Hi all, I have a working installation of OpenNebula 3.8.3, but despite many efforts I still cannot ssh from the host into the VMs.
All hosts have: - an eth0 interface listening to the internal network of my institution - an eth1 interface for a private switched LAN only between the hosts that compose the OpenNebula cloud. The hosts have IPs 10.0.0.X on this network. On all the machines I have run the following commands: brctl addbr br1 brctl addif br1 eth1 ifconfig eth1 down ifconfig eth1 0.0.0.0 up ifconfig br1 10.0.0.X/24 up (where X=1,2,... depending on the host). I then defined in Sunstone a virtual network as follows: ============= ID : 0 NAME : vn-private USER : oneadmin GROUP : oneadmin CLUSTER : cluster TYPE : RANGED BRIDGE : br1 VLAN : No PHYSICAL DEVICE: VLAN ID : USED LEASES : 2 PERMISSIONS OWNER : um- GROUP : --- OTHER : --- VIRTUAL NETWORK TEMPLATE RANGE IP_START : 192.168.100.1 IP_END : 192.168.100.128 USED LEASES LEASE=[ IP="192.168.100.13", MAC="02:00:c0:a8:64:0d", USED="1", VID="14" ] LEASE=[ IP="192.168.100.37", MAC="02:00:c0:a8:64:25", USED="1", VID="41" ] ============= Now: using VNC, I see that the two VMs .13 and .37 can correctly ping each other.However, if I login to any host and do 'ssh root@192.168.100.13' it does not connect to the VMs. I tried then 'route add -net 192.168.100.0 netmask 255.255.255.0 dev br1' and 'route' shows correctly Destination Gateway Genmask Flags Metric Ref Use Iface 192.168.100.0 * 255.255.255.0 U 0 0 0 br1 but still ssh does not work. Can someone help me? My ultimate goals are: 1) to be able to ssh from the host into the VMs. 2) if possible, give internet connectivity to the VMs through eth0. Thanks, Giuliano _______________________________________________ Users mailing list Users@lists.opennebula.org http://lists.opennebula.org/listinfo.cgi/users-opennebula.org