OK, done - see http://www.opensips.org/Resources/DocsTools#toc11
Regards, Bogdan Chris Maciejewski wrote: > Hi Bogdan, > > Yes, sure. No problem at all. > > Best regards, > Chris > > > 2009/5/14 Bogdan-Andrei Iancu <bog...@voice-system.ro>: > >> Hi Chris, >> >> Can I link your tool from the opensips tools web page - >> http://www.opensips.org/Resources/DocsTools ? >> >> Thanks and regards, >> Bogdan >> >> Chris Maciejewski wrote: >> >>> Hi, >>> >>> You can find a PhpSIP UA I wrote some time ago, which can be used to >>> send a NOTIFY to resync/reboot Linksys phone. It is far from being a >>> complete SIP UA (no transactions matching etc.), but I am using it all >>> the time to send NOTIFY, or INVITE, REFER for Click 2 Call from my web >>> application (PHP based) and it works well. >>> >>> http://wima.co.uk/PhpSIP/ >>> >>> Also you will find two functions auth() and authWWW() which calculate >>> Digest and WWW responses. >>> >>> Regards, >>> Chris >>> >>> >>> 2009/5/13 Bogdan-Andrei Iancu <bog...@voice-system.ro>: >>> >>> >>>> Matti, >>>> >>>> you should read more about digest auth in the RFC - >>>> http://www.ietf.org/rfc/rfc2617.txt >>>> >>>> Regards, >>>> Bogdan >>>> >>>> Matti Zemack wrote: >>>> >>>> >>>>> Hi, >>>>> >>>>> Thanks again Bogdan. Tried that. Still no go. Suppose I'll try to get >>>>> some help from Linksys people. >>>>> >>>>> /Matti >>>>> >>>>> -----Original Message----- >>>>> From: Bogdan-Andrei Iancu [mailto:bog...@voice-system.ro] >>>>> Sent: den 13 maj 2009 17:46 >>>>> To: Matti Zemack >>>>> Cc: Sergio Gutierrez; users@lists.opensips.org >>>>> Subject: Re: [OpenSIPS-Users] Rebooting a Linksys through OpenSIPS >>>>> >>>>> With qop, do : >>>>> >>>>> response=MD5( HA1 ":" nonce ":" nc ":" cnonce ":" qop ":" HA2) >>>>> >>>>> Regards, >>>>> Bogdan >>>>> >>>>> Matti Zemack wrote: >>>>> >>>>> >>>>> >>>>>> Hi again, >>>>>> >>>>>> Yes, we tried almost that (as we don't receive a cnonce nor >>>>>> nonce-count in the 401 from Linksys, we only get the qop="auth" which >>>>>> actually by the RFC forces us to use your suggested longer response >>>>>> code.). >>>>>> >>>>>> We did try with an empty cnonce and nonce count= "nc=00000001" (or >>>>>> empty). >>>>>> >>>>>> Without success. >>>>>> >>>>>> /Matti >>>>>> >>>>>> *From:* Sergio Gutierrez [mailto:sag...@gmail.com] >>>>>> *Sent:* den 13 maj 2009 17:16 >>>>>> *To:* Bogdan-Andrei Iancu >>>>>> *Cc:* Matti Zemack; users@lists.opensips.org >>>>>> *Subject:* Re: [OpenSIPS-Users] Rebooting a Linksys through OpenSIPS >>>>>> >>>>>> Hi Bogdan. >>>>>> >>>>>> For our particular need, it looks like we need to send the response in >>>>>> a more complex way: >>>>>> >>>>>> response = md5(HA1:nonce:nonceCount:clientNonce:qop:ha2) >>>>>> >>>>>> Could you give us any hint about nonceCount and clientNonce >>>>>> parameters? Documentation is not very clear. >>>>>> >>>>>> Thanks and regards. >>>>>> >>>>>> Sergio. >>>>>> >>>>>> On Wed, May 13, 2009 at 9:38 AM, Bogdan-Andrei Iancu >>>>>> <bog...@voice-system.ro <mailto:bog...@voice-system.ro>> wrote: >>>>>> >>>>>> Hi Matti, >>>>>> >>>>>> Actually it is SIP auth, so digest auth (RFC 2617) >>>>>> Shortly: >>>>>> HA1=MD5( auth_usernam ":" realm ":" passwd ) >>>>>> >>>>>> HA2=MD5( method ":" ruri ) >>>>>> >>>>>> response=MD5( HA1 ":" nonce ":" HA2) >>>>>> >>>>>> >>>>>> Regards, >>>>>> Bogdan >>>>>> >>>>>> Matti Zemack wrote: >>>>>> >>>>>> >>>>>> >>>>>>> Hi again, >>>>>>> >>>>>>> First of all; Thanks Bogdan! >>>>>>> Your tip works (theoretically) fine. >>>>>>> But, I just can't find a way of calculating the PAP2s authentication. >>>>>>> Not much seems to be documented. >>>>>>> Does anyone have any hints regarding Linksys authentication (for a >>>>>>> reboot at least). >>>>>>> >>>>>>> I've tried calculating using >>>>>>> http://en.wikipedia.org/wiki/Digest_access_authentication , and >>>>>>> basically sticking to RFC2069, as I don't believe I have have >>>>>>> nonceCount >>>>>>> & clientNonce. >>>>>>> By the way; how should the digestURI look? (I've tried the >>>>>>> combinations >>>>>>> that came to my mind...) >>>>>>> >>>>>>> Best regards, >>>>>>> Matti Zemack, Stockholm, Sweden >>>>>>> >>>>>>> -----Original Message----- >>>>>>> From: Bogdan-Andrei Iancu [mailto:bog...@voice-system.ro >>>>>>> >>>>>>> >>>>>>> >>>>>> <mailto:bog...@voice-system.ro>] >>>>>> >>>>>> >>>>>> >>>>>>> Sent: den 12 maj 2009 10:33 >>>>>>> To: Matti Zemack >>>>>>> Cc: users@lists.opensips.org <mailto:users@lists.opensips.org> >>>>>>> Subject: Re: [OpenSIPS-Users] Rebooting a Linksys through OpenSIPS >>>>>>> >>>>>>> Hi Matti, >>>>>>> >>>>>>> Well, it should be possible - you do a 2 steps interaction with the >>>>>>> Linkys : >>>>>>> - first send the NOTIFY via the t_uac_dlg MI command and get from the >>>>>>> result the auth challenge (in the MI command response you do have >>>>>>> access >>>>>>> >>>>>>> to the SIP reply) >>>>>>> - generate a new NOTIFY request including the Authorize header >>>>>>> calculated based on the received challenge. >>>>>>> >>>>>>> Regards, >>>>>>> Bogdan >>>>>>> >>>>>>> Matti Zemack wrote: >>>>>>> >>>>>>> >>>>>>> >>>>>>> >>>>>>>> Hi all, >>>>>>>> >>>>>>>> I'm still dipping my toes in deep waters with OpenSips 1.5... >>>>>>>> >>>>>>>> And I've come across a small problem. I would like to reboot Linksys >>>>>>>> ATA (PAP2 etc...) using OpenSIPS. >>>>>>>> >>>>>>>> Can this maybe be done? >>>>>>>> >>>>>>>> Basically I use XML-RPC FIFO to send the SIP command. The problem is >>>>>>>> that Linksys replies with 401 challenge. Can I, or is it at all >>>>>>>> possible to reply to this challenge using OpenSIPS? >>>>>>>> >>>>>>>> >>>>>>>> >>>>>>>> >>>>>>>> >>>>>>> >>>>>> _______________________________________________ >>>>>> Users mailing list >>>>>> Users@lists.opensips.org <mailto:Users@lists.opensips.org> >>>>>> http://lists.opensips.org/cgi-bin/mailman/listinfo/users >>>>>> >>>>>> >>>>>> >>>>>> >>>>>> -- >>>>>> Sergio GutiƩrrez >>>>>> >>>>>> >>>>>> >>>>>> >>>>> >>>> _______________________________________________ >>>> Users mailing list >>>> Users@lists.opensips.org >>>> http://lists.opensips.org/cgi-bin/mailman/listinfo/users >>>> >>>> >>>> >>> _______________________________________________ >>> Users mailing list >>> Users@lists.opensips.org >>> http://lists.opensips.org/cgi-bin/mailman/listinfo/users >>> >>> >>> >> > > _______________________________________________ Users mailing list Users@lists.opensips.org http://lists.opensips.org/cgi-bin/mailman/listinfo/users