Hi Suresh/Jakub, I am also facing same issue. I wonder if this is
related to "contrail-nodemgr" not running on compute node ?I mean, that is my
read of the situation after going through archives of mailing list.In my case,
"contrail-nodemgr" was not running on compute node and I am still not able to
make it run successfully. Log file has bunch of "import module" errors.
Thanks,Ravindra
On Sunday, June 11, 2017 12:55 PM, Jakub Pavlik <[email protected]>
wrote:
Hi Suresh,
1) please check that all your virtual routers are registered in UI.
2) try on the compute call opencontrail-vrouter-netns if it is executable. I
saw similar issue in the past.
Jakub
On Sun, Jun 11, 2017 at 12:02 PM, Suresh Kumar S via Users
<[email protected]> wrote:
Hi,
SNAT service instance is not working in my setup. .
In my setup (Contrail 3.2, + openstack Mitaka),
- VM Creation,associating floating ip is working fine. Able to SSH to VM via
floating IP and reaching the INTERNET works fine.
Next, i tried to set up the SNAT, Service Instance as mentioned in the link
(but used neutron APIs instead of contrail)
https://www.juniper.net/ documentation/en_US/contrail3.
2/topics/task/configuration/ snat-vnc.html
In the svcmonitor log shows service instance is created. Also I could see the
service instance in the introspect of svc-monitor also .
SNAT Networks, ports are created. I could able to see in the neutron port-list
output.
But no network namespaces created in compute node.
For further debugging, i see the following error in the svc monitor logs.
Also, i see the below error in the svc monitor logs,
06/10/2017 02:33:47 PM [contrail-svc-monitor]: __default__ [SYS_ERR]:
SvcMonitorLog: vrouter not found for vm e6d8e241-9e3c-4758-a5a2- bb034fdb4380
06/10/2017 02:33:47 PM [contrail-svc-monitor]: __default__ [SYS_ERR]:
SvcMonitorLog: vrouter not found for vm 3668b94a-d19a-4dae-a810- d4b4d45a7a43
06/10/2017 02:33:47 PM [contrail-svc-monitor]: __default__ [SYS_ERR]:
SvcMonitorLog: No vrouter available for VM default-domain__demo__snat_
3cade500-9942-4e54-89af- 5c5bd3089645_0fc5210f-bfe9- 4b8f-9487-9567e25d15c6__1
Question1:
Any pointers from the above logs, for further debugging.?
Question2:
Do i need to start the contrail-vrouter-netns daemon , as mentioned in the
below.
https://github.com/Juniper/ contrail-controller/tree/R3.2/
src/vnsw/opencontrail-vrouter- netns
I have installed vrouter-netns package, and didnt start the
"netns-daemon-start" daemon. Is it still applicable?
Please confirm.
Thanks
suresh
______________________________ _________________
Users mailing list
[email protected]
http://lists.opencontrail.org/ mailman/listinfo/users_lists. opencontrail.org
--
Jakub Pavlik
+420 602 177 027
[email protected]
_______________________________________________
Users mailing list
[email protected]
http://lists.opencontrail.org/mailman/listinfo/users_lists.opencontrail.org
_______________________________________________
Users mailing list
[email protected]
http://lists.opencontrail.org/mailman/listinfo/users_lists.opencontrail.org
