Hello Genodians
While testing my changed usb_net driver that supports SMSC95XX on
arm_v8a I discovered, that the link state isn't propagated to the
connected nic_router as it has been with the old version.
With the old driver the log output of nic_router was as follows when the
cable was connected/disconnected:
<connect cable>
[init -> nic_router] [secondary_nic] NIC sessions: 1
[init -> nic_router] [secondary_nic] dynamic IP config: interface
10.10.10.10/16, ...
<disconnect cable>
[init -> nic_router] [secondary_nic] dynamic IP config: none
[init -> nic_router] [secondary_nic] NIC sessions: 0
With the new driver nic_router always reports:
[init -> nic_router] [secondary_nic] NIC sessions: 1
As I do not have any other devices that need the usb_net driver,
I'm not sure, if this only happens for my driver or if this is
consistent with all other device types.
Could someone with an other usb_net driven device give me feedback, if
other devices show the same log outputs?
Regards, Pirmin
_______________________________________________
Genode users mailing list
[email protected]
https://lists.genode.org/listinfo/users
