Dear members, I have set up a OmniOS box on a HP n54l. I have one issue left for now - configuring acpupsd to drive a CyberPower CP1500EPFCLCD unit. Here is a recap of what I did:
- Remove HID, replace by UGEN using following link: http://www.packetmischief.ca/2013/01/01/installing-apcupsd-with-usb-support-on-omnios/ - Install pkgutil from http://www.opencsw.org/ - Install CSWapcupsd from http://www.opencsw.org/ - Configured /etc/opt/csw/apcsupsd/apcsupsd.conf to make it work with USB (I have attached the file) - Running apctest failed with a cryptic error message: 2014-07-06 19:32:36 apctest 3.14.10 (13 September 2011) sun Checking configuration ... Attached to driver: usb sharenet.type = Network & ShareUPS Disabled cable.type = USB Cable mode.type = USB UPS Driver Setting up the port ... apctest FATAL ERROR in generic-usb.c at line 674 Cannot find UPS device -- For a link to detailed USB trouble shooting information, please see <http://www.apcupsd.com/support.html>. apctest error termination completed - I am attaching apcupsd.trace file - Here's a copy of log file when i unplug/plug the usb cable: Jul 6 19:01:02 OmniOS genunix: [ID 408114 kern.info] /pci@0,0/pci103c,1609@12/input@5 (ugen0) removed Jul 6 19:01:42 OmniOS usba: [ID 912658 kern.info] USB 2.0 device (usb764,501) operating at full speed (USB 1.x) on USB 1.10 root hub: input@5, ugen0 at bus address 2 Jul 6 19:01:42 OmniOS usba: [ID 349649 kern.info] CP1500EPFCLCD RJB103.551 CPS Jul 6 19:01:42 OmniOS genunix: [ID 936769 kern.info] ugen0 is /pci@0,0/pci103c,1609@12/input@5 Jul 6 19:01:42 OmniOS genunix: [ID 408114 kern.info] /pci@0,0/pci103c,1609@12/input@5 (ugen0) online - I'm kind of lost for now..... Thank you for any help you could provide, Jean-Pierre
apcupsd.conf
Description: Binary data
apcupsd.trace
Description: Binary data
