On Thu, 25 Feb 2021 at 13:46, Michael Grunditz <[email protected]> wrote: > > On Thu, 25 Feb 2021 at 00:34, Michael Grunditz > <[email protected]> wrote: > > > > Hi, > > > > I am trying to boot a genode uImage (tftp,bootm) but gets ATAG not > > compiled in. Do I need to patch out that error from u-boot , or is > > there another workaround? > > A little follow up. I used bootelf -p address. That started the kernel > but end up in: > > Kernel: Unknown cpu exception EC=0 ISS=0 ip=0xffffffc000040cb > > It is stack management code. I modded my cmd/boot.c to allow booting aarch64 binaries and cloned down a new Genode source tree. Built run/log and started it with "go 0x40010000". It worked once.. I changed ram size and uart (to match my board) and try booting again. Nothing on serial. Then I tried to echo a char right in the starting point crt0.s, it worked I get that char on serial. OK .. I recloned a new source tree , but same results.
I can't get bootm to work even after removed the atag requirement. I would be very happy if someone can explain what happens. _______________________________________________ Genode users mailing list [email protected] https://lists.genode.org/listinfo/users
