Oops! We had a typo in yesterday's fix -- fixed:
https://github.com/open-mpi/ompi/pull/5847
Ralph also put double extra super protection to make triple sure that this
error can't happen again in:
https://github.com/open-mpi/ompi/pull/5846
Both of these should be in tonight's nightly snapshot.
Thank you!
> On Oct 5, 2018, at 5:45 AM, Ralph H Castain <[email protected]> wrote:
>
> Please send Jeff and I the opal/mca/pmix/pmix4x/pmix/config.log again - we’ll
> need to see why it isn’t building. The patch definitely is not in the v4.0
> branch, but it should have been in master.
>
>
>> On Oct 5, 2018, at 2:04 AM, Siegmar Gross
>> <[email protected]> wrote:
>>
>> Hi Ralph, hi Jeff,
>>
>>
>> On 10/3/18 8:14 PM, Ralph H Castain wrote:
>>> Jeff and I talked and believe the patch in
>>> https://github.com/open-mpi/ompi/pull/5836 should fix the problem.
>>
>>
>> Today I've installed openmpi-master-201810050304-5f1c940 and
>> openmpi-v4.0.x-201810050241-c079666. Unfortunately, I still get the
>> same error for all seven versions that I was able to build.
>>
>> loki hello_1 114 mpicc --showme
>> gcc -I/usr/local/openmpi-master_64_gcc/include -fexceptions -pthread
>> -std=c11 -m64 -Wl,-rpath -Wl,/usr/local/openmpi-master_64_gcc/lib64
>> -Wl,--enable-new-dtags -L/usr/local/openmpi-master_64_gcc/lib64 -lmpi
>>
>> loki hello_1 115 ompi_info | grep "Open MPI repo revision"
>> Open MPI repo revision: v2.x-dev-6262-g5f1c940
>>
>> loki hello_1 116 mpicc hello_1_mpi.c
>>
>> loki hello_1 117 mpiexec -np 2 a.out
>> [loki:25575] [[64603,0],0] ORTE_ERROR_LOG: Not found in file
>> ../../../../../openmpi-master-201810050304-5f1c940/orte/mca/ess/hnp/ess_hnp_module.c
>> at line 320
>> --------------------------------------------------------------------------
>> It looks like orte_init failed for some reason; your parallel process is
>> likely to abort. There are many reasons that a parallel process can
>> fail during orte_init; some of which are due to configuration or
>> environment problems. This failure appears to be an internal failure;
>> here's some additional information (which may only be relevant to an
>> Open MPI developer):
>>
>> opal_pmix_base_select failed
>> --> Returned value Not found (-13) instead of ORTE_SUCCESS
>> --------------------------------------------------------------------------
>> loki hello_1 118
>>
>>
>> I don't know, if you have already applied your suggested patch or if the
>> error message is still from a version without that patch. Do you need
>> anything else?
>>
>>
>> Best regards
>>
>> Siegmar
>>
>>
>>>> On Oct 2, 2018, at 2:50 PM, Jeff Squyres (jsquyres) via users
>>>> <[email protected]> wrote:
>>>>
>>>> (Ralph sent me Siegmar's pmix config.log, which Siegmar sent to him
>>>> off-list)
>>>>
>>>> It looks like Siegmar passed --with-hwloc=internal.
>>>>
>>>> Open MPI's configure understood this and did the appropriate things.
>>>> PMIX's configure didn't.
>>>>
>>>> I think we need to add an adjustment into the PMIx configure.m4 in OMPI...
>>>>
>>>>
>>>>> On Oct 2, 2018, at 5:25 PM, Ralph H Castain <[email protected]> wrote:
>>>>>
>>>>> Hi Siegmar
>>>>>
>>>>> I honestly have no idea - for some reason, the PMIx component isn’t
>>>>> seeing the internal hwloc code in your environment.
>>>>>
>>>>> Jeff, Brice - any ideas?
>>>>>
>>>>>
>>>>>> On Oct 2, 2018, at 1:18 PM, Siegmar Gross
>>>>>> <[email protected]> wrote:
>>>>>>
>>>>>> Hi Ralph,
>>>>>>
>>>>>> how can I confirm that HWLOC built? Some hwloc files are available
>>>>>> in the built directory.
>>>>>>
>>>>>> loki openmpi-master-201809290304-73075b8-Linux.x86_64.64_gcc 111 find .
>>>>>> -name '*hwloc*'
>>>>>> ./opal/mca/btl/usnic/.deps/btl_usnic_hwloc.Plo
>>>>>> ./opal/mca/hwloc
>>>>>> ./opal/mca/hwloc/external/.deps/hwloc_external_component.Plo
>>>>>> ./opal/mca/hwloc/base/hwloc_base_frame.lo
>>>>>> ./opal/mca/hwloc/base/.deps/hwloc_base_dt.Plo
>>>>>> ./opal/mca/hwloc/base/.deps/hwloc_base_maffinity.Plo
>>>>>> ./opal/mca/hwloc/base/.deps/hwloc_base_frame.Plo
>>>>>> ./opal/mca/hwloc/base/.deps/hwloc_base_util.Plo
>>>>>> ./opal/mca/hwloc/base/hwloc_base_dt.lo
>>>>>> ./opal/mca/hwloc/base/hwloc_base_util.lo
>>>>>> ./opal/mca/hwloc/base/hwloc_base_maffinity.lo
>>>>>> ./opal/mca/hwloc/base/.libs/hwloc_base_util.o
>>>>>> ./opal/mca/hwloc/base/.libs/hwloc_base_dt.o
>>>>>> ./opal/mca/hwloc/base/.libs/hwloc_base_maffinity.o
>>>>>> ./opal/mca/hwloc/base/.libs/hwloc_base_frame.o
>>>>>> ./opal/mca/hwloc/.libs/libmca_hwloc.la
>>>>>> ./opal/mca/hwloc/.libs/libmca_hwloc.a
>>>>>> ./opal/mca/hwloc/libmca_hwloc.la
>>>>>> ./opal/mca/hwloc/hwloc201
>>>>>> ./opal/mca/hwloc/hwloc201/.deps/hwloc201_component.Plo
>>>>>> ./opal/mca/hwloc/hwloc201/hwloc201_component.lo
>>>>>> ./opal/mca/hwloc/hwloc201/hwloc
>>>>>> ./opal/mca/hwloc/hwloc201/hwloc/include/hwloc
>>>>>> ./opal/mca/hwloc/hwloc201/hwloc/hwloc
>>>>>> ./opal/mca/hwloc/hwloc201/hwloc/hwloc/libhwloc_embedded.la
>>>>>> ./opal/mca/hwloc/hwloc201/hwloc/hwloc/.deps/hwloc_pci_la-topology-pci.Plo
>>>>>> ./opal/mca/hwloc/hwloc201/hwloc/hwloc/.deps/hwloc_gl_la-topology-gl.Plo
>>>>>> ./opal/mca/hwloc/hwloc201/hwloc/hwloc/.deps/hwloc_cuda_la-topology-cuda.Plo
>>>>>> ./opal/mca/hwloc/hwloc201/hwloc/hwloc/.deps/hwloc_xml_libxml_la-topology-xml-libxml.Plo
>>>>>> ./opal/mca/hwloc/hwloc201/hwloc/hwloc/.deps/hwloc_opencl_la-topology-opencl.Plo
>>>>>> ./opal/mca/hwloc/hwloc201/hwloc/hwloc/.deps/hwloc_nvml_la-topology-nvml.Plo
>>>>>> ./opal/mca/hwloc/hwloc201/hwloc/hwloc/.libs/libhwloc_embedded.la
>>>>>> ./opal/mca/hwloc/hwloc201/hwloc/hwloc/.libs/libhwloc_embedded.a
>>>>>> ./opal/mca/hwloc/hwloc201/.libs/hwloc201_component.o
>>>>>> ./opal/mca/hwloc/hwloc201/.libs/libmca_hwloc_hwloc201.la
>>>>>> ./opal/mca/hwloc/hwloc201/.libs/libmca_hwloc_hwloc201.a
>>>>>> ./opal/mca/hwloc/hwloc201/libmca_hwloc_hwloc201.la
>>>>>> ./orte/mca/rtc/hwloc
>>>>>> ./orte/mca/rtc/hwloc/rtc_hwloc.lo
>>>>>> ./orte/mca/rtc/hwloc/.deps/rtc_hwloc.Plo
>>>>>> ./orte/mca/rtc/hwloc/.deps/rtc_hwloc_component.Plo
>>>>>> ./orte/mca/rtc/hwloc/mca_rtc_hwloc.la
>>>>>> ./orte/mca/rtc/hwloc/.libs/mca_rtc_hwloc.so
>>>>>> ./orte/mca/rtc/hwloc/.libs/mca_rtc_hwloc.la
>>>>>> ./orte/mca/rtc/hwloc/.libs/rtc_hwloc.o
>>>>>> ./orte/mca/rtc/hwloc/.libs/rtc_hwloc_component.o
>>>>>> ./orte/mca/rtc/hwloc/.libs/mca_rtc_hwloc.soT
>>>>>> ./orte/mca/rtc/hwloc/.libs/mca_rtc_hwloc.lai
>>>>>> ./orte/mca/rtc/hwloc/rtc_hwloc_component.lo
>>>>>> loki openmpi-master-201809290304-73075b8-Linux.x86_64.64_gcc 112
>>>>>>
>>>>>> And some files are available in the install directory.
>>>>>>
>>>>>> loki openmpi-master_64_gcc 116 find . -name '*hwloc*'
>>>>>> ./share/openmpi/help-orte-rtc-hwloc.txt
>>>>>> ./share/openmpi/help-opal-hwloc-base.txt
>>>>>> ./lib64/openmpi/mca_rtc_hwloc.so
>>>>>> ./lib64/openmpi/mca_rtc_hwloc.la
>>>>>> loki openmpi-master_64_gcc 117
>>>>>>
>>>>>> I don't see any unavailable libraries so that the only available
>>>>>> hwloc library should work.
>>>>>>
>>>>>> loki openmpi 126 ldd -v mca_rtc_hwloc.so
>>>>>> linux-vdso.so.1 (0x00007ffd2df5b000)
>>>>>> libopen-rte.so.0 =>
>>>>>> /usr/local/openmpi-master_64_gcc/lib64/libopen-rte.so.0
>>>>>> (0x00007f082b7fb000)
>>>>>> libopen-pal.so.0 =>
>>>>>> /usr/local/openmpi-master_64_gcc/lib64/libopen-pal.so.0
>>>>>> (0x00007f082b493000)
>>>>>> libdl.so.2 => /lib64/libdl.so.2 (0x00007f082b28f000)
>>>>>> libudev.so.1 => /usr/lib64/libudev.so.1 (0x00007f082b06e000)
>>>>>> libpciaccess.so.0 => /usr/lib64/libpciaccess.so.0
>>>>>> (0x00007f082ae64000)
>>>>>> librt.so.1 => /lib64/librt.so.1 (0x00007f082ac5c000)
>>>>>> libm.so.6 => /lib64/libm.so.6 (0x00007f082a95f000)
>>>>>> libutil.so.1 => /lib64/libutil.so.1 (0x00007f082a75c000)
>>>>>> libz.so.1 => /lib64/libz.so.1 (0x00007f082a546000)
>>>>>> libpthread.so.0 => /lib64/libpthread.so.0 (0x00007f082a329000)
>>>>>> libc.so.6 => /lib64/libc.so.6 (0x00007f0829f84000)
>>>>>> libgcc_s.so.1 => /usr/local/gcc-8.2.0/lib64/libgcc_s.so.1
>>>>>> (0x00007f0829d6c000)
>>>>>> /lib64/ld-linux-x86-64.so.2 (0x00007f082bd24000)
>>>>>> libselinux.so.1 => /lib64/libselinux.so.1 (0x00007f0829b46000)
>>>>>> libcap.so.2 => /lib64/libcap.so.2 (0x00007f0829941000)
>>>>>> libresolv.so.2 => /lib64/libresolv.so.2 (0x00007f082972a000)
>>>>>> libpcre.so.1 => /usr/lib64/libpcre.so.1 (0x00007f08294bb000)
>>>>>>
>>>>>> Version information:
>>>>>> ./mca_rtc_hwloc.so:
>>>>>> libpthread.so.0 (GLIBC_2.2.5) => /lib64/libpthread.so.0
>>>>>> libc.so.6 (GLIBC_2.2.5) => /lib64/libc.so.6
>>>>>> /usr/local/openmpi-master_64_gcc/lib64/libopen-rte.so.0:
>>>>>> libz.so.1 (ZLIB_1.2.0) => /lib64/libz.so.1
>>>>>> libpthread.so.0 (GLIBC_2.3.2) => /lib64/libpthread.so.0
>>>>>> libpthread.so.0 (GLIBC_2.2.5) => /lib64/libpthread.so.0
>>>>>> libc.so.6 (GLIBC_2.3) => /lib64/libc.so.6
>>>>>> libc.so.6 (GLIBC_2.14) => /lib64/libc.so.6
>>>>>> libc.so.6 (GLIBC_2.2.5) => /lib64/libc.so.6
>>>>>> /usr/local/openmpi-master_64_gcc/lib64/libopen-pal.so.0:
>>>>>> librt.so.1 (GLIBC_2.2.5) => /lib64/librt.so.1
>>>>>> libgcc_s.so.1 (GCC_3.0) =>
>>>>>> /usr/local/gcc-8.2.0/lib64/libgcc_s.so.1
>>>>>> libgcc_s.so.1 (GCC_3.3.1) =>
>>>>>> /usr/local/gcc-8.2.0/lib64/libgcc_s.so.1
>>>>>> libdl.so.2 (GLIBC_2.2.5) => /lib64/libdl.so.2
>>>>>> libutil.so.1 (GLIBC_2.2.5) => /lib64/libutil.so.1
>>>>>> libudev.so.1 (LIBUDEV_183) => /usr/lib64/libudev.so.1
>>>>>> libm.so.6 (GLIBC_2.2.5) => /lib64/libm.so.6
>>>>>> libpthread.so.0 (GLIBC_2.3.4) => /lib64/libpthread.so.0
>>>>>> libpthread.so.0 (GLIBC_2.3.2) => /lib64/libpthread.so.0
>>>>>> libpthread.so.0 (GLIBC_2.2.5) => /lib64/libpthread.so.0
>>>>>> libc.so.6 (GLIBC_2.6) => /lib64/libc.so.6
>>>>>> libc.so.6 (GLIBC_2.7) => /lib64/libc.so.6
>>>>>> libc.so.6 (GLIBC_2.14) => /lib64/libc.so.6
>>>>>> libc.so.6 (GLIBC_2.3) => /lib64/libc.so.6
>>>>>> libc.so.6 (GLIBC_2.3.2) => /lib64/libc.so.6
>>>>>> libc.so.6 (GLIBC_2.3.4) => /lib64/libc.so.6
>>>>>> libc.so.6 (GLIBC_2.4) => /lib64/libc.so.6
>>>>>> libc.so.6 (GLIBC_2.2.5) => /lib64/libc.so.6
>>>>>> /lib64/libdl.so.2:
>>>>>> ld-linux-x86-64.so.2 (GLIBC_PRIVATE) =>
>>>>>> /lib64/ld-linux-x86-64.so.2
>>>>>> libc.so.6 (GLIBC_PRIVATE) => /lib64/libc.so.6
>>>>>> libc.so.6 (GLIBC_2.2.5) => /lib64/libc.so.6
>>>>>> /usr/lib64/libudev.so.1:
>>>>>> librt.so.1 (GLIBC_2.2.5) => /lib64/librt.so.1
>>>>>> ld-linux-x86-64.so.2 (GLIBC_2.3) =>
>>>>>> /lib64/ld-linux-x86-64.so.2
>>>>>> libpthread.so.0 (GLIBC_2.2.5) => /lib64/libpthread.so.0
>>>>>> libc.so.6 (GLIBC_2.3) => /lib64/libc.so.6
>>>>>> libc.so.6 (GLIBC_2.9) => /lib64/libc.so.6
>>>>>> libc.so.6 (GLIBC_2.16) => /lib64/libc.so.6
>>>>>> libc.so.6 (GLIBC_2.8) => /lib64/libc.so.6
>>>>>> libc.so.6 (GLIBC_2.4) => /lib64/libc.so.6
>>>>>> libc.so.6 (GLIBC_2.14) => /lib64/libc.so.6
>>>>>> libc.so.6 (GLIBC_2.3.4) => /lib64/libc.so.6
>>>>>> libc.so.6 (GLIBC_2.2.5) => /lib64/libc.so.6
>>>>>> /usr/lib64/libpciaccess.so.0:
>>>>>> libc.so.6 (GLIBC_2.3) => /lib64/libc.so.6
>>>>>> libc.so.6 (GLIBC_2.4) => /lib64/libc.so.6
>>>>>> libc.so.6 (GLIBC_2.7) => /lib64/libc.so.6
>>>>>> libc.so.6 (GLIBC_2.2.5) => /lib64/libc.so.6
>>>>>> libc.so.6 (GLIBC_2.3.4) => /lib64/libc.so.6
>>>>>> /lib64/librt.so.1:
>>>>>> libpthread.so.0 (GLIBC_2.3.2) => /lib64/libpthread.so.0
>>>>>> libpthread.so.0 (GLIBC_PRIVATE) => /lib64/libpthread.so.0
>>>>>> libpthread.so.0 (GLIBC_2.2.5) => /lib64/libpthread.so.0
>>>>>> libc.so.6 (GLIBC_2.14) => /lib64/libc.so.6
>>>>>> libc.so.6 (GLIBC_2.3.2) => /lib64/libc.so.6
>>>>>> libc.so.6 (GLIBC_2.2.5) => /lib64/libc.so.6
>>>>>> libc.so.6 (GLIBC_PRIVATE) => /lib64/libc.so.6
>>>>>> /lib64/libm.so.6:
>>>>>> libc.so.6 (GLIBC_PRIVATE) => /lib64/libc.so.6
>>>>>> libc.so.6 (GLIBC_2.2.5) => /lib64/libc.so.6
>>>>>> /lib64/libutil.so.1:
>>>>>> libc.so.6 (GLIBC_PRIVATE) => /lib64/libc.so.6
>>>>>> libc.so.6 (GLIBC_2.2.5) => /lib64/libc.so.6
>>>>>> /lib64/libz.so.1:
>>>>>> libc.so.6 (GLIBC_2.14) => /lib64/libc.so.6
>>>>>> libc.so.6 (GLIBC_2.2.5) => /lib64/libc.so.6
>>>>>> libc.so.6 (GLIBC_2.3.4) => /lib64/libc.so.6
>>>>>> /lib64/libpthread.so.0:
>>>>>> ld-linux-x86-64.so.2 (GLIBC_2.2.5) =>
>>>>>> /lib64/ld-linux-x86-64.so.2
>>>>>> ld-linux-x86-64.so.2 (GLIBC_PRIVATE) =>
>>>>>> /lib64/ld-linux-x86-64.so.2
>>>>>> libc.so.6 (GLIBC_2.14) => /lib64/libc.so.6
>>>>>> libc.so.6 (GLIBC_2.3.2) => /lib64/libc.so.6
>>>>>> libc.so.6 (GLIBC_2.2.5) => /lib64/libc.so.6
>>>>>> libc.so.6 (GLIBC_PRIVATE) => /lib64/libc.so.6
>>>>>> /lib64/libc.so.6:
>>>>>> ld-linux-x86-64.so.2 (GLIBC_2.3) =>
>>>>>> /lib64/ld-linux-x86-64.so.2
>>>>>> ld-linux-x86-64.so.2 (GLIBC_PRIVATE) =>
>>>>>> /lib64/ld-linux-x86-64.so.2
>>>>>> /usr/local/gcc-8.2.0/lib64/libgcc_s.so.1:
>>>>>> libc.so.6 (GLIBC_2.14) => /lib64/libc.so.6
>>>>>> libc.so.6 (GLIBC_2.2.5) => /lib64/libc.so.6
>>>>>> /lib64/libselinux.so.1:
>>>>>> libdl.so.2 (GLIBC_2.2.5) => /lib64/libdl.so.2
>>>>>> ld-linux-x86-64.so.2 (GLIBC_2.3) =>
>>>>>> /lib64/ld-linux-x86-64.so.2
>>>>>> libc.so.6 (GLIBC_2.14) => /lib64/libc.so.6
>>>>>> libc.so.6 (GLIBC_2.8) => /lib64/libc.so.6
>>>>>> libc.so.6 (GLIBC_2.4) => /lib64/libc.so.6
>>>>>> libc.so.6 (GLIBC_2.7) => /lib64/libc.so.6
>>>>>> libc.so.6 (GLIBC_2.3) => /lib64/libc.so.6
>>>>>> libc.so.6 (GLIBC_2.2.5) => /lib64/libc.so.6
>>>>>> libc.so.6 (GLIBC_2.3.4) => /lib64/libc.so.6
>>>>>> /lib64/libcap.so.2:
>>>>>> libc.so.6 (GLIBC_2.3.4) => /lib64/libc.so.6
>>>>>> libc.so.6 (GLIBC_2.8) => /lib64/libc.so.6
>>>>>> libc.so.6 (GLIBC_2.4) => /lib64/libc.so.6
>>>>>> libc.so.6 (GLIBC_2.3) => /lib64/libc.so.6
>>>>>> libc.so.6 (GLIBC_2.2.5) => /lib64/libc.so.6
>>>>>> /lib64/libresolv.so.2:
>>>>>> libc.so.6 (GLIBC_2.14) => /lib64/libc.so.6
>>>>>> libc.so.6 (GLIBC_2.4) => /lib64/libc.so.6
>>>>>> libc.so.6 (GLIBC_PRIVATE) => /lib64/libc.so.6
>>>>>> libc.so.6 (GLIBC_2.2.5) => /lib64/libc.so.6
>>>>>> libc.so.6 (GLIBC_2.3) => /lib64/libc.so.6
>>>>>> /usr/lib64/libpcre.so.1:
>>>>>> libpthread.so.0 (GLIBC_2.2.5) => /lib64/libpthread.so.0
>>>>>> libc.so.6 (GLIBC_2.14) => /lib64/libc.so.6
>>>>>> libc.so.6 (GLIBC_2.3.4) => /lib64/libc.so.6
>>>>>> libc.so.6 (GLIBC_2.4) => /lib64/libc.so.6
>>>>>> libc.so.6 (GLIBC_2.2.5) => /lib64/libc.so.6
>>>>>> libc.so.6 (GLIBC_2.3) => /lib64/libc.so.6
>>>>>> loki openmpi 127
>>>>>>
>>>>>> Hopefully that helps to find the problem. I will answer your emails
>>>>>> tommorrow if you need anything else.
>>>>>>
>>>>>>
>>>>>> Best regards
>>>>>>
>>>>>> Siegmar
>>>>>>
>>>>>>
>>>>>> Am 02.10.2018 um 19:48 schrieb Ralph H Castain:
>>>>>>> So the problem is here when configuring the internal PMIx code:
>>>>>>> configure:3383: === HWLOC
>>>>>>> configure:36189: checking for hwloc in
>>>>>>> configure:36201: result: Could not find internal/lib or internal/lib64
>>>>>>> configure:36203: error: Can not continue
>>>>>>> Can you confirm that HWLOC built? I believe we require it, but perhaps
>>>>>>> something is different about this environment.
>>>>>>>> On Oct 2, 2018, at 6:36 AM, Ralph H Castain <[email protected]> wrote:
>>>>>>>>
>>>>>>>> Looks like PMIx failed to build - can you send the config.log?
>>>>>>>>
>>>>>>>>> On Oct 2, 2018, at 12:00 AM, Siegmar Gross
>>>>>>>>> <[email protected]> wrote:
>>>>>>>>>
>>>>>>>>> Hi,
>>>>>>>>>
>>>>>>>>> yesterday I've installed openmpi-v4.0.x-201809290241-a7e275c and
>>>>>>>>> openmpi-master-201805080348-b39bbfb on my "SUSE Linux Enterprise
>>>>>>>>> Server
>>>>>>>>> 12.3 (x86_64)" with Sun C 5.15, gcc 6.4.0, Intel icc 18.0.3, and
>>>>>>>>> Portland
>>>>>>>>> Group pgcc 18.4-0. Unfortunately, I get the following error for all
>>>>>>>>> seven
>>>>>>>>> installed versions (Sun C couldn't built master as I mentioned in
>>>>>>>>> another
>>>>>>>>> email).
>>>>>>>>>
>>>>>>>>>
>>>>>>>>> loki hello_1 118 mpiexec -np 4 --host loki:2,nfs2:2 hello_1_mpi
>>>>>>>>> [loki:11423] [[45859,0],0] ORTE_ERROR_LOG: Not found in file
>>>>>>>>> ../../../../../openmpi-v4.0.x-201809290241-a7e275c/orte/mca/ess/hnp/ess_hnp_module.c
>>>>>>>>> at line 321
>>>>>>>>> --------------------------------------------------------------------------
>>>>>>>>> It looks like orte_init failed for some reason; your parallel process
>>>>>>>>> is
>>>>>>>>> likely to abort. There are many reasons that a parallel process can
>>>>>>>>> fail during orte_init; some of which are due to configuration or
>>>>>>>>> environment problems. This failure appears to be an internal failure;
>>>>>>>>> here's some additional information (which may only be relevant to an
>>>>>>>>> Open MPI developer):
>>>>>>>>>
>>>>>>>>> opal_pmix_base_select failed
>>>>>>>>> --> Returned value Not found (-13) instead of ORTE_SUCCESS
>>>>>>>>> --------------------------------------------------------------------------
>>>>>>>>> loki hello_1 119
>>>>>>>>>
>>>>>>>>>
>>>>>>>>>
>>>>>>>>> I would be grateful, if somebody can fix the problem. Do you need
>>>>>>>>> anything
>>>>>>>>> else? Thank you very much for any help in advance.
>>>>>>>>>
>>>>>>>>>
>>>>>>>>> Kind regards
>>>>>>>>>
>>>>>>>>> Siegmar
>>>>>>>>> _______________________________________________
>>>>>>>>> users mailing list
>>>>>>>>> [email protected]
>>>>>>>>> https://lists.open-mpi.org/mailman/listinfo/users
>>>>>>>>
>>>>>>>> _______________________________________________
>>>>>>>> users mailing list
>>>>>>>> [email protected]
>>>>>>>> https://lists.open-mpi.org/mailman/listinfo/users
>>>>>>> _______________________________________________
>>>>>>> users mailing list
>>>>>>> [email protected]
>>>>>>> https://lists.open-mpi.org/mailman/listinfo/users
>>>>>
>>>>> _______________________________________________
>>>>> users mailing list
>>>>> [email protected]
>>>>> https://lists.open-mpi.org/mailman/listinfo/users
>>>>
>>>>
>>>> --
>>>> Jeff Squyres
>>>> [email protected]
>>>>
>>>> _______________________________________________
>>>> users mailing list
>>>> [email protected]
>>>> https://lists.open-mpi.org/mailman/listinfo/users
>>> _______________________________________________
>>> users mailing list
>>> [email protected]
>>> https://lists.open-mpi.org/mailman/listinfo/users
>> _______________________________________________
>> users mailing list
>> [email protected]
>> https://lists.open-mpi.org/mailman/listinfo/users
>
> _______________________________________________
> users mailing list
> [email protected]
> https://lists.open-mpi.org/mailman/listinfo/users
--
Jeff Squyres
[email protected]
_______________________________________________
users mailing list
[email protected]
https://lists.open-mpi.org/mailman/listinfo/users
