Folks, We have recently become a CLEC and we are entitled to query the North- American LNP database for routing information.
The information we want from the database, is the local routing number associated with a phone number which has been ported to another competitor of the ILEC. We have direct interconnection trunks with the ILEC (inter-machine trunks) and we are to convey the LRN over the SS7 ISUP route between us and the ILEC in the ISUP Generic Address Parameter and turn up the Forward Call Identifier Bit M (FCI+M), for any call completed on an inter-machine trunk. We have a SIP gateway which is able to perform this task when being sent a call over the SIP interface as per RFC 4694, which expects the URI in the invite message to contain the following syntax: ******************** http://tools.ietf.org/html/rfc4694 Section 6 C. A "tel" URI, tel:+1-202-533-1234, contains a geographical telephone number "+1-202-533-1234". Assume that this geographical telephone number is ported and is associated with a routing number "1-202-544-0000". After retrieving the NP-related information, the "tel" URI would be set to: tel:+1-202-533-1234;npdi;rn=+1-202-544-0000 **************** So the SIP message would look like INVITE tel:+1-202-533-1234;npdi;rn=+1-202-544-0000 SIP 2/0 As you can see, if this does not take just a couple of minutes, and a bottle of pepsi to code, I would be highly surprised. So the proposed task is as follows: Parse a SIP 3XX redirect response coming from a SIP proxy operated by the local number portability service operator, and route the SIP message to a SIP gateway which is able to deal with the additional information in the INVITE i.e. INVITE tel:+1-202-533-1234;npdi;rn= +1-202-544-0000 SIP 2/0 I may decide to rewrite the rn= field to remove the +1- in front of the phone number and the - in the phone number, such as to send the gateway the following message: INVITE tel:2025331234;npdi;rn=2025440000 SIP 2/0 Additionally, I may decide to translate the TEL uri to a SIP uri: i.e. from INVITE tel:+1-202-533-1234;npdi;rn=+1-202-544-0000 SIP 2/0 to INVITE sip:2025331234;npdi;rn=2025440000 SIP 2/0 The job of the SIP gateway is to parse the npdi indicator and the rn= information and to map the npdi to an ISUP message flipping on the Forward Call Indicator Bit M as well as placing the content of the rn= 2025440000 1, which specifies npdi=yes, and 2, play by the ILEC rules which I interconnect to and which wants to see the ISUP GAP parameter containing the content of the RN, i.e. 2025440000 So the quesiton to all of you who known opensips well; is 1) can this be done without modifying the code of opensips, and 2) if the code is to be modified to allow the parser to deal with 'npdi' and 'rn= parameters' with full support for the regexp rewriting functions that we all love from opensips, then what process would you like us to follow to commit this patch. Alternatively, we may be able to contribute some money for such a patch. p.s., is anybody out there utilizing Opensips as a CLEC for LNP dipping purposes???? Best regards, -=Francois=- -- Francois D. Menard Director of technology Xittel telecommunications inc. 1350 Royale #800 Trois-Rivieres, QC G9A 4J4 Tel: +1 819 601-6633 Urgency: +1 819 448-1383 Fax: + 819 374-0395 email: [email protected] _______________________________________________ Users mailing list [email protected] http://lists.opensips.org/cgi-bin/mailman/listinfo/users
