Hi genodians, I tried to proceed with Sebastian's suggestions. When I fetched dde_rump from [ https://github.com/justincormack/netbsd-src ] while preparing port for riscv, I received an error message as patch could not be applied. Here is the error message:
dde_rump download https://github.com/justincormack/netbsd-src dde_rump git Cloning into 'src/lib/dde_rump'... Updating files: 100% (31930/31930), done./31930) dde_rump update src/lib/dde_rump dde_rump download https://github.com/justincormack/netbsd-src/trunk/src/sys/arch dde_rump download https://github.com/justincormack/netbsd-src/trunk/src/common/lib/libc/arch/riscv/atomic dde_rump apply patches/rump.patch 1 out of 1 hunk FAILED -- saving rejects to file src/lib/dde_rump/src/sys/sys/module.h.rej make[2]: *** [/genode/tool/ports/mk/install.mk:128: phony/patches/patches/rump.patch] Error 1 make[1]: *** [/genode/tool/ports/mk/prepare_single_port.mk:43: _install_in_port_dir] Error 2 make: *** [tool/ports/prepare_port:47: dde_rump] Error 2 I didn't know, if am supposed to modify the patch file or the file (module.h). So I decided to move on with the previous repo ( https://github.com/ssumpf/rump.git) and I manually added the missing header files in [ /genode/contrib/dde_rump-<hash>/src/lib/dde_rump/src/sys/sys ] that were required to build sculpt for virt riscv. The fatal error problem was gone but now while building sculpt I am getting the following error. COMPILE vnode_if.o COMPILE xlat_mbr_fstype.o make[7]: *** No rule to make target 'atomic_add_16.S', needed by 'atomic_add_16.o'. Stop. make[6]: *** [var/libdeps:184: rump.lib] Error 2 make[5]: *** [Makefile:336: gen_deps_and_build_targets] Error 2 make[4]: *** [/genode/tool/depot/mk/build_bin_archive:208: /genode/depot/genodelabs/bin/riscv/rump/2023-03-28-b.build/bin] Error 1 make[3]: *** [/genode/depot/var/build.mk:264: genodelabs/bin/riscv/rump/2023-03-28-b] Error 2 make[2]: *** [/genode/tool/depot/build:136: execute_generated_build_mk_file] Error 2 make[1]: *** [/genode/tool/depot/create:59: build] Error 2 make[1]: Leaving directory '/genode/build/riscv' child process exited abnormally I have found out that, there is no 'atomic_add_16.S' in ( https://github.com/justincormack/netbsd-src/trunk/src/common/lib/libc/arch/riscv/atomic ) but its there for aarch64 which is not working for me as I am working on riscv. These were the two problems I have faced, please give some comments on it and kindly suggest something through which I can proceed further. thanks & regards Pranab On Fri, Mar 17, 2023 at 1:22 PM Sebastian Sumpf < sebastian.su...@genode-labs.com> wrote: > On 3/15/23 15:23, Pranab Kumar Rout cs21m045 wrote: > > Hi all, > > As I see in [1], when we prepare port for dde_rump, it fetches from [2] > and not > > from [3]. And I found that the "src/sys/sys/common_ansi.h" is not > present in > > [2]. May be for this reason while building sculpt the error came up. > Also in [1] > > I can see that its fetching libc files from > > "/src/common/lib/libc/arch/aarch64/atomic" and not from > > "/src/common/lib/libc/arch/riscv/atomic". Is it okay or should I update > this in > > [1] ? > > Yes. > > Cheers, > > Sebastian > > > [1] repos/dde_rump/ports/dde_rump.port > > < > https://github.com/genodelabs/genode/blob/master/repos/dde_rump/ports/dde_rump.port > > > > [2] https://github.com/ssumpf/rump.git < > https://github.com/ssumpf/rump.git> > > [3] https://github.com/justincormack/netbsd-src > > <https://github.com/justincormack/netbsd-src> > > > > Were you suggesting to update this thing ? Please have a look and > suggest steps > > I need to take. > > I think this must be the reason for that fatal error. Kindly acknowledge. > > > > Regards, > > Pranab > > > > On Mon, Mar 13, 2023 at 4:07 PM Sebastian Sumpf < > sebastian.su...@genode-labs.com > > <mailto:sebastian.su...@genode-labs.com>> wrote: > > > > Hello Pranab, > > > > On 3/13/23 07:47, Pranab Kumar Rout cs21m045 wrote: > > > Hello genodians, > > > While building sculpt for virt_qemu_riscv, I found that dde_rump > port is not > > > prepared for RISCV. Taking help from the community, I used the > same > > approach as > > > for arm_v8a (aarch64) as found under > > "repos/dde_rump/lib/mk/spec/arm_64/*" just > > > for "spec/riscv" in order to enable rump support for RISC-V. > > > I am getting this error. If you find it familiar, kindly help me > > > checking library dependencies... > > > Library ldso_so_support > > > COMPILE so_support.o > > > MERGE ldso_so_support.lib.a > > > Library ld > > > CONVERT ld.symbols.s > > > ASSEMBLE ld.symbols.o > > > MERGE ld.abi.so <http://ld.abi.so> <http://ld.abi.so < > http://ld.abi.so>> > > > Library base > > > MERGE base.lib.a > > > Library block_session > > > MERGE block_session.lib.a > > > Library config > > > MERGE config.lib.a > > > Library file_system > > > MERGE file_system.lib.a > > > Library file_system_session > > > MERGE file_system_session.lib.a > > > Library os > > > MERGE os.lib.a > > > Library rump_include > > > MERGE rump_include.lib.a > > > Library rump > > > COMPILE __main.o > > > In file included from > > > > > > > /genode/depot/genodelabs/src/rump/2023-03-07-b/src/lib/dde_rump/src/sys/sys/types.h:47, > > > from > > > > > > > /genode/depot/genodelabs/src/rump/2023-03-07-b/src/lib/dde_rump/src/sys/lib/libkern/__main.c:33: > > > > > > > /genode/depot/genodelabs/bin/riscv/rump/2023-03-07-b.build/var/libcache/rump/include/machine/ansi.h:3:10: > fatal error: sys/common_ansi.h: No such file or directory > > > 3 | #include <sys/common_ansi.h> > > > | ^~~~~~~~~~~~~~~~~~~ > > > > When looking at > "contrib/dde_rump-<hash>/src/lib/dde_rump_aarch64_backport" I > > can see that only "src/sys/arch" [1] is checked out from [2] while > > "common_ansi.h" resides under "src/sys/sys/common_ansi.h" [3]. > Therefore, you > > could adjust [1] to also checkout "src/sys" or "src/sys/sys" and > update the > > "INC_DIR" and/or symlinks under "dde_rump/lib/mk/spec/riscv" > accordingly. > > > > [1] repos/dde_rump/ports/dde_rump.port > > [2] https://github.com/justincormack/netbsd-src > > <https://github.com/justincormack/netbsd-src> > > [3] > > > https://github.com/justincormack/netbsd-src/blob/master/src/sys/sys/common_ansi.h > < > https://github.com/justincormack/netbsd-src/blob/master/src/sys/sys/common_ansi.h > > > > > > *Note: When adjusting "dde_rump.port" you need to execute > > > > ! ./tool/ports/update_hash dde_rump > > > > in order to create a new hash for the port. > > > > Regards, > > > > Sebastian > > > > -- > > Sebastian Sumpf > > Genode Labs > > > > http://www.genode-labs.com <http://www.genode-labs.com> · > http://genode.org > > <http://genode.org> > > > > Genode Labs GmbH · Amtsgericht Dresden · HRB 28424 · Sitz Dresden > > Geschäftsführer: Dr.-Ing. Norman Feske, Christian Helmuth > > > > > > > > > > > > _______________________________________________ > > Genode users mailing list > > users@lists.genode.org <mailto:users@lists.genode.org> > > https://lists.genode.org/listinfo/users > > <https://lists.genode.org/listinfo/users> > > > > > > _______________________________________________ > > Genode users mailing list > > users@lists.genode.org > > https://lists.genode.org/listinfo/users > > -- > Sebastian Sumpf > Genode Labs > > http://www.genode-labs.com · http://genode.org > > Genode Labs GmbH · Amtsgericht Dresden · HRB 28424 · Sitz Dresden > Geschäftsführer: Dr.-Ing. Norman Feske, Christian Helmuth > > > > > > _______________________________________________ > Genode users mailing list > users@lists.genode.org > https://lists.genode.org/listinfo/users >
_______________________________________________ Genode users mailing list users@lists.genode.org https://lists.genode.org/listinfo/users