Hi Dave, when you try to register the following phones, what reply you get (except 401) ? also, do you use the same user for all the phones or separate users ?
"max_slot" is just an info. It says what was the maximum records in the location table so far. Regards, Bogdan Dave Poirier wrote: > Hello All, > I setup my Openser 1.3 and mysql. Authentication seems to work for > only the first phone that registers. I did a tcpdump from the server > and the rest of the phones get a 401 unauthorized. I can go into mysql > and actually see the correct username password in the database. I also > double checked it on the phones. Like I said... all three of the > phones will register but only if they are the first. Is it something > obvious that I'm missing? Anyone else run into this? If I do a > "openserctl ul show" (with debug on) I get the following output.... > > database engine 'MYSQL' loaded > Control engine 'FIFO' loaded > entering fifo_cmd ul_dump > Domain:: location table=512 records=1 max_slot=1 > AOR:: 1024 > Contact:: sip:[EMAIL PROTECTED]:5060 > <http://sip:[EMAIL PROTECTED]:5060> Q= > Expires:: 2657 > Callid:: [EMAIL PROTECTED] > <mailto:[EMAIL PROTECTED]> > Cseq:: 2 > User-agent:: PolycomSoundPointIP-SPIP_550-UA/3.0.0.0258 > State:: CS_NEW > Flags:: 0 > Cflag:: 0 > Socket:: udp:198.236.66.129:5060 <http://198.236.66.129:5060> > Methods:: 8063 > FIFO command was: > :ul_dump:openser_receiver_22488 > > Is the "max_sot=1" a concern? If so I am at a loss for where to change it. > > Thanks for any help, > Dave > > -- > David Poirier > > ------------------------------------------------------------------------ > > _______________________________________________ > Users mailing list > [email protected] > http://lists.openser.org/cgi-bin/mailman/listinfo/users > _______________________________________________ Users mailing list [email protected] http://lists.openser.org/cgi-bin/mailman/listinfo/users
