On Thu, Jul 12, 2012 at 10:53:52AM -0400, Jonathan Dursi wrote:
> Hi:
>
> One of our users is reporting trouble reading large files with
> MPI_File_read (or read_all). With a few different type sizes, to
> keep count lower than 2^31, the problem persists. A simple C
> program to test this is attached; we see it in both OpenMPI 1.4.4
> and OpenMPI 1.6, with the only difference being the error code
> returned. We can read the amount of data required by looping over
> MPI_File_read()s, but in more complicated scenarios this gets
> awkward. I always thought that the 32-bit signed count limitation
> wasn't so bad because you could create larger data types to get
> around it, but this appears not to be the case here. Is this a
> known problem that we should just work around?
Hi. Known problem in the ROMIO MPI-IO implementation (which OpenMPI
uses). Been on my list of "things to fix" for a while.
==rob
> Output from ompi_info --all for the 1.4.4 build is also attached.
>
>
> OpenMPI 1.4.4
>
> Trying 268435457 of float, 1073741828 bytes: successfully read 268435457
> Trying 536870913 of float, 2147483652 bytes: failed: err=35, MPI_ERR_IO:
> input/output error
> Trying 134217729 of double, 1073741832 bytes: successfully read 134217729
> Trying 268435457 of double, 2147483656 bytes: failed: err=35, MPI_ERR_IO:
> input/output error
> Trying 67108865 of 2xdouble, 1073741840 bytes: successfully read 67108865
> Trying 134217729 of 2xdouble, 2147483664 bytes: failed: err=35, MPI_ERR_IO:
> input/output error
> Trying 524289 of 256xdouble, 1073743872 bytes: successfully read 524289
> Trying 1048577 of 256xdouble, 2147485696 bytes: failed: err=35, MPI_ERR_IO:
> input/output error
> Chunk 1/2: Trying 524288 of 256xdouble, chunked, 1073741824 bytes:
> successfully read 524288
> Chunk 2/2: Trying 524289 of 256xdouble, chunked, 1073743872 bytes:
> successfully read 524289
>
>
> OpenMPI 1.6
> Trying 268435457 of float, 1073741828 bytes: successfully read 268435457
> Trying 536870913 of float, 2147483652 bytes: failed: err=13, MPI_ERR_ARG:
> invalid argument of some other kind
> Trying 134217729 of double, 1073741832 bytes: successfully read 134217729
> Trying 268435457 of double, 2147483656 bytes: failed: err=13, MPI_ERR_ARG:
> invalid argument of some other kind
> Trying 67108865 of 2xdouble, 1073741840 bytes: successfully read 67108865
> Trying 134217729 of 2xdouble, 2147483664 bytes: failed: err=13, MPI_ERR_ARG:
> invalid argument of some other kind
> Trying 524289 of 256xdouble, 1073743872 bytes: successfully read 524289
> Trying 1048577 of 256xdouble, 2147485696 bytes: failed: err=13, MPI_ERR_ARG:
> invalid argument of some other kind
> Chunk 1/2: Trying 524288 of 256xdouble, chunked, 1073741824 bytes:
> successfully read 524288
> Chunk 2/2: Trying 524289 of 256xdouble, chunked, 1073743872 bytes:
> successfully read 524289
>
> - Jonathan
>
>
> #include <stdio.h>
> #include <stdlib.h>
> #include <mpi.h>
>
> int tryToRead(const MPI_File file, const MPI_Datatype type, const int count,
> const size_t size, const char *typename, void *buf) {
>
> int ierr;
> MPI_Status status;
>
> size_t bufsize = (size_t)count * size;
>
> printf("Trying %d of %s, %lu bytes: ", count, typename, bufsize );
>
> ierr = MPI_File_read(file, buf, count, type, &status);
>
> if ( !ierr ) {
>
> int gotcount;
> MPI_Get_count( &status, type, &gotcount );
> printf("successfully read %d\n", gotcount);
>
> } else {
>
> char err[MPI_MAX_ERROR_STRING];
> int len;
> MPI_Error_string(ierr, err, &len);
> printf("failed: err=%d, %s\n", ierr, err);
>
> }
>
> return ierr;
> }
>
>
> int tryToReadInChunks(const MPI_File file, const MPI_Datatype type, const int
> count,
> const size_t size, const char *typename, void *buf, int
> nchunks) {
>
> int ierr;
> int nsofar = 0;
> int chunksize = count / nchunks;
> char *cbuf = buf;
>
> for (int chunk = 0; chunk < nchunks; chunk++ ) {
> int thischunk = chunksize;
> if (chunk == nchunks-1) thischunk = count - nsofar;
>
> printf("Chunk %d/%d: ", chunk+1, nchunks);
> ierr = tryToRead(file, type, thischunk, size, typename,
> &(cbuf[nsofar*size]));
>
> if (ierr) break;
> nsofar += thischunk;
> }
>
> return ierr;
> }
>
>
> int main(int argc, char *argv[])
> {
> int count;
> MPI_File fh;
>
> MPI_Init(&argc, &argv);
>
> MPI_File_open(MPI_COMM_WORLD, "/dev/zero", MPI_MODE_RDONLY,
> MPI_INFO_NULL, &fh);
>
> char *buf = malloc( ((size_t)1 << 31)+1024 );
> if (buf == NULL) {
> printf("Malloc failed.\n");
> exit(-1);
> }
>
> /* integers */
>
> count = (1 << 28) + 1;
> tryToRead(fh, MPI_FLOAT, count, sizeof(float), "float", buf);
>
> count = (1 << 29) + 1;
> tryToRead(fh, MPI_FLOAT, count, sizeof(float), "float", buf);
>
> /* doubles */
>
> count = (1 << 27) + 1;
> tryToRead(fh, MPI_DOUBLE, count, sizeof(double), "double", buf);
>
> count = (1 << 28) + 1;
> tryToRead(fh, MPI_DOUBLE, count, sizeof(double), "double", buf);
>
> /* 2 x doubles */
>
> MPI_Datatype TwoDoubles;
> MPI_Type_contiguous(2, MPI_DOUBLE, &TwoDoubles);
> MPI_Type_commit(&TwoDoubles);
>
> count = (1 << 26) + 1;
> tryToRead(fh, TwoDoubles, count, 2*sizeof(double), "2xdouble", buf);
>
> count = (1 << 27) + 1;
> tryToRead(fh, TwoDoubles, count, 2*sizeof(double), "2xdouble", buf);
>
> MPI_Type_free(&TwoDoubles);
>
>
> /* 256 x doubles */
>
> MPI_Datatype TwoFiftySixDoubles;
> MPI_Type_contiguous(256, MPI_DOUBLE, &TwoFiftySixDoubles);
> MPI_Type_commit(&TwoFiftySixDoubles);
>
> count = (1 << 19) + 1;
> tryToRead(fh, TwoFiftySixDoubles, count, 256*sizeof(double),
> "256xdouble", buf);
>
> count = (1 << 20) + 1;
> tryToRead(fh, TwoFiftySixDoubles, count, 256*sizeof(double),
> "256xdouble", buf);
>
>
> /* 256 x doubles, in 2 chunks */
>
> count = (1 << 20) + 1;
> tryToReadInChunks(fh, TwoFiftySixDoubles, count, 256*sizeof(double),
> "256xdouble, chunked", buf, 2);
>
> MPI_Type_free(&TwoFiftySixDoubles);
>
> MPI_File_close(&fh);
> MPI_Finalize();
>
> free(buf);
> return 0;
> }
>
>
> Package: Open MPI root@gpc-f109n010 Distribution
> Open MPI: 1.4.4
> Open MPI SVN revision: r25188
> Open MPI release date: Sep 27, 2011
> Open RTE: 1.4.4
> Open RTE SVN revision: r25188
> Open RTE release date: Sep 27, 2011
> OPAL: 1.4.4
> OPAL SVN revision: r25188
> OPAL release date: Sep 27, 2011
> Ident string: 1.4.4
> MCA backtrace: execinfo (MCA v2.0, API v2.0, Component v1.4.4)
> MCA memory: ptmalloc2 (MCA v2.0, API v2.0, Component v1.4.4)
> MCA paffinity: linux (MCA v2.0, API v2.0, Component v1.4.4)
> MCA carto: auto_detect (MCA v2.0, API v2.0, Component v1.4.4)
> MCA carto: file (MCA v2.0, API v2.0, Component v1.4.4)
> MCA maffinity: first_use (MCA v2.0, API v2.0, Component v1.4.4)
> MCA timer: linux (MCA v2.0, API v2.0, Component v1.4.4)
> MCA installdirs: env (MCA v2.0, API v2.0, Component v1.4.4)
> MCA installdirs: config (MCA v2.0, API v2.0, Component v1.4.4)
> MCA dpm: orte (MCA v2.0, API v2.0, Component v1.4.4)
> MCA pubsub: orte (MCA v2.0, API v2.0, Component v1.4.4)
> MCA allocator: basic (MCA v2.0, API v2.0, Component v1.4.4)
> MCA allocator: bucket (MCA v2.0, API v2.0, Component v1.4.4)
> MCA coll: basic (MCA v2.0, API v2.0, Component v1.4.4)
> MCA coll: hierarch (MCA v2.0, API v2.0, Component v1.4.4)
> MCA coll: inter (MCA v2.0, API v2.0, Component v1.4.4)
> MCA coll: self (MCA v2.0, API v2.0, Component v1.4.4)
> MCA coll: sm (MCA v2.0, API v2.0, Component v1.4.4)
> MCA coll: sync (MCA v2.0, API v2.0, Component v1.4.4)
> MCA coll: tuned (MCA v2.0, API v2.0, Component v1.4.4)
> MCA io: romio (MCA v2.0, API v2.0, Component v1.4.4)
> MCA mpool: fake (MCA v2.0, API v2.0, Component v1.4.4)
> MCA mpool: rdma (MCA v2.0, API v2.0, Component v1.4.4)
> MCA mpool: sm (MCA v2.0, API v2.0, Component v1.4.4)
> MCA pml: cm (MCA v2.0, API v2.0, Component v1.4.4)
> MCA pml: csum (MCA v2.0, API v2.0, Component v1.4.4)
> MCA pml: ob1 (MCA v2.0, API v2.0, Component v1.4.4)
> MCA pml: v (MCA v2.0, API v2.0, Component v1.4.4)
> MCA bml: r2 (MCA v2.0, API v2.0, Component v1.4.4)
> MCA rcache: vma (MCA v2.0, API v2.0, Component v1.4.4)
> MCA btl: self (MCA v2.0, API v2.0, Component v1.4.4)
> MCA btl: sm (MCA v2.0, API v2.0, Component v1.4.4)
> MCA btl: ofud (MCA v2.0, API v2.0, Component v1.4.4)
> MCA btl: openib (MCA v2.0, API v2.0, Component v1.4.4)
> MCA btl: tcp (MCA v2.0, API v2.0, Component v1.4.4)
> MCA topo: unity (MCA v2.0, API v2.0, Component v1.4.4)
> MCA osc: pt2pt (MCA v2.0, API v2.0, Component v1.4.4)
> MCA osc: rdma (MCA v2.0, API v2.0, Component v1.4.4)
> MCA iof: hnp (MCA v2.0, API v2.0, Component v1.4.4)
> MCA iof: orted (MCA v2.0, API v2.0, Component v1.4.4)
> MCA iof: tool (MCA v2.0, API v2.0, Component v1.4.4)
> MCA oob: tcp (MCA v2.0, API v2.0, Component v1.4.4)
> MCA odls: default (MCA v2.0, API v2.0, Component v1.4.4)
> MCA ras: slurm (MCA v2.0, API v2.0, Component v1.4.4)
> MCA ras: tm (MCA v2.0, API v2.0, Component v1.4.4)
> MCA rmaps: load_balance (MCA v2.0, API v2.0, Component v1.4.4)
> MCA rmaps: rank_file (MCA v2.0, API v2.0, Component v1.4.4)
> MCA rmaps: round_robin (MCA v2.0, API v2.0, Component v1.4.4)
> MCA rmaps: seq (MCA v2.0, API v2.0, Component v1.4.4)
> MCA rml: oob (MCA v2.0, API v2.0, Component v1.4.4)
> MCA routed: binomial (MCA v2.0, API v2.0, Component v1.4.4)
> MCA routed: direct (MCA v2.0, API v2.0, Component v1.4.4)
> MCA routed: linear (MCA v2.0, API v2.0, Component v1.4.4)
> MCA plm: rsh (MCA v2.0, API v2.0, Component v1.4.4)
> MCA plm: slurm (MCA v2.0, API v2.0, Component v1.4.4)
> MCA plm: tm (MCA v2.0, API v2.0, Component v1.4.4)
> MCA filem: rsh (MCA v2.0, API v2.0, Component v1.4.4)
> MCA errmgr: default (MCA v2.0, API v2.0, Component v1.4.4)
> MCA ess: env (MCA v2.0, API v2.0, Component v1.4.4)
> MCA ess: hnp (MCA v2.0, API v2.0, Component v1.4.4)
> MCA ess: singleton (MCA v2.0, API v2.0, Component v1.4.4)
> MCA ess: slurm (MCA v2.0, API v2.0, Component v1.4.4)
> MCA ess: tool (MCA v2.0, API v2.0, Component v1.4.4)
> MCA grpcomm: bad (MCA v2.0, API v2.0, Component v1.4.4)
> MCA grpcomm: basic (MCA v2.0, API v2.0, Component v1.4.4)
> Prefix: /scinet/gpc/mpi/openmpi/1.4.4-gcc-v4.6.1
> Exec_prefix: /scinet/gpc/mpi/openmpi/1.4.4-gcc-v4.6.1
> Bindir: /scinet/gpc/mpi/openmpi/1.4.4-gcc-v4.6.1/bin
> Sbindir: /scinet/gpc/mpi/openmpi/1.4.4-gcc-v4.6.1/sbin
> Libdir: /scinet/gpc/mpi/openmpi/1.4.4-gcc-v4.6.1/lib
> Incdir: /scinet/gpc/mpi/openmpi/1.4.4-gcc-v4.6.1/include
> Mandir: /scinet/gpc/mpi/openmpi/1.4.4-gcc-v4.6.1/share/man
> Pkglibdir: /scinet/gpc/mpi/openmpi/1.4.4-gcc-v4.6.1/lib/openmpi
> Libexecdir: /scinet/gpc/mpi/openmpi/1.4.4-gcc-v4.6.1/libexec
> Datarootdir: /scinet/gpc/mpi/openmpi/1.4.4-gcc-v4.6.1/share
> Datadir: /scinet/gpc/mpi/openmpi/1.4.4-gcc-v4.6.1/share
> Sysconfdir: /scinet/gpc/mpi/openmpi/1.4.4-gcc-v4.6.1/etc
> Sharedstatedir: /scinet/gpc/mpi/openmpi/1.4.4-gcc-v4.6.1/com
> Localstatedir: /scinet/gpc/mpi/openmpi/1.4.4-gcc-v4.6.1/var
> Infodir: /scinet/gpc/mpi/openmpi/1.4.4-gcc-v4.6.1/share/info
> Pkgdatadir:
> /scinet/gpc/mpi/openmpi/1.4.4-gcc-v4.6.1/share/openmpi
> Pkglibdir: /scinet/gpc/mpi/openmpi/1.4.4-gcc-v4.6.1/lib/openmpi
> Pkgincludedir:
> /scinet/gpc/mpi/openmpi/1.4.4-gcc-v4.6.1/include/openmpi
> Configured architecture: x86_64-unknown-linux-gnu
> Configure host: gpc-f109n010
> Configured by: root
> Configured on: Fri Nov 25 14:12:53 EST 2011
> Configure host: gpc-f109n010
> Built by: root
> Built on: Fri Nov 25 14:23:02 EST 2011
> Built host: gpc-f109n010
> C bindings: yes
> C++ bindings: yes
> Fortran77 bindings: yes (all)
> Fortran90 bindings: yes
> Fortran90 bindings size: small
> C compiler: gcc
> C compiler absolute: /scinet/gpc/compilers/gcc-4.6.1/bin/gcc
> C char size: 1
> C bool size: 1
> C short size: 2
> C int size: 4
> C long size: 8
> C float size: 4
> C double size: 8
> C pointer size: 8
> C char align: 1
> C bool align: 1
> C int align: 4
> C float align: 4
> C double align: 8
> C++ compiler: g++
> C++ compiler absolute: /scinet/gpc/compilers/gcc-4.6.1/bin/g++
> Fortran77 compiler: gfortran
> Fortran77 compiler abs: /scinet/gpc/compilers/gcc-4.6.1/bin/gfortran
> Fortran90 compiler: gfortran
> Fortran90 compiler abs: /scinet/gpc/compilers/gcc-4.6.1/bin/gfortran
> Fort integer size: 4
> Fort logical size: 4
> Fort logical value true: 1
> Fort have integer1: yes
> Fort have integer2: yes
> Fort have integer4: yes
> Fort have integer8: yes
> Fort have integer16: no
> Fort have real4: yes
> Fort have real8: yes
> Fort have real16: no
> Fort have complex8: yes
> Fort have complex16: yes
> Fort have complex32: no
> Fort integer1 size: 1
> Fort integer2 size: 2
> Fort integer4 size: 4
> Fort integer8 size: 8
> Fort integer16 size: -1
> Fort real size: 4
> Fort real4 size: 4
> Fort real8 size: 8
> Fort real16 size: 16
> Fort dbl prec size: 4
> Fort cplx size: 4
> Fort dbl cplx size: 4
> Fort cplx8 size: 8
> Fort cplx16 size: 16
> Fort cplx32 size: 32
> Fort integer align: 4
> Fort integer1 align: 1
> Fort integer2 align: 2
> Fort integer4 align: 4
> Fort integer8 align: 8
> Fort integer16 align: -1
> Fort real align: 4
> Fort real4 align: 4
> Fort real8 align: 8
> Fort real16 align: 16
> Fort dbl prec align: 4
> Fort cplx align: 4
> Fort dbl cplx align: 4
> Fort cplx8 align: 4
> Fort cplx16 align: 8
> Fort cplx32 align: 16
> C profiling: yes
> C++ profiling: yes
> Fortran77 profiling: yes
> Fortran90 profiling: yes
> C++ exceptions: no
> Thread support: posix (mpi: yes, progress: no)
> Sparse Groups: no
> Build CFLAGS: -O3 -DNDEBUG -finline-functions
> -fno-strict-aliasing -pthread -fvisibility=hidden
> Build CXXFLAGS: -O3 -DNDEBUG -finline-functions -pthread
> Build FFLAGS:
> Build FCFLAGS:
> Build LDFLAGS: -export-dynamic
> Build LIBS: -lnsl -lutil -lm
> Wrapper extra CFLAGS: -pthread
> Wrapper extra CXXFLAGS: -pthread
> Wrapper extra FFLAGS: -pthread
> Wrapper extra FCFLAGS: -pthread
> Wrapper extra LDFLAGS: -L/opt/torque/lib -Wl,--rpath -Wl,/opt/torque/lib
>
> Wrapper extra LIBS: -lrdmacm -libverbs -ltorque -ldl
> -Wl,--export-dynamic -lnsl -lutil -lm -ldl
> Internal debug support: no
> MPI parameter check: runtime
> Memory profiling support: no
> Memory debugging support: no
> libltdl support: yes
> Heterogeneous support: no
> mpirun default --prefix: no
> MPI I/O support: yes
> MPI_WTIME support: gettimeofday
> Symbol visibility support: yes
> FT Checkpoint support: no (checkpoint thread: no)
> MCA mca: parameter "mca_param_files" (current value:
> "/home/s/scinet/ljdursi/.openmpi/mca-params.conf:/scinet/gpc/mpi/openmpi/1.4.4-gcc-v4.6.1/etc/openmpi-mca-params.conf",
> data source: default value)
> Path for MCA configuration files containing default
> parameter values
> MCA mca: parameter "mca_base_param_file_prefix" (current
> value: <none>, data source: default value)
> Aggregate MCA parameter file sets
> MCA mca: parameter "mca_base_param_file_path" (current
> value:
> "/scinet/gpc/mpi/openmpi/1.4.4-gcc-v4.6.1/share/openmpi/amca-param-sets:/scratch/s/scinet/ljdursi/Testing/mpi",
> data source: default value)
> Aggregate MCA parameter Search path
> MCA mca: parameter "mca_base_param_file_path_force" (current
> value: <none>, data source: default value)
> Forced Aggregate MCA parameter Search path
> MCA mca: parameter "mca_component_path" (current value:
> "/scinet/gpc/mpi/openmpi/1.4.4-gcc-v4.6.1/lib/openmpi:/home/s/scinet/ljdursi/.openmpi/components",
> data source: default value)
> Path where to look for Open MPI and ORTE components
> MCA mca: parameter "mca_verbose" (current value: <none>,
> data source: default value)
> Top-level verbosity parameter
> MCA mca: parameter "mca_component_show_load_errors" (current
> value: "1", data source: default value)
> Whether to show errors for components that failed
> to load or not
> MCA mca: parameter "mca_component_disable_dlopen" (current
> value: "0", data source: default value)
> Whether to attempt to disable opening dynamic
> components or not
> MCA mpi: parameter "mpi_paffinity_alone" (current value:
> "0", data source: default value, synonym of: opal_paffinity_alone)
> If nonzero, assume that this job is the only (set
> of) process(es) running on each node and bind processes to processors,
> starting with processor ID 0
> MCA mpi: parameter "mpi_param_check" (current value: "1",
> data source: default value)
> Whether you want MPI API parameters checked at
> run-time or not. Possible values are 0 (no checking) and 1 (perform checking
> at run-time)
> MCA mpi: parameter "mpi_yield_when_idle" (current value:
> "-1", data source: default value)
> Yield the processor when waiting for MPI
> communication (for MPI processes, will default to 1 when oversubscribing
> nodes)
> MCA mpi: parameter "mpi_event_tick_rate" (current value:
> "-1", data source: default value)
> How often to progress TCP communications (0 =
> never, otherwise specified in microseconds)
> MCA mpi: parameter "mpi_show_handle_leaks" (current value:
> "0", data source: default value)
> Whether MPI_FINALIZE shows all MPI handles that
> were not freed or not
> MCA mpi: parameter "mpi_no_free_handles" (current value:
> "0", data source: default value)
> Whether to actually free MPI objects when their
> handles are freed
> MCA mpi: parameter "mpi_show_mpi_alloc_mem_leaks" (current
> value: "0", data source: default value)
> If >0, MPI_FINALIZE will show up to this many
> instances of memory allocated by MPI_ALLOC_MEM that was not freed by
> MPI_FREE_MEM
> MCA mpi: parameter "mpi_show_mca_params" (current value:
> <none>, data source: default value)
> Whether to show all MCA parameter values during
> MPI_INIT or not (good for reproducability of MPI jobs for debug purposes).
> Accepted values are all, default, file, api, and enviro - or a comma
> delimited combination of them
> MCA mpi: parameter "mpi_show_mca_params_file" (current
> value: <none>, data source: default value)
> If mpi_show_mca_params is true, setting this string
> to a valid filename tells Open MPI to dump all the MCA parameter values into
> a file suitable for reading via the mca_param_files parameter (good for
> reproducability of MPI jobs)
> MCA mpi: parameter "mpi_keep_peer_hostnames" (current value:
> "1", data source: default value)
> If nonzero, save the string hostnames of all MPI
> peer processes (mostly for error / debugging output messages). This can add
> quite a bit of memory usage to each MPI process.
> MCA mpi: parameter "mpi_abort_delay" (current value: "0",
> data source: default value)
> If nonzero, print out an identifying message when
> MPI_ABORT is invoked (hostname, PID of the process that called MPI_ABORT) and
> delay for that many seconds before exiting (a negative delay value means to
> never abort). This allows attaching of a debugger before quitting the job.
> MCA mpi: parameter "mpi_abort_print_stack" (current value:
> "0", data source: default value)
> If nonzero, print out a stack trace when MPI_ABORT
> is invoked
> MCA mpi: parameter "mpi_preconnect_mpi" (current value: "0",
> data source: default value, synonyms: mpi_preconnect_all)
> Whether to force MPI processes to fully wire-up the
> MPI connections between MPI processes during MPI_INIT (vs. making connections
> lazily -- upon the first MPI traffic between each process peer pair)
> MCA mpi: parameter "mpi_preconnect_all" (current value: "0",
> data source: default value, deprecated, synonym of: mpi_preconnect_mpi)
> Whether to force MPI processes to fully wire-up the
> MPI connections between MPI processes during MPI_INIT (vs. making connections
> lazily -- upon the first MPI traffic between each process peer pair)
> MCA mpi: parameter "mpi_leave_pinned" (current value: "-1",
> data source: default value)
> Whether to use the "leave pinned" protocol or not.
> Enabling this setting can help bandwidth performance when repeatedly sending
> and receiving large messages with the same buffers over RDMA-based networks
> (0 = do not use "leave pinned" protocol, 1 = use "leave pinned" protocol, -1
> = allow network to choose at runtime).
> MCA mpi: parameter "mpi_leave_pinned_pipeline" (current
> value: "0", data source: default value)
> Whether to use the "leave pinned pipeline" protocol
> or not.
> MCA mpi: parameter "mpi_warn_on_fork" (current value: "1",
> data source: default value)
> If nonzero, issue a warning if program forks under
> conditions that could cause system errors
> MCA mpi: information "mpi_have_sparse_group_storage" (value:
> "0", data source: default value)
> Whether this Open MPI installation supports storing
> of data in MPI groups in "sparse" formats (good for extremely large process
> count MPI jobs that create many communicators/groups)
> MCA mpi: parameter "mpi_use_sparse_group_storage" (current
> value: "0", data source: default value)
> Whether to use "sparse" storage formats for MPI
> groups (only relevant if mpi_have_sparse_group_storage is 1)
> MCA orte: parameter "orte_base_help_aggregate" (current
> value: "1", data source: default value)
> If orte_base_help_aggregate is true, duplicate help
> messages will be aggregated rather than displayed individually. This can be
> helpful for parallel jobs that experience multiple identical failures; rather
> than print out the same help/failure message N times, display it once with a
> count of how many processes sent the same message.
> MCA orte: parameter "orte_tmpdir_base" (current value:
> <none>, data source: default value)
> Base of the session directory tree
> MCA orte: parameter "orte_no_session_dirs" (current value:
> <none>, data source: default value)
> Prohibited locations for session directories
> (multiple locations separated by ',', default=NULL)
> MCA orte: parameter "orte_debug" (current value: "0", data
> source: default value)
> Top-level ORTE debug switch (default verbosity: 1)
> MCA orte: parameter "orte_debug_verbose" (current value:
> "-1", data source: default value)
> Verbosity level for ORTE debug messages (default: 1)
> MCA orte: parameter "orte_debug_daemons" (current value: "0",
> data source: default value)
> Whether to debug the ORTE daemons or not
> MCA orte: parameter "orte_debug_daemons_file" (current value:
> "0", data source: default value)
> Whether want stdout/stderr of daemons to go to a
> file or not
> MCA orte: parameter "orte_leave_session_attached" (current
> value: "0", data source: default value)
> Whether applications and/or daemons should leave
> their sessions attached so that any output can be received - this allows X
> forwarding without all the attendant debugging output
> MCA orte: parameter "orte_do_not_launch" (current value: "0",
> data source: default value)
> Perform all necessary operations to prepare to
> launch the application, but do not actually launch it
> MCA orte: parameter "orte_daemon_spin" (current value: "0",
> data source: default value)
> Have any orteds spin until we can connect a
> debugger to them
> MCA orte: parameter "orte_daemon_fail" (current value: "-1",
> data source: default value)
> Have the specified orted fail after init for
> debugging purposes
> MCA orte: parameter "orte_daemon_fail_delay" (current value:
> "0", data source: default value)
> Have the specified orted fail after specified
> number of seconds (default: 0 => no delay)
> MCA orte: parameter "orte_heartbeat_rate" (current value:
> "0", data source: default value)
> Seconds between checks for daemon state-of-health
> (default: 0 => do not check)
> MCA orte: parameter "orte_startup_timeout" (current value:
> "0", data source: default value)
> Milliseconds/daemon to wait for startup before
> declaring failed_to_start (default: 0 => do not check)
> MCA orte: parameter "orte_timing" (current value: "0", data
> source: default value)
> Request that critical timing loops be measured
> MCA orte: parameter "orte_base_user_debugger" (current value:
> "totalview @mpirun@ -a @mpirun_args@ : ddt -n @np@ -start @executable@
> @executable_argv@ @single_app@ : fxp @mpirun@ -a @mpirun_args@", data source:
> default value)
> Sequence of user-level debuggers to search for in
> orterun
> MCA orte: parameter "orte_abort_timeout" (current value: "1",
> data source: default value)
> Max time to wait [in secs] before aborting an ORTE
> operation (default: 1sec)
> MCA orte: parameter "orte_timeout_step" (current value:
> "1000", data source: default value)
> Time to wait [in usecs/proc] before aborting an
> ORTE operation (default: 1000 usec/proc)
> MCA orte: parameter "orte_default_hostfile" (current value:
> <none>, data source: default value)
> Name of the default hostfile (relative or absolute
> path)
> MCA orte: parameter "orte_rankfile" (current value: <none>,
> data source: default value, synonyms: rmaps_rank_file_path)
> Name of the rankfile to be used for mapping
> processes (relative or absolute path)
> MCA orte: parameter "orte_keep_fqdn_hostnames" (current
> value: "0", data source: default value)
> Whether or not to keep FQDN hostnames [default: no]
> MCA orte: parameter "orte_contiguous_nodes" (current value:
> "2147483647", data source: default value)
> Number of nodes after which contiguous nodename
> encoding will automatically be used [default: INT_MAX]
> MCA orte: parameter "orte_tag_output" (current value: "0",
> data source: default value)
> Tag all output with [job,rank] (default: false)
> MCA orte: parameter "orte_xml_output" (current value: "0",
> data source: default value)
> Display all output in XML format (default: false)
> MCA orte: parameter "orte_xml_file" (current value: <none>,
> data source: default value)
> Provide all output in XML format to the specified
> file
> MCA orte: parameter "orte_timestamp_output" (current value:
> "0", data source: default value)
> Timestamp all application process output (default:
> false)
> MCA orte: parameter "orte_output_filename" (current value:
> <none>, data source: default value)
> Redirect output from application processes into
> filename.rank [default: NULL]
> MCA orte: parameter "orte_show_resolved_nodenames" (current
> value: "0", data source: default value)
> Display any node names that are resolved to a
> different name (default: false)
> MCA orte: parameter "orte_hetero_apps" (current value: "0",
> data source: default value)
> Indicates that multiple app_contexts are being
> provided that are a mix of 32/64 bit binaries (default: false)
> MCA orte: parameter "orte_launch_agent" (current value:
> "orted", data source: default value)
> Command used to start processes on remote nodes
> (default: orted)
> MCA orte: parameter "orte_allocation_required" (current
> value: "0", data source: default value)
> Whether or not an allocation by a resource manager
> is required [default: no]
> MCA orte: parameter "orte_xterm" (current value: <none>, data
> source: default value)
> Create a new xterm window and display output from
> the specified ranks there [default: none]
> MCA orte: parameter "orte_forward_job_control" (current
> value: "0", data source: default value)
> Forward SIGTSTP (after converting to SIGSTOP) and
> SIGCONT signals to the application procs [default: no]
> MCA orte: parameter "orte_report_launch_progress" (current
> value: "0", data source: default value)
> Output a brief periodic report on launch progress
> [default: no]
> MCA orte: parameter "orte_num_boards" (current value: "1",
> data source: default value)
> Number of processor boards/node (1-256) [default: 1]
> MCA orte: parameter "orte_num_sockets" (current value: "0",
> data source: default value)
> Number of sockets/board (1-256)
> MCA orte: parameter "orte_num_cores" (current value: "0",
> data source: default value)
> Number of cores/socket (1-256)
> MCA orte: parameter "orte_cpu_set" (current value: <none>,
> data source: default value)
> Comma-separated list of ranges specifying logical
> cpus allocated to this job [default: none]
> MCA orte: parameter "orte_process_binding" (current value:
> <none>, data source: default value)
> Policy for binding processes [none | core | socket
> | board] (supported qualifier: if-avail)
> MCA opal: parameter "opal_net_private_ipv4" (current value:
> "10.0.0.0/8;172.16.0.0/12;192.168.0.0/16;169.254.0.0/16", data source:
> default value)
> Semicolon-delimited list of CIDR notation entries
> specifying what networks are considered "private" (default value based on
> RFC1918 and RFC3330)
> MCA opal: parameter "opal_signal" (current value: "6,7,8,11",
> data source: default value)
> Comma-delimited list of integer signal numbers to
> Open MPI to attempt to intercept. Upon receipt of the intercepted signal,
> Open MPI will display a stack trace and abort. Open MPI will *not* replace
> signals if handlers are already installed by the time MPI_INIT is invoked.
> Optionally append ":complain" to any signal number in the comma-delimited
> list to make Open MPI complain if it detects another signal handler (and
> therefore does not insert its own).
> MCA opal: parameter "opal_paffinity_alone" (current value:
> "0", data source: default value, synonyms: mpi_paffinity_alone)
> If nonzero, assume that this job is the only (set
> of) process(es) running on each node and bind processes to processors,
> starting with processor ID 0
> MCA opal: parameter "opal_set_max_sys_limits" (current value:
> "0", data source: default value)
> Set to non-zero to automatically set any
> system-imposed limits to the maximum allowed
> MCA opal: parameter "opal_event_include" (current value:
> "poll", data source: default value)
> Comma-delimited list of libevent subsystems to use
> (poll, select -- available on your platform)
> MCA backtrace: parameter "backtrace" (current value: <none>, data
> source: default value)
> Default selection set of components for the
> backtrace framework (<none> means use all components that can be found)
> MCA backtrace: parameter "backtrace_base_verbose" (current value:
> "0", data source: default value)
> Verbosity level for the backtrace framework (0 = no
> verbosity)
> MCA backtrace: parameter "backtrace_execinfo_priority" (current
> value: "0", data source: default value)
> MCA memchecker: parameter "memchecker" (current value: <none>, data
> source: default value)
> Default selection set of components for the
> memchecker framework (<none> means use all components that can be found)
> MCA memory: parameter "memory" (current value: <none>, data
> source: default value)
> Default selection set of components for the memory
> framework (<none> means use all components that can be found)
> MCA memory: parameter "memory_base_verbose" (current value:
> "0", data source: default value)
> Verbosity level for the memory framework (0 = no
> verbosity)
> MCA memory: parameter "memory_ptmalloc2_priority" (current
> value: "0", data source: default value)
> MCA paffinity: parameter "paffinity_base_verbose" (current value:
> "0", data source: default value)
> Verbosity level of the paffinity framework
> MCA paffinity: parameter "paffinity" (current value: <none>, data
> source: default value)
> Default selection set of components for the
> paffinity framework (<none> means use all components that can be found)
> MCA paffinity: parameter "paffinity_linux_priority" (current
> value: "10", data source: default value)
> Priority of the linux paffinity component
> MCA paffinity: information "paffinity_linux_plpa_version" (value:
> "1.3.2", data source: default value)
> Version of PLPA that is embedded in Open MPI
> MCA carto: parameter "carto_base_verbose" (current value: "0",
> data source: default value)
> Verbosity level of the carto framework
> MCA carto: parameter "carto" (current value: <none>, data
> source: default value)
> Default selection set of components for the carto
> framework (<none> means use all components that can be found)
> MCA carto: parameter "carto_auto_detect_priority" (current
> value: "11", data source: default value)
> Priority of the auto_detect carto component
> MCA carto: parameter "carto_file_path" (current value: <none>,
> data source: default value)
> The path to the cartography file
> MCA carto: parameter "carto_file_priority" (current value:
> "10", data source: default value)
> Priority of the file carto component
> MCA maffinity: parameter "maffinity_base_verbose" (current value:
> "0", data source: default value)
> Verbosity level of the maffinity framework
> MCA maffinity: parameter "maffinity" (current value: <none>, data
> source: default value)
> Default selection set of components for the
> maffinity framework (<none> means use all components that can be found)
> MCA maffinity: parameter "maffinity_first_use_priority" (current
> value: "10", data source: default value)
> Priority of the first_use maffinity component
> MCA timer: parameter "timer" (current value: <none>, data
> source: default value)
> Default selection set of components for the timer
> framework (<none> means use all components that can be found)
> MCA timer: parameter "timer_base_verbose" (current value: "0",
> data source: default value)
> Verbosity level for the timer framework (0 = no
> verbosity)
> MCA timer: parameter "timer_linux_priority" (current value:
> "0", data source: default value)
> MCA dpm: parameter "dpm" (current value: <none>, data
> source: default value)
> Default selection set of components for the dpm
> framework (<none> means use all components that can be found)
> MCA dpm: parameter "dpm_base_verbose" (current value: "0",
> data source: default value)
> Verbosity level for the dpm framework (0 = no
> verbosity)
> MCA pubsub: parameter "pubsub" (current value: <none>, data
> source: default value)
> Default selection set of components for the pubsub
> framework (<none> means use all components that can be found)
> MCA pubsub: parameter "pubsub_base_verbose" (current value:
> "0", data source: default value)
> Verbosity level for the pubsub framework (0 = no
> verbosity)
> MCA pubsub: parameter "pubsub_orte_priority" (current value:
> "0", data source: default value)
> MCA allocator: parameter "allocator" (current value: <none>, data
> source: default value)
> Default selection set of components for the
> allocator framework (<none> means use all components that can be found)
> MCA allocator: parameter "allocator_base_verbose" (current value:
> "0", data source: default value)
> Verbosity level for the allocator framework (0 = no
> verbosity)
> MCA allocator: parameter "allocator_basic_priority" (current
> value: "0", data source: default value)
> MCA allocator: parameter "allocator_bucket_num_buckets" (current
> value: "30", data source: default value)
> MCA allocator: parameter "allocator_bucket_priority" (current
> value: "0", data source: default value)
> MCA coll: parameter "coll" (current value: <none>, data
> source: default value)
> Default selection set of components for the coll
> framework (<none> means use all components that can be found)
> MCA coll: parameter "coll_base_verbose" (current value: "0",
> data source: default value)
> Verbosity level for the coll framework (0 = no
> verbosity)
> MCA coll: parameter "coll_basic_priority" (current value:
> "10", data source: default value)
> Priority of the basic coll component
> MCA coll: parameter "coll_basic_crossover" (current value:
> "4", data source: default value)
> Minimum number of processes in a communicator
> before using the logarithmic algorithms
> MCA coll: parameter "coll_hierarch_priority" (current value:
> "0", data source: default value)
> Priority of the hierarchical coll component
> MCA coll: parameter "coll_hierarch_verbose" (current value:
> "0", data source: default value)
> Turn verbose message of the hierarchical coll
> component on/off
> MCA coll: parameter "coll_hierarch_use_rdma" (current value:
> "0", data source: default value)
> Switch from the send btl list used to detect
> hierarchies to the rdma btl list
> MCA coll: parameter "coll_hierarch_ignore_sm" (current value:
> "0", data source: default value)
> Ignore sm protocol when detecting hierarchies.
> Required to enable the usage of protocol specific collective operations
> MCA coll: parameter "coll_hierarch_detection_alg" (current
> value: "2", data source: default value)
> Used to specify the algorithm for detecting
> Hierarchy.To specify all levels or two levels of hierarchy
> MCA coll: parameter "coll_inter_priority" (current value:
> "40", data source: default value)
> Priority of the inter coll component
> MCA coll: parameter "coll_inter_verbose" (current value: "0",
> data source: default value)
> Turn verbose message of the inter coll component
> on/off
> MCA coll: parameter "coll_self_priority" (current value:
> "75", data source: default value)
> MCA coll: parameter "coll_sm_priority" (current value: "0",
> data source: default value)
> Priority of the sm coll component
> MCA coll: parameter "coll_sm_control_size" (current value:
> "4096", data source: default value)
> Length of the control data -- should usually be
> either the length of a cache line on most SMPs, or the size of a page on
> machines that support direct memory affinity page placement (in bytes)
> MCA coll: parameter "coll_sm_fragment_size" (current value:
> "8192", data source: default value)
> Fragment size (in bytes) used for passing data
> through shared memory (will be rounded up to the nearest control_size size)
> MCA coll: parameter "coll_sm_comm_in_use_flags" (current
> value: "2", data source: default value)
> Number of "in use" flags, used to mark a message
> passing area segment as currently being used or not (must be >= 2 and <=
> comm_num_segments)
> MCA coll: parameter "coll_sm_comm_num_segments" (current
> value: "128", data source: default value)
> Number of segments in each communicator's shared
> memory message passing area (must be >= 2, and must be a multiple of
> comm_in_use_flags)
> MCA coll: parameter "coll_sm_tree_degree" (current value:
> "4", data source: default value)
> Degree of the tree for tree-based operations (must
> be => 1 and <= min(control_size, 255))
> MCA coll: parameter "coll_sm_info_num_procs" (current value:
> "4", data source: default value)
> Number of processes to use for the calculation of
> the shared_mem_size MCA information parameter (must be => 2)
> MCA coll: information "coll_sm_shared_mem_used_data" (value:
> "8413184", data source: default value)
> Amount of shared memory used, per communicator, in
> the shared memory data area for info_num_procs processes (in bytes)
> MCA coll: parameter "coll_sync_priority" (current value:
> "50", data source: default value)
> Priority of the sync coll component; only relevant
> if barrier_before or barrier_after is > 0
> MCA coll: parameter "coll_sync_barrier_before" (current
> value: "1000", data source: default value)
> Do a synchronization before each Nth collective
> MCA coll: parameter "coll_sync_barrier_after" (current value:
> "0", data source: default value)
> Do a synchronization after each Nth collective
> MCA coll: parameter "coll_tuned_priority" (current value:
> "30", data source: default value)
> Priority of the tuned coll component
> MCA coll: parameter
> "coll_tuned_pre_allocate_memory_comm_size_limit" (current value: "32768",
> data source: default value)
> Size of communicator were we stop pre-allocating
> memory for the fixed internal buffer used for message requests etc that is
> hung off the communicator data segment. I.e. if you have a 100'000 nodes you
> might not want to pre-allocate 200'000 request handle slots per communicator
> instance!
> MCA coll: parameter "coll_tuned_init_tree_fanout" (current
> value: "4", data source: default value)
> Inital fanout used in the tree topologies for each
> communicator. This is only an initial guess, if a tuned collective needs a
> different fanout for an operation, it build it dynamically. This parameter is
> only for the first guess and might save a little time
> MCA coll: parameter "coll_tuned_init_chain_fanout" (current
> value: "4", data source: default value)
> Inital fanout used in the chain (fanout followed by
> pipeline) topologies for each communicator. This is only an initial guess, if
> a tuned collective needs a different fanout for an operation, it build it
> dynamically. This parameter is only for the first guess and might save a
> little time
> MCA coll: parameter "coll_tuned_use_dynamic_rules" (current
> value: "0", data source: default value)
> Switch used to decide if we use static (compiled/if
> statements) or dynamic (built at runtime) decision function rules
> MCA io: parameter "io_base_freelist_initial_size" (current
> value: "16", data source: default value)
> Initial MPI-2 IO request freelist size
> MCA io: parameter "io_base_freelist_max_size" (current
> value: "64", data source: default value)
> Max size of the MPI-2 IO request freelist
> MCA io: parameter "io_base_freelist_increment" (current
> value: "16", data source: default value)
> Increment size of the MPI-2 IO request freelist
> MCA io: parameter "io" (current value: <none>, data source:
> default value)
> Default selection set of components for the io
> framework (<none> means use all components that can be found)
> MCA io: parameter "io_base_verbose" (current value: "0",
> data source: default value)
> Verbosity level for the io framework (0 = no
> verbosity)
> MCA io: parameter "io_romio_priority" (current value: "10",
> data source: default value)
> Priority of the io romio component
> MCA io: parameter "io_romio_delete_priority" (current
> value: "10", data source: default value)
> Delete priority of the io romio component
> MCA io: information "io_romio_version" (value: "from MPICH2
> v1.0.7 with additional compilation/bug patches from [email protected]",
> data source: default value)
> Version of ROMIO
> MCA io: information "io_romio_user_configure_params"
> (value: <none>, data source: default value)
> User-specified command line parameters passed to
> ROMIO's configure script
> MCA io: information "io_romio_complete_configure_params"
> (value: " CFLAGS='-O3 -DNDEBUG -finline-functions -fno-strict-aliasing
> -pthread' CPPFLAGS=' ' FFLAGS='' LDFLAGS=' ' --enable-shared --enable-static
> --prefix=/scinet/gpc/mpi/openmpi/1.4.4-gcc-v4.6.1 --with-mpi=open_mpi
> --disable-aio", data source: default value)
> Complete set of command line parameters passed to
> ROMIO's configure script
> MCA mpool: parameter "mpool" (current value: <none>, data
> source: default value)
> Default selection set of components for the mpool
> framework (<none> means use all components that can be found)
> MCA mpool: parameter "mpool_base_verbose" (current value: "0",
> data source: default value)
> Verbosity level for the mpool framework (0 = no
> verbosity)
> MCA mpool: parameter "mpool_fake_priority" (current value:
> "0", data source: default value)
> MCA mpool: parameter "mpool_rdma_rcache_name" (current value:
> "vma", data source: default value)
> The name of the registration cache the mpool should
> use
> MCA mpool: parameter "mpool_rdma_rcache_size_limit" (current
> value: "0", data source: default value)
> the maximum size of registration cache in bytes. 0
> is unlimited (default 0)
> MCA mpool: parameter "mpool_rdma_print_stats" (current value:
> "0", data source: default value)
> print pool usage statistics at the end of the run
> MCA mpool: parameter "mpool_rdma_priority" (current value:
> "0", data source: default value)
> MCA mpool: parameter "mpool_sm_allocator" (current value:
> "bucket", data source: default value)
> Name of allocator component to use with sm mpool
> MCA mpool: parameter "mpool_sm_min_size" (current value:
> "67108864", data source: default value)
> Minimum size of the sm mpool shared memory file
> MCA mpool: parameter "mpool_sm_verbose" (current value: "0",
> data source: default value)
> Enable verbose output for mpool sm component
> MCA mpool: parameter "mpool_sm_priority" (current value: "0",
> data source: default value)
> MCA pml: parameter "pml_base_verbose" (current value: "0",
> data source: default value)
> Verbosity level of the PML framework
> MCA pml: parameter "pml" (current value: <none>, data
> source: default value)
> Default selection set of components for the pml
> framework (<none> means use all components that can be found)
> MCA pml: parameter "pml_cm_free_list_num" (current value:
> "4", data source: default value)
> Initial size of request free lists
> MCA pml: parameter "pml_cm_free_list_max" (current value:
> "-1", data source: default value)
> Maximum size of request free lists
> MCA pml: parameter "pml_cm_free_list_inc" (current value:
> "64", data source: default value)
> Number of elements to add when growing request free
> lists
> MCA pml: parameter "pml_cm_priority" (current value: "30",
> data source: default value)
> CM PML selection priority
> MCA pml: parameter "pml_csum_free_list_num" (current value:
> "4", data source: default value)
> MCA pml: parameter "pml_csum_free_list_max" (current value:
> "-1", data source: default value)
> MCA pml: parameter "pml_csum_free_list_inc" (current value:
> "64", data source: default value)
> MCA pml: parameter "pml_csum_send_pipeline_depth" (current
> value: "3", data source: default value)
> MCA pml: parameter "pml_csum_recv_pipeline_depth" (current
> value: "4", data source: default value)
> MCA pml: parameter "pml_csum_rdma_put_retries_limit"
> (current value: "5", data source: default value)
> MCA pml: parameter "pml_csum_max_rdma_per_request" (current
> value: "4", data source: default value)
> MCA pml: parameter "pml_csum_max_send_per_range" (current
> value: "4", data source: default value)
> MCA pml: parameter "pml_csum_unexpected_limit" (current
> value: "128", data source: default value)
> MCA pml: parameter "pml_csum_allocator" (current value:
> "bucket", data source: default value)
> Name of allocator component for unexpected messages
> MCA pml: parameter "pml_csum_priority" (current value: "0",
> data source: default value)
> MCA pml: parameter "pml_ob1_free_list_num" (current value:
> "4", data source: default value)
> MCA pml: parameter "pml_ob1_free_list_max" (current value:
> "-1", data source: default value)
> MCA pml: parameter "pml_ob1_free_list_inc" (current value:
> "64", data source: default value)
> MCA pml: parameter "pml_ob1_priority" (current value: "20",
> data source: default value)
> MCA pml: parameter "pml_ob1_send_pipeline_depth" (current
> value: "3", data source: default value)
> MCA pml: parameter "pml_ob1_recv_pipeline_depth" (current
> value: "4", data source: default value)
> MCA pml: parameter "pml_ob1_rdma_put_retries_limit" (current
> value: "5", data source: default value)
> MCA pml: parameter "pml_ob1_max_rdma_per_request" (current
> value: "4", data source: default value)
> MCA pml: parameter "pml_ob1_max_send_per_range" (current
> value: "4", data source: default value)
> MCA pml: parameter "pml_ob1_unexpected_limit" (current
> value: "128", data source: default value)
> MCA pml: parameter "pml_ob1_allocator" (current value:
> "bucket", data source: default value)
> Name of allocator component for unexpected messages
> MCA pml: parameter "pml_v_priority" (current value: "-1",
> data source: default value)
> MCA pml: parameter "pml_v_output" (current value: "stderr",
> data source: default value)
> MCA pml: parameter "pml_v_verbose" (current value: "0", data
> source: default value)
> MCA bml: parameter "bml" (current value: <none>, data
> source: default value)
> Default selection set of components for the bml
> framework (<none> means use all components that can be found)
> MCA bml: parameter "bml_base_verbose" (current value: "0",
> data source: default value)
> Verbosity level for the bml framework (0 = no
> verbosity)
> MCA bml: parameter "bml_r2_show_unreach_errors" (current
> value: "1", data source: default value)
> Show error message when procs are unreachable
> MCA bml: parameter "bml_r2_priority" (current value: "0",
> data source: default value)
> MCA rcache: parameter "rcache" (current value: <none>, data
> source: default value)
> Default selection set of components for the rcache
> framework (<none> means use all components that can be found)
> MCA rcache: parameter "rcache_base_verbose" (current value:
> "0", data source: default value)
> Verbosity level for the rcache framework (0 = no
> verbosity)
> MCA rcache: parameter "rcache_vma_priority" (current value:
> "0", data source: default value)
> MCA btl: parameter "btl_base_verbose" (current value: "0",
> data source: default value)
> Verbosity level of the BTL framework
> MCA btl: parameter "btl" (current value: <none>, data
> source: default value)
> Default selection set of components for the btl
> framework (<none> means use all components that can be found)
> MCA btl: parameter "btl_self_free_list_num" (current value:
> "0", data source: default value)
> Number of fragments by default
> MCA btl: parameter "btl_self_free_list_max" (current value:
> "-1", data source: default value)
> Maximum number of fragments
> MCA btl: parameter "btl_self_free_list_inc" (current value:
> "32", data source: default value)
> Increment by this number of fragments
> MCA btl: parameter "btl_self_exclusivity" (current value:
> "65536", data source: default value)
> BTL exclusivity (must be >= 0)
> MCA btl: parameter "btl_self_flags" (current value: "10",
> data source: default value)
> BTL bit flags (general flags: SEND=1, PUT=2, GET=4,
> SEND_INPLACE=8, RDMA_MATCHED=64, HETEROGENEOUS_RDMA=256; flags only used by
> the "dr" PML (ignored by others): ACK=16, CHECKSUM=32, RDMA_COMPLETION=128)
> MCA btl: parameter "btl_self_rndv_eager_limit" (current
> value: "131072", data source: default value)
> Size (in bytes) of "phase 1" fragment sent for all
> large messages (must be >= 0 and <= eager_limit)
> MCA btl: parameter "btl_self_eager_limit" (current value:
> "131072", data source: default value)
> Maximum size (in bytes) of "short" messages (must
> be >= 1).
> MCA btl: parameter "btl_self_max_send_size" (current value:
> "262144", data source: default value)
> Maximum size (in bytes) of a single "phase 2"
> fragment of a long message when using the pipeline protocol (must be >= 1)
> MCA btl: parameter "btl_self_rdma_pipeline_send_length"
> (current value: "2147483647", data source: default value)
> Length of the "phase 2" portion of a large message
> (in bytes) when using the pipeline protocol. This part of the message will
> be split into fragments of size max_send_size and sent using send/receive
> semantics (must be >= 0; only relevant when the PUT flag is set)
> MCA btl: parameter "btl_self_rdma_pipeline_frag_size"
> (current value: "2147483647", data source: default value)
> Maximum size (in bytes) of a single "phase 3"
> fragment from a long message when using the pipeline protocol. These
> fragments will be sent using RDMA semantics (must be >= 1; only relevant when
> the PUT flag is set)
> MCA btl: parameter "btl_self_min_rdma_pipeline_size"
> (current value: "0", data source: default value)
> Messages smaller than this size (in bytes) will not
> use the RDMA pipeline protocol. Instead, they will be split into fragments
> of max_send_size and sent using send/receive semantics (must be >=0, and is
> automatically adjusted up to at least
> (eager_limit+btl_rdma_pipeline_send_length); only relevant when the PUT flag
> is set)
> MCA btl: parameter "btl_self_bandwidth" (current value:
> "100", data source: default value)
> Approximate maximum bandwidth of interconnect(must
> be >= 1)
> MCA btl: parameter "btl_self_latency" (current value: "0",
> data source: default value)
> Approximate latency of interconnect (must be >= 0)
> MCA btl: parameter "btl_self_priority" (current value: "0",
> data source: default value)
> MCA btl: parameter "btl_sm_free_list_num" (current value:
> "8", data source: default value)
> MCA btl: parameter "btl_sm_free_list_max" (current value:
> "-1", data source: default value)
> MCA btl: parameter "btl_sm_free_list_inc" (current value:
> "64", data source: default value)
> MCA btl: parameter "btl_sm_max_procs" (current value: "-1",
> data source: default value)
> MCA btl: parameter "btl_sm_mpool" (current value: "sm", data
> source: default value)
> MCA btl: parameter "btl_sm_fifo_size" (current value:
> "4096", data source: default value)
> MCA btl: parameter "btl_sm_num_fifos" (current value: "1",
> data source: default value)
> MCA btl: parameter "btl_sm_fifo_lazy_free" (current value:
> "120", data source: default value)
> MCA btl: parameter "btl_sm_sm_extra_procs" (current value:
> "0", data source: default value)
> MCA btl: parameter "btl_sm_exclusivity" (current value:
> "65535", data source: default value)
> BTL exclusivity (must be >= 0)
> MCA btl: parameter "btl_sm_flags" (current value: "1", data
> source: default value)
> BTL bit flags (general flags: SEND=1, PUT=2, GET=4,
> SEND_INPLACE=8, RDMA_MATCHED=64, HETEROGENEOUS_RDMA=256; flags only used by
> the "dr" PML (ignored by others): ACK=16, CHECKSUM=32, RDMA_COMPLETION=128)
> MCA btl: parameter "btl_sm_rndv_eager_limit" (current value:
> "4096", data source: default value)
> Size (in bytes) of "phase 1" fragment sent for all
> large messages (must be >= 0 and <= eager_limit)
> MCA btl: parameter "btl_sm_eager_limit" (current value:
> "4096", data source: default value)
> Maximum size (in bytes) of "short" messages (must
> be >= 1).
> MCA btl: parameter "btl_sm_max_send_size" (current value:
> "32768", data source: default value)
> Maximum size (in bytes) of a single "phase 2"
> fragment of a long message when using the pipeline protocol (must be >= 1)
> MCA btl: parameter "btl_sm_bandwidth" (current value: "900",
> data source: default value)
> Approximate maximum bandwidth of interconnect(must
> be >= 1)
> MCA btl: parameter "btl_sm_latency" (current value: "100",
> data source: default value)
> Approximate latency of interconnect (must be >= 0)
> MCA btl: parameter "btl_sm_priority" (current value: "0",
> data source: default value)
> MCA btl: parameter "btl_ofud_max_btls" (current value: "4",
> data source: default value)
> Maximum number of HCAs/ports to use
> MCA btl: parameter "btl_ofud_mpool" (current value: "rdma",
> data source: default value)
> Name of the memory pool to be used
> MCA btl: parameter "btl_ofud_ib_pkey_index" (current value:
> "0", data source: default value)
> IB pkey index
> MCA btl: parameter "btl_ofud_ib_qkey" (current value:
> "20119859", data source: default value)
> IB qkey
> MCA btl: parameter "btl_ofud_ib_service_level" (current
> value: "0", data source: default value)
> IB service level
> MCA btl: parameter "btl_ofud_ib_src_path_bits" (current
> value: "0", data source: default value)
> IB source path bits
> MCA btl: parameter "btl_ofud_sd_num" (current value: "128",
> data source: default value)
> maximum send descriptors to post
> MCA btl: parameter "btl_ofud_rd_num" (current value: "6000",
> data source: default value)
> number of receive buffers
> MCA btl: parameter "btl_ofud_min_send_size" (current value:
> "2048", data source: default value)
> minimum send size
> MCA btl: parameter "btl_ofud_max_send_size" (current value:
> "2048", data source: default value)
> maximum send size
> MCA btl: parameter "btl_ofud_exclusivity" (current value:
> "1024", data source: default value)
> BTL exclusivity
> MCA btl: parameter "btl_ofud_bandwidth" (current value:
> "800", data source: default value)
> Approximate maximum bandwidth of interconnect
> MCA btl: parameter "btl_ofud_priority" (current value: "0",
> data source: default value)
> MCA btl: parameter "btl_openib_verbose" (current value: "0",
> data source: default value)
> Output some verbose OpenIB BTL information (0 = no
> output, nonzero = output)
> MCA btl: parameter "btl_openib_warn_no_device_params_found"
> (current value: "1", data source: default value, synonyms:
> btl_openib_warn_no_hca_params_found)
> Warn when no device-specific parameters are found
> in the INI file specified by the btl_openib_device_param_files MCA parameter
> (0 = do not warn; any other value = warn)
> MCA btl: parameter "btl_openib_warn_no_hca_params_found"
> (current value: "1", data source: default value, deprecated, synonym of:
> btl_openib_warn_no_device_params_found)
> Warn when no device-specific parameters are found
> in the INI file specified by the btl_openib_device_param_files MCA parameter
> (0 = do not warn; any other value = warn)
> MCA btl: parameter "btl_openib_warn_default_gid_prefix"
> (current value: "1", data source: default value)
> Warn when there is more than one active ports and
> at least one of them connected to the network with only default GID prefix
> configured (0 = do not warn; any other value = warn)
> MCA btl: parameter "btl_openib_warn_nonexistent_if" (current
> value: "1", data source: default value)
> Warn if non-existent devices and/or ports are
> specified in the btl_openib_if_[in|ex]clude MCA parameters (0 = do not warn;
> any other value = warn)
> MCA btl: parameter "btl_openib_want_fork_support" (current
> value: "-1", data source: default value)
> Whether fork support is desired or not (negative =
> try to enable fork support, but continue even if it is not available, 0 = do
> not enable fork support, positive = try to enable fork support and fail if it
> is not available)
> MCA btl: parameter "btl_openib_device_param_files" (current
> value:
> "/scinet/gpc/mpi/openmpi/1.4.4-gcc-v4.6.1/share/openmpi/mca-btl-openib-device-params.ini",
> data source: default value, synonyms: btl_openib_hca_param_files)
> Colon-delimited list of INI-style files that
> contain device vendor/part-specific parameters
> MCA btl: parameter "btl_openib_hca_param_files" (current
> value:
> "/scinet/gpc/mpi/openmpi/1.4.4-gcc-v4.6.1/share/openmpi/mca-btl-openib-device-params.ini",
> data source: default value, deprecated, synonym of:
> btl_openib_device_param_files)
> Colon-delimited list of INI-style files that
> contain device vendor/part-specific parameters
> MCA btl: parameter "btl_openib_device_type" (current value:
> "all", data source: default value)
> Specify to only use IB or iWARP network adapters
> (infiniband = only use InfiniBand HCAs; iwarp = only use iWARP NICs; all =
> use any available adapters)
> MCA btl: parameter "btl_openib_max_btls" (current value:
> "-1", data source: default value)
> Maximum number of device ports to use (-1 = use all
> available, otherwise must be >= 1)
> MCA btl: parameter "btl_openib_free_list_num" (current
> value: "8", data source: default value)
> Intial size of free lists (must be >= 1)
> MCA btl: parameter "btl_openib_free_list_max" (current
> value: "-1", data source: default value)
> Maximum size of free lists (-1 = infinite,
> otherwise must be >= 0)
> MCA btl: parameter "btl_openib_free_list_inc" (current
> value: "32", data source: default value)
> Increment size of free lists (must be >= 1)
> MCA btl: parameter "btl_openib_mpool" (current value:
> "rdma", data source: default value)
> Name of the memory pool to be used (it is unlikely
> that you will ever want to change this
> MCA btl: parameter "btl_openib_reg_mru_len" (current value:
> "16", data source: default value)
> Length of the registration cache most recently used
> list (must be >= 1)
> MCA btl: parameter "btl_openib_cq_size" (current value:
> "1000", data source: default value, synonyms: btl_openib_ib_cq_size)
> Minimum size of the OpenFabrics completion queue
> (CQs are automatically sized based on the number of peer MPI processes; this
> value determines the *minimum* size of all CQs)
> MCA btl: parameter "btl_openib_ib_cq_size" (current value:
> "1000", data source: default value, deprecated, synonym of:
> btl_openib_cq_size)
> Minimum size of the OpenFabrics completion queue
> (CQs are automatically sized based on the number of peer MPI processes; this
> value determines the *minimum* size of all CQs)
> MCA btl: parameter "btl_openib_max_inline_data" (current
> value: "-1", data source: default value, synonyms:
> btl_openib_ib_max_inline_data)
> Maximum size of inline data segment (-1 = run-time
> probe to discover max value, otherwise must be >= 0). If not explicitly set,
> use max_inline_data from the INI file containing device-specific parameters
> MCA btl: parameter "btl_openib_ib_max_inline_data" (current
> value: "-1", data source: default value, deprecated, synonym of:
> btl_openib_max_inline_data)
> Maximum size of inline data segment (-1 = run-time
> probe to discover max value, otherwise must be >= 0). If not explicitly set,
> use max_inline_data from the INI file containing device-specific parameters
> MCA btl: parameter "btl_openib_pkey" (current value: "0",
> data source: default value, synonyms: btl_openib_ib_pkey_val)
> OpenFabrics partition key (pkey) value. Unsigned
> integer decimal or hex values are allowed (e.g., "3" or "0x3f") and will be
> masked against the maximum allowable IB paritition key value (0x7fff)
> MCA btl: parameter "btl_openib_ib_pkey_val" (current value:
> "0", data source: default value, deprecated, synonym of: btl_openib_pkey)
> OpenFabrics partition key (pkey) value. Unsigned
> integer decimal or hex values are allowed (e.g., "3" or "0x3f") and will be
> masked against the maximum allowable IB paritition key value (0x7fff)
> MCA btl: parameter "btl_openib_psn" (current value: "0",
> data source: default value, synonyms: btl_openib_ib_psn)
> OpenFabrics packet sequence starting number (must
> be >= 0)
> MCA btl: parameter "btl_openib_ib_psn" (current value: "0",
> data source: default value, deprecated, synonym of: btl_openib_psn)
> OpenFabrics packet sequence starting number (must
> be >= 0)
> MCA btl: parameter "btl_openib_ib_qp_ous_rd_atom" (current
> value: "4", data source: default value)
> InfiniBand outstanding atomic reads (must be >= 0)
> MCA btl: parameter "btl_openib_mtu" (current value: "3",
> data source: default value, synonyms: btl_openib_ib_mtu)
> OpenFabrics MTU, in bytes (if not specified in INI
> files). Valid values are: 1=256 bytes, 2=512 bytes, 3=1024 bytes, 4=2048
> bytes, 5=4096 bytes
> MCA btl: parameter "btl_openib_ib_mtu" (current value: "3",
> data source: default value, deprecated, synonym of: btl_openib_mtu)
> OpenFabrics MTU, in bytes (if not specified in INI
> files). Valid values are: 1=256 bytes, 2=512 bytes, 3=1024 bytes, 4=2048
> bytes, 5=4096 bytes
> MCA btl: parameter "btl_openib_ib_min_rnr_timer" (current
> value: "25", data source: default value)
> InfiniBand minimum "receiver not ready" timer, in
> seconds (must be >= 0 and <= 31)
> MCA btl: parameter "btl_openib_ib_timeout" (current value:
> "20", data source: default value)
> InfiniBand transmit timeout, plugged into formula:
> 4.096 microseconds * (2^btl_openib_ib_timeout)(must be >= 0 and <= 31)
> MCA btl: parameter "btl_openib_ib_retry_count" (current
> value: "7", data source: default value)
> InfiniBand transmit retry count (must be >= 0 and
> <= 7)
> MCA btl: parameter "btl_openib_ib_rnr_retry" (current value:
> "7", data source: default value)
> InfiniBand "receiver not ready" retry count;
> applies *only* to SRQ/XRC queues. PP queues use RNR retry values of 0
> because Open MPI performs software flow control to guarantee that RNRs never
> occur (must be >= 0 and <= 7; 7 = "infinite")
> MCA btl: parameter "btl_openib_ib_max_rdma_dst_ops" (current
> value: "4", data source: default value)
> InfiniBand maximum pending RDMA destination
> operations (must be >= 0)
> MCA btl: parameter "btl_openib_ib_service_level" (current
> value: "0", data source: default value)
> InfiniBand service level (must be >= 0 and <= 15)
> MCA btl: parameter "btl_openib_use_eager_rdma" (current
> value: "-1", data source: default value)
> Use RDMA for eager messages (-1 = use device
> default, 0 = do not use eager RDMA, 1 = use eager RDMA)
> MCA btl: parameter "btl_openib_eager_rdma_threshold"
> (current value: "16", data source: default value)
> Use RDMA for short messages after this number of
> messages are received from a given peer (must be >= 1)
> MCA btl: parameter "btl_openib_max_eager_rdma" (current
> value: "16", data source: default value)
> Maximum number of peers allowed to use RDMA for
> short messages (RDMA is used for all long messages, except if explicitly
> disabled, such as with the "dr" pml) (must be >= 0)
> MCA btl: parameter "btl_openib_eager_rdma_num" (current
> value: "16", data source: default value)
> Number of RDMA buffers to allocate for small
> messages(must be >= 1)
> MCA btl: parameter "btl_openib_btls_per_lid" (current value:
> "1", data source: default value)
> Number of BTLs to create for each InfiniBand LID
> (must be >= 1)
> MCA btl: parameter "btl_openib_max_lmc" (current value: "0",
> data source: default value)
> Maximum number of LIDs to use for each device port
> (must be >= 0, where 0 = use all available)
> MCA btl: parameter "btl_openib_enable_apm_over_lmc" (current
> value: "0", data source: default value)
> Maximum number of alterative paths for each device
> port (must be >= -1, where 0 = disable apm, -1 = all availible alternative
> paths )
> MCA btl: parameter "btl_openib_enable_apm_over_ports"
> (current value: "0", data source: default value)
> Enable alterative path migration (APM) over
> different ports of the same device (must be >= 0, where 0 = disable APM over
> ports , 1 = enable APM over ports of the same device)
> MCA btl: parameter "btl_openib_use_async_event_thread"
> (current value: "1", data source: default value)
> If nonzero, use the thread that will handle
> InfiniBand asyncihronous events
> MCA btl: parameter "btl_openib_buffer_alignment" (current
> value: "64", data source: default value)
> Prefered communication buffer alignment, in bytes
> (must be > 0 and power of two)
> MCA btl: parameter "btl_openib_use_message_coalescing"
> (current value: "1", data source: default value)
> Use message coalescing
> MCA btl: parameter "btl_openib_cq_poll_ratio" (current
> value: "100", data source: default value)
> how often poll high priority CQ versus low priority
> CQ
> MCA btl: parameter "btl_openib_eager_rdma_poll_ratio"
> (current value: "100", data source: default value)
> how often poll eager RDMA channel versus CQ
> MCA btl: parameter "btl_openib_hp_cq_poll_per_progress"
> (current value: "10", data source: default value)
> max number of completion events to process for each
> call of BTL progress engine
> MCA btl: information "btl_openib_have_fork_support" (value:
> "1", data source: default value)
> Whether the OpenFabrics stack supports applications
> that invoke the "fork()" system call or not (0 = no, 1 = yes). Note that
> this value does NOT indicate whether the system being run on supports
> "fork()" with OpenFabrics applications or not.
> MCA btl: parameter "btl_openib_exclusivity" (current value:
> "1024", data source: default value)
> BTL exclusivity (must be >= 0)
> MCA btl: parameter "btl_openib_flags" (current value: "310",
> data source: default value)
> BTL bit flags (general flags: SEND=1, PUT=2, GET=4,
> SEND_INPLACE=8, RDMA_MATCHED=64, HETEROGENEOUS_RDMA=256; flags only used by
> the "dr" PML (ignored by others): ACK=16, CHECKSUM=32, RDMA_COMPLETION=128)
> MCA btl: parameter "btl_openib_rndv_eager_limit" (current
> value: "12288", data source: default value)
> Size (in bytes) of "phase 1" fragment sent for all
> large messages (must be >= 0 and <= eager_limit)
> MCA btl: parameter "btl_openib_eager_limit" (current value:
> "12288", data source: default value)
> Maximum size (in bytes) of "short" messages (must
> be >= 1).
> MCA btl: parameter "btl_openib_max_send_size" (current
> value: "65536", data source: default value)
> Maximum size (in bytes) of a single "phase 2"
> fragment of a long message when using the pipeline protocol (must be >= 1)
> MCA btl: parameter "btl_openib_rdma_pipeline_send_length"
> (current value: "1048576", data source: default value)
> Length of the "phase 2" portion of a large message
> (in bytes) when using the pipeline protocol. This part of the message will
> be split into fragments of size max_send_size and sent using send/receive
> semantics (must be >= 0; only relevant when the PUT flag is set)
> MCA btl: parameter "btl_openib_rdma_pipeline_frag_size"
> (current value: "1048576", data source: default value)
> Maximum size (in bytes) of a single "phase 3"
> fragment from a long message when using the pipeline protocol. These
> fragments will be sent using RDMA semantics (must be >= 1; only relevant when
> the PUT flag is set)
> MCA btl: parameter "btl_openib_min_rdma_pipeline_size"
> (current value: "262144", data source: default value)
> Messages smaller than this size (in bytes) will not
> use the RDMA pipeline protocol. Instead, they will be split into fragments
> of max_send_size and sent using send/receive semantics (must be >=0, and is
> automatically adjusted up to at least
> (eager_limit+btl_rdma_pipeline_send_length); only relevant when the PUT flag
> is set)
> MCA btl: parameter "btl_openib_bandwidth" (current value:
> "800", data source: default value)
> Approximate maximum bandwidth of interconnect(must
> be >= 1)
> MCA btl: parameter "btl_openib_latency" (current value:
> "10", data source: default value)
> Approximate latency of interconnect (must be >= 0)
> MCA btl: parameter "btl_openib_receive_queues" (current
> value:
> "P,128,256,192,128:S,2048,256,128,32:S,12288,256,128,32:S,65536,256,128,32",
> data source: default value)
> Colon-delimited, comma delimited list of receive
> queues: P,4096,8,6,4:P,32768,8,6,4
> MCA btl: parameter "btl_openib_if_include" (current value:
> <none>, data source: default value)
> Comma-delimited list of devices/ports to be used
> (e.g. "mthca0,mthca1:2"; empty value means to use all ports found). Mutually
> exclusive with btl_openib_if_exclude.
> MCA btl: parameter "btl_openib_if_exclude" (current value:
> <none>, data source: default value)
> Comma-delimited list of device/ports to be excluded
> (empty value means to not exclude any ports). Mutually exclusive with
> btl_openib_if_include.
> MCA btl: parameter "btl_openib_ipaddr_include" (current
> value: <none>, data source: default value)
> Comma-delimited list of IP Addresses to be used
> (e.g. "192.168.1.0/24"). Mutually exclusive with btl_openib_ipaddr_exclude.
> MCA btl: parameter "btl_openib_ipaddr_exclude" (current
> value: <none>, data source: default value)
> Comma-delimited list of IP Addresses to be excluded
> (e.g. "192.168.1.0/24"). Mutually exclusive with btl_openib_ipaddr_include.
> MCA btl: parameter "btl_openib_cpc_include" (current value:
> <none>, data source: default value)
> Method used to select OpenFabrics connections
> (valid values: oob,xoob,rdmacm)
> MCA btl: parameter "btl_openib_cpc_exclude" (current value:
> <none>, data source: default value)
> Method used to exclude OpenFabrics connections
> (valid values: oob,xoob,rdmacm)
> MCA btl: parameter "btl_openib_connect_oob_priority"
> (current value: "50", data source: default value)
> The selection method priority for oob
> MCA btl: parameter "btl_openib_connect_xoob_priority"
> (current value: "60", data source: default value)
> The selection method priority for xoob
> MCA btl: parameter "btl_openib_connect_rdmacm_priority"
> (current value: "30", data source: default value)
> The selection method priority for rdma_cm
> MCA btl: parameter "btl_openib_connect_rdmacm_port" (current
> value: "0", data source: default value)
> The selection method port for rdma_cm
> MCA btl: parameter
> "btl_openib_connect_rdmacm_resolve_timeout" (current value: "30000", data
> source: default value)
> The timeout (in miliseconds) for address and route
> resolution
> MCA btl: parameter "btl_openib_connect_rdmacm_retry_count"
> (current value: "20", data source: default value)
> Maximum number of times rdmacm will retry route
> resolution
> MCA btl: parameter
> "btl_openib_connect_rdmacm_reject_causes_connect_error" (current value: "0",
> data source: default value)
> The drivers for some devices are buggy such that an
> RDMA REJECT action may result in a CONNECT_ERROR event instead of a REJECTED
> event. Setting this MCA parameter to true tells Open MPI to treat
> CONNECT_ERROR events on connections where a REJECT is expected as a REJECT
> (default: false)
> MCA btl: parameter "btl_openib_priority" (current value:
> "0", data source: default value)
> MCA btl: parameter "btl_tcp_links" (current value: "1", data
> source: default value)
> MCA btl: parameter "btl_tcp_if_include" (current value:
> <none>, data source: default value)
> MCA btl: parameter "btl_tcp_if_exclude" (current value:
> "lo", data source: default value)
> MCA btl: parameter "btl_tcp_free_list_num" (current value:
> "8", data source: default value)
> MCA btl: parameter "btl_tcp_free_list_max" (current value:
> "-1", data source: default value)
> MCA btl: parameter "btl_tcp_free_list_inc" (current value:
> "32", data source: default value)
> MCA btl: parameter "btl_tcp_sndbuf" (current value:
> "131072", data source: default value)
> MCA btl: parameter "btl_tcp_rcvbuf" (current value:
> "131072", data source: default value)
> MCA btl: parameter "btl_tcp_endpoint_cache" (current value:
> "30720", data source: default value)
> The size of the internal cache for each TCP
> connection. This cache is used to reduce the number of syscalls, by replacing
> them with memcpy. Every read will read the expected data plus the amount of
> the endpoint_cache
> MCA btl: parameter "btl_tcp_use_nagle" (current value: "0",
> data source: default value)
> Whether to use Nagle's algorithm or not (using
> Nagle's algorithm may increase short message latency)
> MCA btl: parameter "btl_tcp_port_min_v4" (current value:
> "1024", data source: default value)
> The minimum port where the TCP BTL will try to bind
> (default 1024)
> MCA btl: parameter "btl_tcp_port_range_v4" (current value:
> "64511", data source: default value)
> The number of ports where the TCP BTL will try to
> bind (default 64511). This parameter together with the port min, define a
> range of ports where Open MPI will open sockets.
> MCA btl: parameter "btl_tcp_port_min_v6" (current value:
> "1024", data source: default value)
> The minimum port where the TCP BTL will try to bind
> (default 1024)
> MCA btl: parameter "btl_tcp_port_range_v6" (current value:
> "64511", data source: default value)
> The number of ports where the TCP BTL will try to
> bind (default 64511). This parameter together with the port min, define a
> range of ports where Open MPI will open sockets.
> MCA btl: parameter "btl_tcp_exclusivity" (current value:
> "100", data source: default value)
> BTL exclusivity (must be >= 0)
> MCA btl: parameter "btl_tcp_flags" (current value: "314",
> data source: default value)
> BTL bit flags (general flags: SEND=1, PUT=2, GET=4,
> SEND_INPLACE=8, RDMA_MATCHED=64, HETEROGENEOUS_RDMA=256; flags only used by
> the "dr" PML (ignored by others): ACK=16, CHECKSUM=32, RDMA_COMPLETION=128)
> MCA btl: parameter "btl_tcp_rndv_eager_limit" (current
> value: "65536", data source: default value)
> Size (in bytes) of "phase 1" fragment sent for all
> large messages (must be >= 0 and <= eager_limit)
> MCA btl: parameter "btl_tcp_eager_limit" (current value:
> "65536", data source: default value)
> Maximum size (in bytes) of "short" messages (must
> be >= 1).
> MCA btl: parameter "btl_tcp_max_send_size" (current value:
> "131072", data source: default value)
> Maximum size (in bytes) of a single "phase 2"
> fragment of a long message when using the pipeline protocol (must be >= 1)
> MCA btl: parameter "btl_tcp_rdma_pipeline_send_length"
> (current value: "131072", data source: default value)
> Length of the "phase 2" portion of a large message
> (in bytes) when using the pipeline protocol. This part of the message will
> be split into fragments of size max_send_size and sent using send/receive
> semantics (must be >= 0; only relevant when the PUT flag is set)
> MCA btl: parameter "btl_tcp_rdma_pipeline_frag_size"
> (current value: "2147483647", data source: default value)
> Maximum size (in bytes) of a single "phase 3"
> fragment from a long message when using the pipeline protocol. These
> fragments will be sent using RDMA semantics (must be >= 1; only relevant when
> the PUT flag is set)
> MCA btl: parameter "btl_tcp_min_rdma_pipeline_size" (current
> value: "0", data source: default value)
> Messages smaller than this size (in bytes) will not
> use the RDMA pipeline protocol. Instead, they will be split into fragments
> of max_send_size and sent using send/receive semantics (must be >=0, and is
> automatically adjusted up to at least
> (eager_limit+btl_rdma_pipeline_send_length); only relevant when the PUT flag
> is set)
> MCA btl: parameter "btl_tcp_bandwidth" (current value:
> "100", data source: default value)
> Approximate maximum bandwidth of interconnect(must
> be >= 1)
> MCA btl: parameter "btl_tcp_latency" (current value: "100",
> data source: default value)
> Approximate latency of interconnect (must be >= 0)
> MCA btl: parameter "btl_tcp_disable_family" (current value:
> "0", data source: default value)
> MCA btl: parameter "btl_tcp_priority" (current value: "0",
> data source: default value)
> MCA btl: parameter "btl_base_include" (current value:
> <none>, data source: default value)
> MCA btl: parameter "btl_base_exclude" (current value:
> <none>, data source: default value)
> MCA btl: parameter "btl_base_warn_component_unused" (current
> value: "1", data source: default value)
> This parameter is used to turn on warning messages
> when certain NICs are not used
> MCA mtl: parameter "mtl" (current value: <none>, data
> source: default value)
> Default selection set of components for the mtl
> framework (<none> means use all components that can be found)
> MCA mtl: parameter "mtl_base_verbose" (current value: "0",
> data source: default value)
> Verbosity level for the mtl framework (0 = no
> verbosity)
> MCA topo: parameter "topo" (current value: <none>, data
> source: default value)
> Default selection set of components for the topo
> framework (<none> means use all components that can be found)
> MCA topo: parameter "topo_base_verbose" (current value: "0",
> data source: default value)
> Verbosity level for the topo framework (0 = no
> verbosity)
> MCA topo: parameter "topo_unity_priority" (current value:
> "0", data source: default value)
> MCA osc: parameter "osc" (current value: <none>, data
> source: default value)
> Default selection set of components for the osc
> framework (<none> means use all components that can be found)
> MCA osc: parameter "osc_base_verbose" (current value: "0",
> data source: default value)
> Verbosity level for the osc framework (0 = no
> verbosity)
> MCA osc: parameter "osc_pt2pt_no_locks" (current value: "0",
> data source: default value)
> Enable optimizations available only if MPI_LOCK is
> not used.
> MCA osc: parameter "osc_pt2pt_eager_limit" (current value:
> "16384", data source: default value)
> Max size of eagerly sent data
> MCA osc: parameter "osc_pt2pt_priority" (current value: "0",
> data source: default value)
> MCA osc: parameter "osc_rdma_eager_send" (current value:
> "1", data source: default value)
> Attempt to start data movement during communication
> call, instead of at synchrnoization time. Info key of same name overrides
> this value.
> MCA osc: parameter "osc_rdma_use_buffers" (current value:
> "0", data source: default value)
> Coalesce messages during an epoch to reduce network
> utilization. Info key of same name overrides this value.
> MCA osc: parameter "osc_rdma_use_rdma" (current value: "0",
> data source: default value)
> Use real RDMA operations to transfer data. Info
> key of same name overrides this value.
> MCA osc: parameter "osc_rdma_rdma_completion_wait" (current
> value: "1", data source: default value)
> Wait for all completion of rdma events before
> sending acknowledgment. Info key of same name overrides this value.
> MCA osc: parameter "osc_rdma_no_locks" (current value: "0",
> data source: default value)
> Enable optimizations available only if MPI_LOCK is
> not used. Info key of same name overrides this value.
> MCA osc: parameter "osc_rdma_priority" (current value: "0",
> data source: default value)
> MCA iof: parameter "iof" (current value: <none>, data
> source: default value)
> Default selection set of components for the iof
> framework (<none> means use all components that can be found)
> MCA iof: parameter "iof_base_verbose" (current value: "0",
> data source: default value)
> Verbosity level for the iof framework (0 = no
> verbosity)
> MCA iof: parameter "iof_hnp_priority" (current value: "0",
> data source: default value)
> MCA iof: parameter "iof_orted_priority" (current value: "0",
> data source: default value)
> MCA iof: parameter "iof_tool_priority" (current value: "0",
> data source: default value)
> MCA oob: parameter "oob" (current value: <none>, data
> source: default value)
> Default selection set of components for the oob
> framework (<none> means use all components that can be found)
> MCA oob: parameter "oob_base_verbose" (current value: "0",
> data source: default value)
> Verbosity level for the oob framework (0 = no
> verbosity)
> MCA oob: parameter "oob_tcp_verbose" (current value: "0",
> data source: default value)
> Verbose level for the OOB tcp component
> MCA oob: parameter "oob_tcp_peer_limit" (current value:
> "-1", data source: default value)
> Maximum number of peer connections to
> simultaneously maintain (-1 = infinite)
> MCA oob: parameter "oob_tcp_peer_retries" (current value:
> "60", data source: default value)
> Number of times to try shutting down a connection
> before giving up
> MCA oob: parameter "oob_tcp_debug" (current value: "0", data
> source: default value)
> Enable (1) / disable (0) debugging output for this
> component
> MCA oob: parameter "oob_tcp_sndbuf" (current value:
> "131072", data source: default value)
> TCP socket send buffering size (in bytes)
> MCA oob: parameter "oob_tcp_rcvbuf" (current value:
> "131072", data source: default value)
> TCP socket receive buffering size (in bytes)
> MCA oob: parameter "oob_tcp_if_include" (current value:
> <none>, data source: default value)
> Comma-delimited list of TCP interfaces to use
> MCA oob: parameter "oob_tcp_if_exclude" (current value:
> <none>, data source: default value)
> Comma-delimited list of TCP interfaces to exclude
> MCA oob: parameter "oob_tcp_connect_sleep" (current value:
> "1", data source: default value)
> Enable (1) / disable (0) random sleep for
> connection wireup.
> MCA oob: parameter "oob_tcp_listen_mode" (current value:
> "event", data source: default value)
> Mode for HNP to accept incoming connections: event,
> listen_thread.
> MCA oob: parameter "oob_tcp_listen_thread_max_queue"
> (current value: "10", data source: default value)
> High water mark for queued accepted socket list
> size. Used only when listen_mode is listen_thread.
> MCA oob: parameter "oob_tcp_listen_thread_wait_time"
> (current value: "10", data source: default value)
> Time in milliseconds to wait before actively
> checking for new connections when listen_mode is listen_thread.
> MCA oob: parameter "oob_tcp_port_min_v4" (current value:
> "0", data source: default value)
> Starting port allowed (IPv4)
> MCA oob: parameter "oob_tcp_port_range_v4" (current value:
> "65535", data source: default value)
> Range of allowed ports (IPv4)
> MCA oob: parameter "oob_tcp_disable_family" (current value:
> "0", data source: default value)
> Disable IPv4 (4) or IPv6 (6)
> MCA oob: parameter "oob_tcp_port_min_v6" (current value:
> "0", data source: default value)
> Starting port allowed (IPv6)
> MCA oob: parameter "oob_tcp_port_range_v6" (current value:
> "65535", data source: default value)
> Range of allowed ports (IPv6)
> MCA oob: parameter "oob_tcp_priority" (current value: "0",
> data source: default value)
> MCA odls: parameter "odls_base_sigkill_timeout" (current
> value: "1", data source: default value)
> Time to wait for a process to die after issuing a
> kill signal to it
> MCA odls: parameter "odls_base_report_bindings" (current
> value: "0", data source: default value)
> Report process bindings [default: no]
> MCA odls: parameter "odls" (current value: <none>, data
> source: default value)
> Default selection set of components for the odls
> framework (<none> means use all components that can be found)
> MCA odls: parameter "odls_base_verbose" (current value: "0",
> data source: default value)
> Verbosity level for the odls framework (0 = no
> verbosity)
> MCA odls: parameter "odls_default_priority" (current value:
> "0", data source: default value)
> MCA ras: parameter "ras_base_display_alloc" (current value:
> "0", data source: default value)
> Whether to display the allocation after it is
> determined
> MCA ras: parameter "ras_base_display_devel_alloc" (current
> value: "0", data source: default value)
> Whether to display a developer-detail allocation
> after it is determined
> MCA ras: parameter "ras" (current value: <none>, data
> source: default value)
> Default selection set of components for the ras
> framework (<none> means use all components that can be found)
> MCA ras: parameter "ras_base_verbose" (current value: "0",
> data source: default value)
> Verbosity level for the ras framework (0 = no
> verbosity)
> MCA ras: parameter "ras_slurm_priority" (current value:
> "75", data source: default value)
> Priority of the slurm ras component
> MCA ras: parameter "ras_tm_priority" (current value: "100",
> data source: default value)
> Priority of the tm ras component
> MCA ras: parameter "ras_tm_nodefile_dir" (current value:
> "/var/spool/torque/aux", data source: default value)
> The directory where the PBS nodefile can be found
> MCA rmaps: parameter "rmaps_rank_file_path" (current value:
> <none>, data source: default value, synonym of: orte_rankfile)
> Name of the rankfile to be used for mapping
> processes (relative or absolute path)
> MCA rmaps: parameter "rmaps_base_schedule_policy" (current
> value: "slot", data source: default value)
> Scheduling Policy for RMAPS. [slot (alias:core) |
> socket | board | node]
> MCA rmaps: parameter "rmaps_base_pernode" (current value: "0",
> data source: default value)
> Launch one ppn as directed
> MCA rmaps: parameter "rmaps_base_n_pernode" (current value:
> "-1", data source: default value)
> Launch n procs/node
> MCA rmaps: parameter "rmaps_base_n_perboard" (current value:
> "-1", data source: default value)
> Launch n procs/board
> MCA rmaps: parameter "rmaps_base_n_persocket" (current value:
> "-1", data source: default value)
> Launch n procs/socket
> MCA rmaps: parameter "rmaps_base_loadbalance" (current value:
> "0", data source: default value)
> Balance total number of procs across all allocated
> nodes
> MCA rmaps: parameter "rmaps_base_cpus_per_proc" (current
> value: "1", data source: default value, synonyms: rmaps_base_cpus_per_rank)
> Number of cpus to use for each rank [1-2**15
> (default=1)]
> MCA rmaps: parameter "rmaps_base_cpus_per_rank" (current
> value: "1", data source: default value, synonym of: rmaps_base_cpus_per_proc)
> Number of cpus to use for each rank [1-2**15
> (default=1)]
> MCA rmaps: parameter "rmaps_base_stride" (current value: "1",
> data source: default value)
> When binding multiple cores to a rank, the step
> size to use between cores [1-2**15 (default: 1)]
> MCA rmaps: parameter "rmaps_base_slot_list" (current value:
> <none>, data source: default value)
> List of processor IDs to bind MPI processes to
> (e.g., used in conjunction with rank files) [default=NULL]
> MCA rmaps: parameter "rmaps_base_no_schedule_local" (current
> value: "0", data source: default value)
> If false, allow scheduling MPI applications on the
> same node as mpirun (default). If true, do not schedule any MPI applications
> on the same node as mpirun
> MCA rmaps: parameter "rmaps_base_no_oversubscribe" (current
> value: "0", data source: default value)
> If true, then do not allow oversubscription of
> nodes - mpirun will return an error if there aren't enough nodes to launch
> all processes without oversubscribing
> MCA rmaps: parameter "rmaps_base_display_map" (current value:
> "0", data source: default value)
> Whether to display the process map after it is
> computed
> MCA rmaps: parameter "rmaps_base_display_devel_map" (current
> value: "0", data source: default value)
> Whether to display a developer-detail process map
> after it is computed
> MCA rmaps: parameter "rmaps" (current value: <none>, data
> source: default value)
> Default selection set of components for the rmaps
> framework (<none> means use all components that can be found)
> MCA rmaps: parameter "rmaps_base_verbose" (current value: "0",
> data source: default value)
> Verbosity level for the rmaps framework (0 = no
> verbosity)
> MCA rmaps: parameter "rmaps_load_balance_priority" (current
> value: "0", data source: default value)
> MCA rmaps: parameter "rmaps_rank_file_priority" (current
> value: "0", data source: default value)
> MCA rmaps: parameter "rmaps_round_robin_priority" (current
> value: "0", data source: default value)
> MCA rmaps: parameter "rmaps_seq_priority" (current value: "0",
> data source: default value)
> MCA rml: parameter "rml_wrapper" (current value: <none>,
> data source: default value)
> Use a Wrapper component around the selected RML
> component
> MCA rml: parameter "rml" (current value: <none>, data
> source: default value)
> Default selection set of components for the rml
> framework (<none> means use all components that can be found)
> MCA rml: parameter "rml_base_verbose" (current value: "0",
> data source: default value)
> Verbosity level for the rml framework (0 = no
> verbosity)
> MCA rml: parameter "rml_oob_priority" (current value: "0",
> data source: default value)
> MCA routed: parameter "routed" (current value: <none>, data
> source: default value)
> Default selection set of components for the routed
> framework (<none> means use all components that can be found)
> MCA routed: parameter "routed_base_verbose" (current value:
> "0", data source: default value)
> Verbosity level for the routed framework (0 = no
> verbosity)
> MCA routed: parameter "routed_binomial_priority" (current
> value: "0", data source: default value)
> MCA routed: parameter "routed_direct_priority" (current value:
> "0", data source: default value)
> MCA routed: parameter "routed_linear_priority" (current value:
> "0", data source: default value)
> MCA plm: parameter "plm" (current value: <none>, data
> source: default value)
> Default selection set of components for the plm
> framework (<none> means use all components that can be found)
> MCA plm: parameter "plm_base_verbose" (current value: "0",
> data source: default value)
> Verbosity level for the plm framework (0 = no
> verbosity)
> MCA plm: parameter "plm_rsh_num_concurrent" (current value:
> "128", data source: default value)
> How many plm_rsh_agent instances to invoke
> concurrently (must be > 0)
> MCA plm: parameter "plm_rsh_force_rsh" (current value: "0",
> data source: default value)
> Force the launcher to always use rsh
> MCA plm: parameter "plm_rsh_disable_qrsh" (current value:
> "0", data source: default value)
> Disable the launcher to use qrsh when under the SGE
> parallel environment
> MCA plm: parameter "plm_rsh_daemonize_qrsh" (current value:
> "0", data source: default value)
> Daemonize the orted under the SGE parallel
> environment
> MCA plm: parameter "plm_rsh_priority" (current value: "10",
> data source: default value)
> Priority of the rsh plm component
> MCA plm: parameter "plm_rsh_delay" (current value: "1", data
> source: default value)
> Delay (in seconds) between invocations of the
> remote agent, but only used when the "debug" MCA parameter is true, or the
> top-level MCA debugging is enabled (otherwise this value is ignored)
> MCA plm: parameter "plm_rsh_assume_same_shell" (current
> value: "1", data source: default value)
> If set to 1, assume that the shell on the remote
> node is the same as the shell on the local node. Otherwise, probe for what
> the remote shell.
> MCA plm: parameter "plm_rsh_agent" (current value: "ssh :
> rsh", data source: default value, synonyms: pls_rsh_agent)
> The command used to launch executables on remote
> nodes (typically either "ssh" or "rsh")
> MCA plm: parameter "plm_rsh_tree_spawn" (current value: "0",
> data source: default value)
> If set to 1, launch via a tree-based topology
> MCA plm: parameter "plm_slurm_args" (current value: <none>,
> data source: default value)
> Custom arguments to srun
> MCA plm: parameter "plm_slurm_priority" (current value: "0",
> data source: default value)
> MCA plm: parameter "plm_tm_want_path_check" (current value:
> "1", data source: default value)
> Whether the launching process should check for the
> plm_tm_orted executable in the PATH before launching (the TM API does not
> give an indication of failure; this is a somewhat-lame workaround; non-zero
> values enable this check)
> MCA plm: parameter "plm_tm_priority" (current value: "0",
> data source: default value)
> MCA filem: parameter "filem" (current value: <none>, data
> source: default value)
> Which Filem component to use (empty = auto-select)
> MCA filem: parameter "filem_base_verbose" (current value: "0",
> data source: default value)
> Verbosity level for the filem framework (0 = no
> verbosity)
> MCA filem: parameter "filem_rsh_priority" (current value:
> "20", data source: default value)
> Priority of the FILEM rsh component
> MCA filem: parameter "filem_rsh_verbose" (current value: "0",
> data source: default value)
> Verbose level for the FILEM rsh component
> MCA filem: parameter "filem_rsh_rcp" (current value: "scp",
> data source: default value)
> The rsh cp command for the FILEM rsh component
> MCA filem: parameter "filem_rsh_rsh" (current value: "ssh",
> data source: default value)
> The remote shell command for the FILEM rsh component
> MCA filem: parameter "filem_rsh_max_incomming" (current value:
> "10", data source: default value)
> Maximum number of incomming connections
> MCA filem: parameter "filem_rsh_max_outgoing" (current value:
> "10", data source: default value)
> Maximum number of out going connections (Currently
> not used)
> MCA errmgr: parameter "errmgr" (current value: <none>, data
> source: default value)
> Default selection set of components for the errmgr
> framework (<none> means use all components that can be found)
> MCA errmgr: parameter "errmgr_base_verbose" (current value:
> "0", data source: default value)
> Verbosity level for the errmgr framework (0 = no
> verbosity)
> MCA errmgr: parameter "errmgr_default_priority" (current value:
> "0", data source: default value)
> MCA ess: parameter "ess" (current value: <none>, data
> source: default value)
> Default selection set of components for the ess
> framework (<none> means use all components that can be found)
> MCA ess: parameter "ess_base_verbose" (current value: "0",
> data source: default value)
> Verbosity level for the ess framework (0 = no
> verbosity)
> MCA ess: parameter "ess_env_priority" (current value: "0",
> data source: default value)
> MCA ess: parameter "ess_hnp_priority" (current value: "0",
> data source: default value)
> MCA ess: parameter "ess_singleton_priority" (current value:
> "0", data source: default value)
> MCA ess: parameter "ess_slurm_priority" (current value: "0",
> data source: default value)
> MCA ess: parameter "ess_tool_priority" (current value: "0",
> data source: default value)
> MCA grpcomm: parameter "grpcomm" (current value: <none>, data
> source: default value)
> Default selection set of components for the grpcomm
> framework (<none> means use all components that can be found)
> MCA grpcomm: parameter "grpcomm_base_verbose" (current value:
> "0", data source: default value)
> Verbosity level for the grpcomm framework (0 = no
> verbosity)
> MCA grpcomm: parameter "grpcomm_bad_priority" (current value:
> "0", data source: default value)
> MCA grpcomm: parameter "grpcomm_basic_priority" (current value:
> "0", data source: default value)
> _______________________________________________
> users mailing list
> [email protected]
> http://www.open-mpi.org/mailman/listinfo.cgi/users
--
Rob Latham
Mathematics and Computer Science Division
Argonne National Lab, IL USA
