Elena-Ramona Modroiu wrote: > Hi, > > Flosch wrote: > >> Can u tell me how do I load the sipauth module without the sipauth.so file? >> >> > you have to tweak the build system (configure files) to compile the > sipauth module. > Have a look at configure.ac and search for server_modules and client_modules directive where you can add the modules you need. > Regards, > Ramona > >> Cheers, Flo >> >> >> Elena-Ramona Modroiu-2 wrote: >> >> >>> Hi, >>> >>> check if the print.so exists. Also change in the config file the print >>> module loading directive to >>> >>> module= print.so >>> >>> Regards, >>> Ramona >>> >>> >>> >>> Florian Schildger wrote: >>> >>> >>>> Hi @ all, >>>> >>>> I want to built a Diameter-Client and –Server with disc, but it is >>>> very tricky. Can someone help me? >>>> >>>> My plan is, a UA gives an invite to a SIP Express Router, this one >>>> forwards the request to a DISC Client, which forwards the request to >>>> the DISC Server and authenticate the UA. >>>> My first problem is to start the DISC. >>>> >>>> What I did: >>>> >>>> 1. Download the disc with cvs and Install it >>>> >>>> cvs -d:pserver:[EMAIL PROTECTED]:/cvsroot/disc >>>> <http://service.gmx.net/de/cgi/g.fcgi/mail/new?CUSTOMERNO=19451716&t=de1361741099.1214292288.7541f343&to=-d%3Apserver%3Aanonymous%40cvs.disc.berlios.de> >>>> >>>> login >>>> cvs -z3 -d:pserver:[EMAIL PROTECTED]:/cvsroot/disc >>>> <http://service.gmx.net/de/cgi/g.fcgi/mail/new?CUSTOMERNO=19451716&t=de1361741099.1214292288.7541f343&to=-d%3Apserver%3Aanonymous%40cvs.disc.berlios.de> >>>> >>>> co disc >>>> ./rebuild >>>> make >>>> make install >>>> >>>> 2. Then Configure aaa_client.cfg >>>> >>>> 17 aaa_realm= 192.160.45 >>>> 18 aaa_fqdn = 192.160.45:1810 >>>> >>>> 21 module_path= usr/local/lib/disc/client/ >>>> 22 module= usr/local/lib/disc/client/print.so >>>> >>>> 32 peer= aaa://192.168.0.45:1812;transport=tcp # Server >>>> 33 peer= aaa://192.168.0.45:5060;transport=tcp # SER >>>> >>>> 42 route= aaa://192.168.0.45:1812;transport=tcp >>>> >>>> # For the Modules I don't know what to do, because I couldn't find any >>>> module!!! Only the print one, but I think I don'tneed it, do I? >>>> >>>> 3. After that I could't not start disc, because I had no File disc.cfg >>>> in /usr/local/etc/disc/disc.cfg. What I did is copy the aaa_client.cfg >>>> to disc.cfg >>>> >>>> cp /usr/local/disc/src/aaa_client.cfg /usr/local/etc/disc/disc.cfg >>>> >>>> 4. Then I start in the Console: >>>> >>>> debian:~# disc >>>> qm_malloc(0xb7cab008, 11) called from cfg_parser.c: cfg_getstr(213) >>>> qm_malloc(0xb7cab008, 12) returns address 0xb7cb148c frag. 0xb7cb1474 >>>> (size=12) on 1 -th hit >>>> qm_malloc(0xb7cab008, 16) called from cfg_parser.c: cfg_getstr(213) >>>> qm_malloc(0xb7cab008, 16) returns address 0xb7cb14c8 frag. 0xb7cb14b0 >>>> (size=16) on 1 -th hit >>>> qm_malloc(0xb7cab008, 27) called from cfg_parser.c: cfg_getstr(213) >>>> qm_malloc(0xb7cab008, 28) returns address 0xb7cb1508 frag. 0xb7cb14f0 >>>> (size=28) on 1 -th hit >>>> before loading the modules >>>> loading module >>>> usr/local/lib/disc/client/print.so...qm_malloc(0xb7cab008, 35) called >>>> from cfg_parser.c: cfg_getstr(213) >>>> qm_malloc(0xb7cab008, 36) returns address 0xb7cb1554 frag. 0xb7cb153c >>>> (size=36) on 1 -th hit >>>> ERROR: load_module: failed to load >>>> <usr/local/lib/disc/client/print.so> in <client/modules>: >>>> usr/local/lib/disc/client/print.so: cannot open shared object file: No >>>> such file or directory >>>> FAILED >>>> ERROR (-1): on line 25 >>>> ERROR: cannot init the core >>>> ERROR:AAAClose: AAA library is not initialized >>>> INFO:init_trans_manager: transaction manager stoped! >>>> INFO:destroy_peer_manager: peer manager stoped >>>> INFO:destroy_timer: timer thread stoped >>>> qm_free(0xb7cab008, 0xb7cb148c), called from aaa_core.c: >>>> destroy_aaa_core(576) >>>> qm_free: freeing frag. 0xb7cb1474 alloc'ed from cfg_parser.c: >>>> cfg_getstr(213) >>>> qm_free(0xb7cab008, 0xb7cb14c8), called from aaa_core.c: >>>> destroy_aaa_core(577) >>>> qm_free: freeing frag. 0xb7cb14b0 alloc'ed from cfg_parser.c: >>>> cfg_getstr(213) >>>> qm_status (0xb7cab008): >>>> heap size= 1022872 >>>> used= 68, used+overhead=26012, free=996860 >>>> max used (+overhead)= 26040 >>>> dumping all allocked. fragments: >>>> 0. N address=0xb7cb1458 frag=0xb7cb1440 size=4 >>>> alloc'd from shm_mem.c: shm_mem_init_mallocs(185) >>>> start check=f0f0f0f0, end check= c0c0c0c0, abcdefed >>>> 3. N address=0xb7cb1508 frag=0xb7cb14f0 size=28 >>>> alloc'd from cfg_parser.c: cfg_getstr(213) >>>> start check=f0f0f0f0, end check= c0c0c0c0, abcdefed >>>> 4. N address=0xb7cb1554 frag=0xb7cb153c size=36 >>>> alloc'd from cfg_parser.c: cfg_getstr(213) >>>> start check=f0f0f0f0, end check= c0c0c0c0, abcdefed >>>> dumping free list stats : >>>> hash= 3. fragments no.: 1 >>>> hash= 4. fragments no.: 1 >>>> hash= 521. fragments no.: 1 >>>> ----------------------------- >>>> shm_mem_destroy >>>> destroying the shared memory lock >>>> >>>> >>>> He could not load the module right? But where I can get it? How can I >>>> use disc as Client and Server? I did only the configure for the >>>> client! I read out, that disc only can work as an client or as an server. >>>> >>>> Can someone give me a hint? >>>> >>>> Cheers, Flo >>>> >>>> ------------------------------------------------------------------------ >>>> >>>> _______________________________________________ >>>> Users mailing list >>>> [email protected] >>>> http://lists.openser.org/cgi-bin/mailman/listinfo/users >>>> >>>> >>>> >>> _______________________________________________ >>> Users mailing list >>> [email protected] >>> http://lists.openser.org/cgi-bin/mailman/listinfo/users >>> >>> >>> >>> >> >> > > > _______________________________________________ > Users mailing list > [email protected] > http://lists.openser.org/cgi-bin/mailman/listinfo/users >
_______________________________________________ Users mailing list [email protected] http://lists.openser.org/cgi-bin/mailman/listinfo/users
