Hi there, Looks like you are using esx 5.1, which is not yet supported [1]
Regards [1] http://opennebula.org/documentation:rel3.8:evmwareg#considerations_limitations -- Carlos Martín, MSc Project Engineer OpenNebula - The Open-source Solution for Data Center Virtualization www.OpenNebula.org | cmar...@opennebula.org | @OpenNebula<http://twitter.com/opennebula><cmar...@opennebula.org> On Fri, Dec 28, 2012 at 5:13 PM, thái bình <thaibin...@yahoo.com> wrote: > The VM template like this: > > VIRTUAL MACHINE TEMPLATE > CPU="1" > DISK=[ > CLONE="YES", > CLUSTER_ID="101", > DATASTORE="default", > DATASTORE_ID="1", > DEV_PREFIX="hd", > DISK_ID="0", > IMAGE="ttylinux - VMware", > IMAGE_ID="3", > IMAGE_UNAME="oneadmin", > READONLY="NO", > SAVE="NO", > SOURCE="/var/lib/one/datastores/1/5ac3057f1db59bd2e3424f89aee720b4", > TARGET="hda", > TM_MAD="shared", > TYPE="FILE" ] > GRAPHICS=[ > LISTEN="0.0.0.0", > PORT="5909", > TYPE="vnc" ] > MEMORY="256" > NAME="test2" > NIC=[ > BRIDGE="br0", > IP="172.16.100.202", > MAC="02:00:ac:10:64:ca", > NETWORK="cloud", > NETWORK_ID="0", > NETWORK_UNAME="oneadmin", > VLAN="NO" ] > REQUIREMENTS="CLUSTER_ID = 101" > TEMPLATE_ID="1" > VMID="9" > > The generated deployment.0 contains a an erroneous path to the disk.vmdk > path > > <domain type='vmware'> > <name>one-9</name> > <memory>262144</memory> > <os> > <type arch='i686'>hvm</type> > </os> > <devices> > <disk type='file' device='disk'> > <source file='[0] 9/disk.0/disk.vmdk'/> > <target dev='hda'/> > </disk> > <interface type='bridge'> > <source bridge='br0'/> > <mac address='02:00:ac:10:64:ca'/> > </interface> > <graphics type='vnc' listen='0.0.0.0' port='5909'/> > </devices> > </domain> > > The erroneous message out put when creating VM lik this > > Fri Dec 28 16:56:01 2012 [DiM][I]: New VM state is PENDING > Fri Dec 28 16:56:07 2012 [DiM][I]: New VM state is ACTIVE. > Fri Dec 28 16:56:07 2012 [LCM][I]: New VM state is PROLOG. > Fri Dec 28 16:56:07 2012 [VM][I]: Virtual Machine has no context > Fri Dec 28 16:56:23 2012 [TM][I]: clone: Cloning > /vmfs/volumes/1/5ac3057f1db59bd2e3424f89aee720b4 in > esxi02:/vmfs/volumes/0/9/disk.0 > Fri Dec 28 16:56:23 2012 [TM][I]: ExitCode: 0 > Fri Dec 28 16:56:23 2012 [LCM][I]: New VM state is BOOT > Fri Dec 28 16:56:23 2012 [VMM][I]: Generating deployment file: > /var/lib/one/9/deployment.1 > Fri Dec 28 16:56:23 2012 [VMM][I]: ExitCode: 0 > Fri Dec 28 16:56:23 2012 [VMM][I]: Successfully execute network driver > operation: pre. > Fri Dec 28 16:56:36 2012 [VMM][I]: Command execution fail: > /var/lib/one/remotes/vmm/vmware/deploy /var/lib/one/9/deployment.1 esxi02 9 > esxi02 > Fri Dec 28 16:56:36 2012 [VMM][D]: deploy: Successfully defined domain > one-9.Fri Dec 28 16:56:36 2012 [VMM][E]: deploy: Error executing: virsh -c > 'esx://esxi02/?no_verify=1&auto_answer=1' start one-9 err: ExitCode: 1 > Fri Dec 28 16:56:36 2012 [VMM][I]: out: > Fri Dec 28 16:56:36 2012 [VMM][I]: 2012-12-28 15:56:32.384+0000: 28517: info > : libvirt version: 0.9.10, package: 21.el6_3.5 (CentOS BuildSystem > <http://bugs.centos.org>, 2012-10-11-13:57:12, c6b9.bsys.dev.centos.org) > Fri Dec 28 16:56:36 2012 [VMM][I]: 2012-12-28 15:56:32.384+0000: 28517: > warning : esxVI_Context_Connect:687 : Found untested VI API major/minor > version '5.1' > Fri Dec 28 16:56:36 2012 [VMM][I]: 2012-12-28 15:56:32.384+0000: 28517: > warning : esxVI_Context_Connect:723 : Found untested ESX major/minor version > '5.1.0' > Fri Dec 28 16:56:36 2012 [VMM][I]: error: Failed to start domain one-9 > Fri Dec 28 16:56:36 2012 [VMM][I]: error: internal error Could not start > domain: FileNotFound - File [0] 9/disk.0/disk.vmdk was not found > Fri Dec 28 16:56:36 2012 [VMM][I]: > Fri Dec 28 16:56:36 2012 [VMM][I]: ExitCode: 1 > Fri Dec 28 16:56:36 2012 [VMM][I]: Failed to execute virtualization driver > operation: deploy.Fri Dec 28 16:56:36 2012 [VMM][E]: Error deploying virtual > machine > Fri Dec 28 16:56:36 2012 [DiM][I]: New VM state is FAILED > > So how can I deal with this situation and what wrong with my configuration ? > > > Anybody have experienced with this situation please take time to give me your > advice how to solve it. > > Thanks many > > > thaibinhtt > > > _______________________________________________ > Users mailing list > Users@lists.opennebula.org > http://lists.opennebula.org/listinfo.cgi/users-opennebula.org > >
_______________________________________________ Users mailing list Users@lists.opennebula.org http://lists.opennebula.org/listinfo.cgi/users-opennebula.org