See: http://tools.ietf.org/html/draft-jfp-sip-isup-header-00
Grep for "CIC" / "cic". Alex Balashov wrote: > Any standard ISUP attribute has a corresponding map into SIP-T. So, > yes, any bearer-related information is going to be in there as well. > > Brett Nemeroff wrote: > >> One question that I'm not sure of.. Are there any extensions in epru >> SIP-T that specify remote interface to use, such as used in >> H.248/Megaco? ie: dial 123 on TCIC 000010012 >> -Brett >> >> >> On Thu, Feb 19, 2009 at 11:27 AM, Alex Balashov >> <abalas...@evaristesys.com> wrote: >>> That is accurate. >>> >>> Brett Nemeroff wrote: >>> >>>> From what I understand about SIP-T it's SIP + ISUP params in the >>>> message. The required bits such as RURI and SDP all work as expected. >>>> >>>> Group, feel free to correct me there. Depending on your specific setup >>>> and network architecture, it should work. However, you may not be able >>>> to do anything with the ISUP components of the messaging. >>>> >>>> -Brett >>>> >>>> >>>> >>>> On Thu, Feb 19, 2009 at 11:14 AM, Daviramos Roussenq Fortunato >>>> <daviramo...@gmail.com> wrote: >>>>> Hi Alex. >>>>> >>>>> If a different protocol is not to say that you can connect directly to >>>>> Asterisk and will work, just taking the resources of ISUP? >>>>> >>>>> SIP-T is not talking with SIP protocol are different, after all SIP-T >>>>> carries information that the SIP can not interpret. >>>>> >>>>> The Problem is the following I get a SIP-T trunk and Asterisk to deliver >>>>> precise, how best to do. >>>>> >>>>> 2009/2/19 Alex Balashov <abalas...@evaristesys.com> >>>>>> Not possible, Asterisk doesn't understand SIP-T. >>>>>> >>>>>> What do you mean by that, anyway? Only a device that supports ISUP >>>>>> interworking will support SIP-T. >>>>>> >>>>>> Secondly, as is often repeated here, SIP-T is a specification for a >>>>>> _PAYLOAD_ - an extension - of SIP. It is not a different protocol. >>>>>> >>>>>> Daviramos Roussenq Fortunato wrote: >>>>>> >>>>>>> Hi List. >>>>>>> >>>>>>> I have a trunk SIP-T must deliver it to the Asterisk in SIP. The Opens >>>>>>> is that? >>>>>>> How should be my opensip.cfg? >>>>>>> >>>>>>> >>>>>>> >>>>>>> ------------------------------------------------------------------------ >>>>>>> >>>>>>> _______________________________________________ >>>>>>> Users mailing list >>>>>>> Users@lists.opensips.org >>>>>>> http://lists.opensips.org/cgi-bin/mailman/listinfo/users >>>>>> -- >>>>>> Alex Balashov >>>>>> Evariste Systems >>>>>> Web : http://www.evaristesys.com/ >>>>>> Tel : (+1) (678) 954-0670 >>>>>> Direct : (+1) (678) 954-0671 >>>>>> Mobile : (+1) (678) 237-1775 >>>>> _______________________________________________ >>>>> Users mailing list >>>>> Users@lists.opensips.org >>>>> http://lists.opensips.org/cgi-bin/mailman/listinfo/users >>>>> >>>>> >>>> _______________________________________________ >>>> Users mailing list >>>> Users@lists.opensips.org >>>> http://lists.opensips.org/cgi-bin/mailman/listinfo/users >>> -- >>> Alex Balashov >>> Evariste Systems >>> Web : http://www.evaristesys.com/ >>> Tel : (+1) (678) 954-0670 >>> Direct : (+1) (678) 954-0671 >>> Mobile : (+1) (678) 237-1775 >>> > > -- Alex Balashov Evariste Systems Web : http://www.evaristesys.com/ Tel : (+1) (678) 954-0670 Direct : (+1) (678) 954-0671 Mobile : (+1) (678) 237-1775 _______________________________________________ Users mailing list Users@lists.opensips.org http://lists.opensips.org/cgi-bin/mailman/listinfo/users