Hello Dan, Thanks. I'd join the discord forum and post there.
Regards Get BlueMail for Android On 4 Apr 2019, 17:14, at 17:14, Dan Morphis <[email protected]> wrote: >On Wed, Apr 3, 2019 at 10:08 PM Ebenezer <[email protected]> >wrote: > >> Hello Dan, >> >> Thank you for your response. >> >> Also, thanks for the correction on refreshing WLANConnection >instances. >> >> "*Where aren't you seeing the values at? In the CPE GUI, or GenieACS >> gui?"* >> I do not see the values in the CPE GUI. *Only the SSID value on the >> "WLANCommection.2" instance is set on both the CPE GUI and the >GenieACS gui*. >> All other values are set on the GenieACS gui, but do not show up on >the CPE >> gui. >> >> >What does the device log say? Most CPEs unfortunately do not put all >error >messages in the syslog, and instead only go to the console. Open up >your >CPE and see if you have a 4 pin serial connection. If so, get a USB >serial >breakout cable ><https://www.ebay.com/itm/FT232RL-FTDI-USB-3-3V-5-5V-to-TTL-Serial-Adapter-Module-for-Arduino-Mini-Ports/222655931837> >and attach it. You will probably see a lot more diagnostic information >on >the serial console then you will in the syslog (device log). Common >serial >parameters are 115200,8,N,1. > > >*Additional info:** The CPE vendor supports setting values on the >> "WANPPPConnection.1" instance only. Using the script in question, the >> values on this instance are set on the GenieACS gui, **but the values >are >> not seen on the CPE GUI.* >> >> Try putting the bolded line in your provision script. This will cause >genie to refresh the parameter names/values for the PPP connection. > >declare("InternetGatewayDevice.WANDevice.1.WANConnectionDevice.1.WANPPPConnection.*", >null, {path: 1}); >log('Create WANPPPConnection objects if necessary'); >*declare("InternetGatewayDevice.WANDevice.1.WANConnectionDevice.1.WANPPPConnection.*.*", >{path: now, value: now});* > > >At any rate, I'd suggest you take this to the discord forum ><https://forum.genieacs.com/> as the mailing list is going to be shut >down shortly. > > >-dan > > >------------------------------------------------------------------------ > >_______________________________________________ >Users mailing list >[email protected] >http://lists.genieacs.com/mailman/listinfo/users
_______________________________________________ Users mailing list [email protected] http://lists.genieacs.com/mailman/listinfo/users
