Hi Stefan, On 06/10/2020 18:29, Stefan Kalkowski wrote: > Hi Pirmin, > > On Tue, Oct 06, 2020 at 06:13:36PM +0200, Pirmin Duss wrote: >> Hi Stefan, >> >> On 06/10/2020 16:18, Stefan Kalkowski wrote: >>> >>> sorry, for my misleading wrong sentence. I meant it has to be _not_ >>> below 0x40000000. And I was refering to the ARM Trusted Firmware >>> sources, I found are the right one for the i.MX 8MQ EVK. For your SoC, >>> I found the line[0] to be the relevant one for the ip checking. >>> >>> The question arises what version of the ATF are you using. Did you >>> compiled the bootloader chain yourself? >> >> Yes, I have compiled the bootloader according to >> https://github.com/compulab-yokneam/meta-bsp-imx8mm/blob/iot-gate-imx8_r2.0/Documentation/imx_boot_image_build.md >> >> ATF is in the version rel_imx_5.4.24_2.1.0 plus some patches by compulab. >> >> I will try It wit the version you have listed, and give feedback on how >> it went. > > I did not wanted to encourage you to use another version for the ATF, > but if you use other sources it would make more sense to look inside > those to find out why you gain the result -9. > So maybe you should use your compulab version for further > investigation.
It also ocured to me, that I juts could look, what address the ATF of compulab uses. I just did this, and now log run works (for the record the address is 0x40200000). Many thanks for your fast support. Best regards, Pirmin _______________________________________________ Genode users mailing list [email protected] https://lists.genode.org/listinfo/users
