Hello all,
I have been running Xen on our virtual servers here for a while
now. Recently we have added some machines and it has come up that we
need to redo our virtual servers to better utilize them. The main thing
the higher-ups are requesting is a GUI to manage the environment. So I
asked on the xen-users list and they pointed me to OpenNebula. So far I
like what I see. Support for Xen, KVM, and VMWare is a plus for future
expansion if needed.
I have a few questions though. Below is our current machine and SAN
specs. I want to fully utilize all of them and have some level of
failover, either manual or automatic, for when I need to bring a machine
down for maintenance. Here's the specs:
xen-test: Testbed machine:Dell 2900; 8x 300GB in raid6, 8GB ram, 1x
Intel 5405 quad core 2.0Ghz, 2x gigabit nics
xen1: Production unit: Dell T710; 8x 2TB in raid6, 24GB ram, 2x Intel
5504 quad core 2.0Ghz, 4x gigabit nics
xen2: Production unit: Dell R610; 3x 160GB in raid5, 32GB ram, 2x Intel
5506 quad core 2.13Ghz, 4x gigabit nics
SAN: Dell MD3200i; 12x 2TB in raid6, dual controllers.
Currently all machines have their network cards bonded and vlans passed
over the trunked interface as we have approximately 20 vlans we use.
This should be fairly simple to do with OpenNebula correct?
I have a mix of local and network storage. Should OpenNebula be able to
handle both local and SAN storage?
All raid is hardware based. With the current setup what is the best way
to set it up for best fault tolerance/speed/space?
What is the best OS to start with? We currently use Centos 5.5 on all 3
nodes but would prefer Fedora or similar. Debian would be doable also.
Would I be able to import the existing virtual machines that are running
into OpenNebula?
I know that one major performance hit is the raid6 and it would be
better to do a raid10. At the time xen1 and the SAN were purchased they
were all we had so fault tolerance with maximum space was top priority
over speed. We may look at redoing this soon.
We are a small state government agency with little to no IT budget so I
have to work with what I have. Please keep that in mind before
suggesting "why not buy such and such...". Thanks in advance for the input.
--
Donny B.
_______________________________________________
Users mailing list
Users@lists.opennebula.org
http://lists.opennebula.org/listinfo.cgi/users-opennebula.org
