Howdy,
I seem to recall something like that with similar hardware, a Nic working in
Sculpt, but not in my own run scenarios.
I ended up closing the ticket as fixed-with-workaround, after realizing this
one particular Nic card should not
be initialized too soon after boot up, but should be delayed by a few seconds
by using e.g. the "sequence"
Genode component and an ad-hoc "sleep" tiny component.
Who knows, you might be in a similar situation ?
The 'run' code is available on my chiselapp.com repo, here's an excerpt with
the jam scripting used, please adapt to gmake:
# Don't launch (nic_drv) immediately, as that won't work on e.g.
ThinkCentre M73, delay by 8 seconds (5 secs seems a little iffy):
AddComponentAsStart $(runfile) : 28M
: sequence : "name=\"sequence\" caps=\"320\"" :
" <config>
\ <start name=\"sleep\" caps=\"100\">
\ <config>
\ <libc
stdin=\"/dev/null\" stdout=\"/dev/log\" stderr=\"/dev/log\"/>
\ <arg
value=\"/bin/sleep\"/>
\ <arg value=\"8\"/>
\ <vfs>
\ <dir
name=\"dev\"> <log/> <null/> </dir>
\ </vfs>
\ </config>
\ </start>
\
\ <start name=\"nic_drv\" caps=\"219\" >
\ <binary name=\"pc_nic_drv\"/>
\ <config>
\ </config>
\ </start>
\ </config>
\ <route>
\ <any-service> <parent/> <any-child/>
</any-service>
\ </route>
Cédric
> De : hamed_khandagh--- via users <[email protected]>
> I am currently evaluating the ping_nic_router application, along with
> similar networking programs, for establishing network connectivity on x86_64
> hardware. My primary network interface card (NIC) is an R8169 model, which
> none of the existing programs are able to detect. However, upon integrating
> an Intel e1000 NIC, the connection was successfully established.
>
> Furthermore, the Sculpt operating system is able to interface correctly with
> both NICs and establish communication with the external network without any
> issues.
>
> Despite thorough comparison, I have been unable to identify any significant
> differences between the Sculpt operating system's networking functionality
> and the ping_nic_router application. I am uncertain whether I am overlooking
> a particular detail or if there is a requirement to modify the source code
> to accommodate the r8169 NIC.
_______________________________________________
users mailing list -- [email protected]
To unsubscribe send an email to [email protected]
Archived at
https://lists.genode.org/mailman3/hyperkitty/list/[email protected]/message/AWKICN3L337N4NZNT2O2LDIWM2ZEGJ2I/
