So the OpenMPI version on Arch Linux can't be made operational? On Thu, 25 Feb 2021, 15:43 LINUS FERNANDES, <linus.fernan...@gmail.com> wrote:
> Nope. None of the commands exist. So no, I'd say. > > On Thu, 25 Feb 2021, 15:11 Gilles Gouaillardet via users, < > users@lists.open-mpi.org> wrote: > >> https://www.letmegooglethat.com/?q=how+to+check+if+selinux+is+enabled&l=1 >> >> On Thu, Feb 25, 2021 at 6:15 PM LINUS FERNANDES via users >> <users@lists.open-mpi.org> wrote: >> > >> > How do I know that? I'm not a Linux expert. I simply want to get >> OpenMPI running on Arch Linux so that I can test out their Java wrappers >> which I obviously can't on Termux since it doesn't support OpenJDK. >> > >> > On Thu, 25 Feb 2021, 13:37 Gilles Gouaillardet via users, < >> users@lists.open-mpi.org> wrote: >> >> >> >> Is SELinux running on ArchLinux under Termux? >> >> >> >> On 2/25/2021 4:36 PM, LINUS FERNANDES via users wrote: >> >> > Yes, I did not receive this in my inbox since I set to receive >> digest. >> >> > >> >> > -------- >> >> > ifconfig output: >> >> > >> >> > dummy0: flags=195<UP,BROADCAST,RUNNING,NOARP> mtu 1500 >> >> > inet6 fe80::38a0:1bff:fe81:d4f5 prefixlen 64 scopeid >> 0x20<link> >> >> > unspec 00-00-00-00-00-00-00-00-00-00-00-00-00-00-00-00 >> >> > txqueuelen 0 (UNSPEC) >> >> > RX packets 0 bytes 0 (0.0 B) >> >> > RX errors 0 dropped 0 overruns 0 frame 0 >> >> > TX packets 3 bytes 210 (210.0 B) >> >> > TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0 >> >> > >> >> > lo: flags=73<UP,LOOPBACK,RUNNING> mtu 65536 >> >> > inet 127.0.0.1 netmask 255.0.0.0 >> >> > inet6 ::1 prefixlen 128 scopeid 0x10<host> >> >> > unspec 00-00-00-00-00-00-00-00-00-00-00-00-00-00-00-00 >> >> > txqueuelen 0 (UNSPEC) >> >> > RX packets 17247 bytes 2062939 (1.9 MiB) >> >> > RX errors 0 dropped 0 overruns 0 frame 0 >> >> > TX packets 17247 bytes 2062939 (1.9 MiB) >> >> > TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0 >> >> > >> >> > p2p0: flags=4099<UP,BROADCAST,MULTICAST> mtu 1500 >> >> > unspec 00-00-00-00-00-00-00-00-00-00-00-00-00-00-00-00 >> >> > txqueuelen 1000 (UNSPEC) >> >> > RX packets 0 bytes 0 (0.0 B) >> >> > RX errors 0 dropped 0 overruns 0 frame 0 >> >> > TX packets 0 bytes 0 (0.0 B) >> >> > TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0 >> >> > >> >> > rmnet_data0: flags=65<UP,RUNNING> mtu 1500 >> >> > inet 10.140.58.138 netmask 255.255.255.252 >> >> > inet6 fe80::93a5:ad99:4660:adc4 prefixlen 64 scopeid >> 0x20<link> >> >> > unspec 00-00-00-00-00-00-00-00-00-00-00-00-00-00-00-00 >> >> > txqueuelen 1000 (UNSPEC) >> >> > RX packets 416796 bytes 376287723 (358.8 MiB) >> >> > RX errors 0 dropped 0 overruns 0 frame 0 >> >> > TX packets 318293 bytes 69933666 (66.6 MiB) >> >> > TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0 >> >> > >> >> > rmnet_data7: flags=65<UP,RUNNING> mtu 2000 >> >> > inet6 fe80::a6b7:c914:44de:639 prefixlen 64 scopeid >> 0x20<link> >> >> > unspec 00-00-00-00-00-00-00-00-00-00-00-00-00-00-00-00 >> >> > txqueuelen 1000 (UNSPEC) >> >> > RX packets 8 bytes 620 (620.0 B) >> >> > RX errors 0 dropped 0 overruns 0 frame 0 >> >> > TX packets 10 bytes 752 (752.0 B) >> >> > TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0 >> >> > >> >> > rmnet_ipa0: flags=65<UP,RUNNING> mtu 2000 >> >> > unspec 00-00-00-00-00-00-00-00-00-00-00-00-00-00-00-00 >> >> > txqueuelen 1000 (UNSPEC) >> >> > RX packets 222785 bytes 381290027 (363.6 MiB) >> >> > RX errors 0 dropped 0 overruns 0 frame 0 >> >> > TX packets 318303 bytes 69934418 (66.6 MiB) >> >> > TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0 >> >> > >> >> > wlan0: flags=4099<UP,BROADCAST,MULTICAST> mtu 1500 >> >> > unspec 00-00-00-00-00-00-00-00-00-00-00-00-00-00-00-00 >> >> > txqueuelen 1000 (UNSPEC) >> >> > RX packets 650238 bytes 739939859 (705.6 MiB) >> >> > RX errors 0 dropped 0 overruns 0 frame 0 >> >> > TX packets 408284 bytes 63728624 (60.7 MiB) >> >> > TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0 >> >> > >> >> > >> >> > ----- >> >> > ip addr output: >> >> > >> >> > 1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN >> >> > group default >> >> > link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00 >> >> > inet 127.0.0.1/8 <http://127.0.0.1/8> scope host lo >> >> > valid_lft forever preferred_lft forever >> >> > inet6 ::1/128 scope host >> >> > valid_lft forever preferred_lft forever >> >> > 2: dummy0: <BROADCAST,NOARP,UP,LOWER_UP> mtu 1500 qdisc noqueue state >> >> > UNKNOWN group default >> >> > link/ether 3a:a0:1b:81:d4:f5 brd ff:ff:ff:ff:ff:ff >> >> > inet6 fe80::38a0:1bff:fe81:d4f5/64 scope link >> >> > valid_lft forever preferred_lft forever >> >> > 3: sit0@NONE: <NOARP> mtu 1480 qdisc noop state DOWN group default >> >> > link/sit 0.0.0.0 brd 0.0.0.0 >> >> > 4: rmnet_ipa0: <UP,LOWER_UP> mtu 2000 qdisc pfifo_fast state UNKNOWN >> >> > group default qlen 1000 >> >> > link/[530] >> >> > 5: rmnet_data0: <UP,LOWER_UP> mtu 1500 qdisc htb state UNKNOWN group >> >> > default qlen 1000 >> >> > link/[530] >> >> > inet 10.140.58.138/30 <http://10.140.58.138/30> scope global >> >> > rmnet_data0 >> >> > valid_lft forever preferred_lft forever >> >> > inet6 fe80::93a5:ad99:4660:adc4/64 scope link >> >> > valid_lft forever preferred_lft forever >> >> > 6: rmnet_data1: <> mtu 1500 qdisc noop state DOWN group default qlen >> 1000 >> >> > link/[530] >> >> > 7: rmnet_data2: <> mtu 1500 qdisc noop state DOWN group default qlen >> 1000 >> >> > link/[530] >> >> > 8: rmnet_data3: <> mtu 1500 qdisc noop state DOWN group default qlen >> 1000 >> >> > link/[530] >> >> > 9: rmnet_data4: <> mtu 1500 qdisc noop state DOWN group default qlen >> 1000 >> >> > link/[530] >> >> > 10: rmnet_data5: <> mtu 1500 qdisc noop state DOWN group default >> qlen 1000 >> >> > link/[530] >> >> > 11: rmnet_data6: <> mtu 1500 qdisc noop state DOWN group default >> qlen 1000 >> >> > link/[530] >> >> > 12: rmnet_data7: <UP,LOWER_UP> mtu 2000 qdisc htb state UNKNOWN group >> >> > default qlen 1000 >> >> > link/[530] >> >> > inet6 fe80::a6b7:c914:44de:639/64 scope link >> >> > valid_lft forever preferred_lft forever >> >> > 13: r_rmnet_data0: <> mtu 1500 qdisc noop state DOWN group default >> >> > qlen 1000 >> >> > link/[530] >> >> > 14: r_rmnet_data1: <> mtu 1500 qdisc noop state DOWN group default >> >> > qlen 1000 >> >> > link/[530] >> >> > 15: r_rmnet_data2: <> mtu 1500 qdisc noop state DOWN group default >> >> > qlen 1000 >> >> > link/[530] >> >> > 16: r_rmnet_data3: <> mtu 1500 qdisc noop state DOWN group default >> >> > qlen 1000 >> >> > link/[530] >> >> > 17: r_rmnet_data4: <> mtu 1500 qdisc noop state DOWN group default >> >> > qlen 1000 >> >> > link/[530] >> >> > 18: r_rmnet_data5: <> mtu 1500 qdisc noop state DOWN group default >> >> > qlen 1000 >> >> > link/[530] >> >> > 19: r_rmnet_data6: <> mtu 1500 qdisc noop state DOWN group default >> >> > qlen 1000 >> >> > link/[530] >> >> > 20: r_rmnet_data7: <> mtu 1500 qdisc noop state DOWN group default >> >> > qlen 1000 >> >> > link/[530] >> >> > 21: r_rmnet_data8: <> mtu 1500 qdisc noop state DOWN group default >> >> > qlen 1000 >> >> > link/[530] >> >> > 22: wlan0: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc mq >> state >> >> > DOWN group default qlen 1000 >> >> > link/ether 04:d1:3a:07:70:4b brd ff:ff:ff:ff:ff:ff >> >> > 23: p2p0: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc mq state >> >> > DOWN group default qlen 1000 >> >> > link/ether 06:d1:3a:07:70:4b brd ff:ff:ff:ff:ff:ff >> >> > >> >> > >> >> > This is on Arch Linux on Termux. >> >> > >> >> > Similar output on Termux available. >> >> > >> >> > >> >
