Hi Daofeng
Do you have an Infiniband card in the machine where you are
running the program?
(Open Fabrics / OFED is the software support for Infiniband.
I guess you need the same version installed in all machines.)
Does the directory referred in the error message actually
exist in your machine (i.e, /dev/infiniband) ?
Are you running it in the same machine where you installed OpenMPI?
What output do you get from:
/usr/sbin/ibstat
?
Did you compile the programs with the mpicc,mpiCC, mpif77
from the same OpenMPI that you built?
(Some Linux distributions and compilers come with
their own flavors of MPI, or you may also
have installed MPICH or MVAPICH, so it is not uncommon to mix up.)
Have you tried to suppress the use of Infinband, i.e.:
mpirun -mca btl ^openib -n 8 hello_cxx
(Well, "openib" is the OpenMPI support for Infiniband.
The "^" means "don't use it")
I hope this helps,
Gus Correa
Daofeng Li wrote:
Dear Jeff,
actually i didnot understand this....can you or anyone tell me what to do?
Thx.
Best.
On Fri, Dec 3, 2010 at 9:41 PM, Jeff Squyres (jsquyres)
<jsquy...@cisco.com <mailto:jsquy...@cisco.com>> wrote:
It means that you probably have a version mismatch with your
OpenFabrics drivers and or you have no OpenFabrics hardware and you
should probably disable those drivers.
Sent from my PDA. No type good.
On Dec 3, 2010, at 4:56 AM, "Daofeng Li" <lid...@gmail.com
<mailto:lid...@gmail.com>> wrote:
Dear list,
i am currently try to use the OpenMPI package
i install it at my home directory
./configure --prefix=$HOME --enable-mpi-threads
make
make install
and the i add the ~/bin to the path and ~/lib to the
ld_library_path to my .bashrc file
everything seems normal as i can run the example programs:
mpirun -n 8 hello_cxx
mpirun -n 8 hello_f77
mpirun -n 8 hello_c
etc...
but error messages appeas:
$ mpirun -n 8 hello_cxx
librdmacm: couldn't read ABI version.
librdmacm: assuming: 4
libibverbs: Fatal: couldn't read uverbs ABI version.
CMA: unable to open /dev/infiniband/rdma_cm
libibverbs: Fatal: couldn't read uverbs ABI version.
--------------------------------------------------------------------------
[[32727,1],1]: A high-performance Open MPI point-to-point
messaging module
was unable to find any relevant network interfaces:
Module: OpenFabrics (openib)
Host: localhost.localdomain
Another transport will be used instead, although this may result in
lower performance.
--------------------------------------------------------------------------
librdmacm: couldn't read ABI version.
librdmacm: assuming: 4
libibverbs: Fatal: couldn't read uverbs ABI version.
CMA: unable to open /dev/infiniband/rdma_cm
libibverbs: Fatal: couldn't read uverbs ABI version.
librdmacm: couldn't read ABI version.
librdmacm: assuming: 4
libibverbs: Fatal: couldn't read uverbs ABI version.
CMA: unable to open /dev/infiniband/rdma_cm
libibverbs: Fatal: couldn't read uverbs ABI version.
librdmacm: couldn't read ABI version.
librdmacm: assuming: 4
libibverbs: Fatal: couldn't read uverbs ABI version.
CMA: unable to open /dev/infiniband/rdma_cm
libibverbs: Fatal: couldn't read uverbs ABI version.
librdmacm: couldn't read ABI version.
librdmacm: assuming: 4
libibverbs: Fatal: couldn't read uverbs ABI version.
CMA: unable to open /dev/infiniband/rdma_cm
libibverbs: Fatal: couldn't read uverbs ABI version.
librdmacm: couldn't read ABI version.
librdmacm: assuming: 4
libibverbs: Fatal: couldn't read uverbs ABI version.
CMA: unable to open /dev/infiniband/rdma_cm
librdmacm: couldn't read ABI version.
librdmacm: assuming: 4
libibverbs: Fatal: couldn't read uverbs ABI version.
libibverbs: Fatal: couldn't read uverbs ABI version.
CMA: unable to open /dev/infiniband/rdma_cm
libibverbs: Fatal: couldn't read uverbs ABI version.
CMA: unable to open /dev/infiniband/rdma_cm
librdmacm: couldn't read ABI version.
librdmacm: assuming: 4
libibverbs: Fatal: couldn't read uverbs ABI version.
libibverbs: Fatal: couldn't read uverbs ABI version.
Hello, world! I am 1 of 8
Hello, world! I am 0 of 8
Hello, world! I am 3 of 8
Hello, world! I am 5 of 8
Hello, world! I am 7 of 8
Hello, world! I am 4 of 8
Hello, world! I am 6 of 8
Hello, world! I am 2 of 8
[localhost.localdomain:30503] 7 more processes have sent help
message help-mpi-btl-base.txt / btl:no-nics
[localhost.localdomain:30503] Set MCA parameter
"orte_base_help_aggregate" to 0 to see all help / error messages
i am wondering whether i install openmpi the right way
anyone would give some suggestions?
thanks in advance.
Best Regards.
--
Daofeng Li
College of Biological Science
China Agricultural University
Beijing
China
_______________________________________________
users mailing list
us...@open-mpi.org <mailto:us...@open-mpi.org>
http://www.open-mpi.org/mailman/listinfo.cgi/users
_______________________________________________
users mailing list
us...@open-mpi.org <mailto:us...@open-mpi.org>
http://www.open-mpi.org/mailman/listinfo.cgi/users
--
Daofeng Li
College of Biological Science
China Agricultural University
Beijing
China
------------------------------------------------------------------------
_______________________________________________
users mailing list
us...@open-mpi.org
http://www.open-mpi.org/mailman/listinfo.cgi/users
