Hi André, How did you end up with the wrong kvm.conf path in oned.conf? I simply copied the default configuration.
And yes, localhost is treated just like any other host, OpenNebula needs you to configure passwordless ssh for the oneadmin account. Regards -- Join us at OpenNebulaConf2013 <http://opennebulaconf.com> in Berlin, 24-26 September, 2013 -- Carlos Martín, MSc Project Engineer OpenNebula - The Open-source Solution for Data Center Virtualization www.OpenNebula.org | cmar...@opennebula.org | @OpenNebula<http://twitter.com/opennebula><cmar...@opennebula.org> On Mon, Aug 26, 2013 at 11:05 PM, Andre Gustavo Pereira da Silva < a...@cin.ufpe.br> wrote: > Hi Carlos > > Your tip did the loading of driver KVM work! Thank you. > > About the problem with SSH, i've found the solution on the link below, and > now it works: > http://bugs.centos.org/view.php?id=6468 > > All the previous errors disappeared. However, the VM still does not > deploy. The log reported that the kvm is not installed on the host. I'm > gointo to follow the official documentation to try to resolve the problem. > http://opennebula.org/documentation:rel4.2:kvmg > > Another question arised when I tried to create a VM on the server ONE > (localhost). The error message (this message continues after the log): > Mon Aug 26 17:47:46 2013 [TM] [I]: Command execution fail: / var / lib / > one / remotes / tm / shared / clone centos1 > var/lib/one/datastores/1/4db7457fbfefc1bbea96380d787d874e :/ localhost: / > var / lib / one / / datastores/0/4/disk.0 4 1 > Mon Aug 26 17:47:46 2013 [TM] [I]: clone: Cloning / > var/lib/one/datastores/1/4db7457fbfefc1bbea96380d787d874e in localhost :/ > var / lib / one / / datastores/0/4/disk. 0 > Mon Aug 26 17:47:46 2013 [TM] [E]: clone: Command "cd / > var/lib/one/datastores/0/4; cp-r / > var/lib/one/datastores/1/4db7457fbfefc1bbea96380d787d874e / > var/lib/one/datastores/0/4/disk.0 "failed: Permission denied, please try > again. > Mon Aug 26 17:47:46 2013 [TM] [I]: Permission denied, please try again. > Mon Aug 26 17:47:46 2013 [TM] [I]: Permission denied (publickey, > gssapi-keyex, gssapi-with-mic, password). > Mon Aug 26 17:47:46 2013 [TM] [E]: Error copying centos1 :/ > var/lib/one/datastores/1/4db7457fbfefc1bbea96380d787d874e to localhost :/ > var / lib / one / / datastores/0/4/disk .0 > Mon Aug 26 17:47:46 2013 [TM] [I]: ExitCode: 255 > Mon Aug 26 17:47:46 2013 [TM] [E]: Error executing image transfer script: > Error copying centos1 :/ > var/lib/one/datastores/1/4db7457fbfefc1bbea96380d787d874e to localhost :/ > var / lib / one / / datastores / 0/4/disk.0 > Mon Aug 26 17:47:46 2013 [DiM] [I]: New VM state is FAILED > > The question is: when I create a VM on localhost, it creates an SSH > session with himself? > > thank you, > > André > > > 2013/8/26 Carlos Martín Sánchez <cmar...@opennebula.org> > >> Hi, >> >> Your first error log seems related to the ssh configuration. >> XCP is not supported, only xen, kvm and vmware [1]. >> >> About the second error log, opennebula should not be looking for that >> file, it should be this one instead: >> /etc/one/vmm_exec/vmm_exec_kvm.conf >> >> Please check your /etc/one/oned.conf, does it contain this driver >> definition? >> >> VM_MAD = [ >> name = "kvm", >> executable = "one_vmm_exec", >> arguments = "-t 15 -r 0 kvm", >> default = "vmm_exec/vmm_exec_kvm.conf", >> type = "kvm" ] >> >> >> Regards. >> >> [1] http://opennebula.org/documentation:rel4.2:vmmg >> >> >> >> -- >> Join us at OpenNebulaConf2013 <http://opennebulaconf.com> in Berlin, >> 24-26 September, 2013 >> -- >> Carlos Martín, MSc >> Project Engineer >> OpenNebula - The Open-source Solution for Data Center Virtualization >> www.OpenNebula.org | cmar...@opennebula.org | >> @OpenNebula<http://twitter.com/opennebula><cmar...@opennebula.org> >> >> >> On Sat, Aug 24, 2013 at 12:10 AM, Andre Gustavo Pereira da Silva < >> a...@cin.ufpe.br> wrote: >> >>> Hi >>> >>> I'm beginning to study ONE and I'm finding some problems to run a VM. >>> >>> The error described in the log when I try to run a VM is (this message >>> continues after the message log): >>> Mon Aug 19 18:43:15 2013 [DiM][I]: New VM state is ACTIVE. >>> Mon Aug 19 18:43:15 2013 [LCM][I]: New VM state is PROLOG. >>> Mon Aug 19 18:43:15 2013 [TM][I]: Command execution fail: >>> /var/lib/one/remotes/tm/shared/clone >>> localhost.localdomain:/var/lib/one/datastores/1/4db7457fbfefc1bbea96380d787d874e >>> centos2:/var/lib/one//datastores/0/2/disk.0 2 1 >>> Mon Aug 19 18:43:15 2013 [TM][I]: clone: Cloning >>> /var/lib/one/datastores/1/4db7457fbfefc1bbea96380d787d874e in >>> centos2:/var/lib/one//datastores/0/2/disk.0 >>> Mon Aug 19 18:43:15 2013 [TM][E]: clone: Command "cd >>> /var/lib/one/datastores/0/2; cp -r >>> /var/lib/one/datastores/1/4db7457fbfefc1bbea96380d787d874e >>> /var/lib/one/datastores/0/2/disk.0" failed: Warning: Permanently added >>> 'centos2,10.66.66.21' (RSA) to the list of known hosts. >>> Mon Aug 19 18:43:15 2013 [TM][I]: Permission denied, please try again. >>> Mon Aug 19 18:43:15 2013 [TM][I]: Permission denied, please try again. >>> Mon Aug 19 18:43:15 2013 [TM][I]: Permission denied >>> (publickey,gssapi-keyex,gssapi-with-mic,password). >>> Mon Aug 19 18:43:15 2013 [TM][E]: Error copying >>> localhost.localdomain:/var/lib/one/datastores/1/4db7457fbfefc1bbea96380d787d874e >>> to centos2:/var/lib/one//datastores/0/2/disk.0 >>> Mon Aug 19 18:43:15 2013 [TM][I]: ExitCode: 255 >>> Mon Aug 19 18:43:15 2013 [TM][E]: Error executing image transfer script: >>> Error copying >>> localhost.localdomain:/var/lib/one/datastores/1/4db7457fbfefc1bbea96380d787d874e >>> to centos2:/var/lib/one//datastores/0/2/disk.0 >>> Mon Aug 19 18:43:15 2013 [DiM][I]: New VM state is FAILED >>> >>> Some considerations: >>> - My cloud server infrastructure is: XCP 1.6 (hypervisor) + CentOS 6.4 >>> + ONE 4.0.1 >>> - The host has the same infrastructure, except the ONE server. >>> - I've installed the ONE node package on the host. >>> - Oned.log includes the following error on ONE startup: >>> Fri Aug 23 18:00:40 2013 [VMM][E]: Error loading driver configuration >>> file /etc/Fri Aug 23 18:14:54 2013 [VMM][I]: Loading driver: kvm (KVM) >>> Fri Aug 23 18:14:54 2013 [VMM][E]: Error loading driver configuration >>> file /etc/one/vmm_ssh/vmm_ssh_kvm.conf : Error opening template file >>> >>> - I'm using the tutorial: >>> http://wiki.centos.org/Cloud/OpenNebula/QuickStart >>> - I can not log on host using SSH without password during boot. I have >>> to stop the SSH deamon service and then start it with the command '/ usr / >>> sbin / ssh'. Only then oneadmin user can log in the host without password. >>> I've read that other people go through the same problem and could not find >>> the answer. For example: >>> http://bugs.centos.org/print_bug_page.php?bug_id=4959 >>> - In my installation there is no file called '/ etc / one / vmm_ssh / >>> vmm_ssh_kvm.conf '. This directory is quoted in oned.log. This means that >>> kvm is not installed? how to do it? >>> - I can only add hosts to the ONE server using 'dummy' protocol. >>> >>> I appreciate any help. >>> >>> sorry for my bad english. >>> >>> André Gustavo >>> Brazil >>> a...@cin.ufpe.br >>> >>> >>> _______________________________________________ >>> Users mailing list >>> Users@lists.opennebula.org >>> http://lists.opennebula.org/listinfo.cgi/users-opennebula.org >>> >>> >> >
_______________________________________________ Users mailing list Users@lists.opennebula.org http://lists.opennebula.org/listinfo.cgi/users-opennebula.org