control and I don't have to muck with Verizon's hardware/software. > > Another reason to avoid doing F16 is that it is a static IP connected > into a different router which is attached to a WAP which is wireless > into the main router which the printer, XP, and FC14. Just one more > "extra thing" that I'd rather tackle once the simplier setup is working. > > When I run hp-setup, it doesn't see any printer/device no matter which > of the four options I pick > > Thanks in advance, > Paul
Have you run the command from the cli, and has it spit anything interesting back? Terry -- users mailing list users@lists.fedoraproject.org To unsubscribe or change subscription options: https://admin.fedoraproject.org/mailman/listinfo/users Guidelines: http://fedoraproject.org/wiki/Mailing_list_guidelines Have a question? Ask away: http://ask.fedoraproject.org
