Hi Mani, I can not open the document on google docs. It says that the document is not available. I see in the paste of your config document that at the line with the check before calling pua_xmpp_req_winfo there is a big space in the middle of the word "presence" .. You could check that.
regards, Anca mani sivaraman wrote: > Hi Anca > I am using 1.5.1 version of opensips and I have pua_xmpp_req_winfo > call in my cfg file. I get NOTIFY for Watcher Info with the > watcherinfo+xml payoad. But there is no presence state communication > sent from Jabber2 server to opensips. Did you look at the debug output > document that I sent you ?. That should have it all. > > Here is my config file. > > > # main request routing logic > > route{ > > # initial sanity checks -- messages with > # max_forwards==0, or excessively long requests > if (!mf_process_maxfwd_header("10")) { > sl_send_reply("483","Too Many Hops"); > exit; > }; > > #if (msg:len >= 2048 ) { > # sl_send_reply("513", "Message too big"); > # exit; > #}; > > # we record-route all messages -- to make sure that > # subsequent messages will go through our proxy; that's > # particularly good if upstream and downstream entities > # use different transport protocol > if (!method=="REGISTER") > record_route(); > > # subsequent messages withing a dialog should take the > # path determined by record-routing > if (loose_route()) { > # mark routing logic in request > append_hf("P-hint: rr-enforced\r\n"); > route(1); > }; > if(method == "INVITE") > setflag(5); > > if( uri=~"sip:....@sip-xmpp.smithmicro.com > <mailto:sip%3a....@sip-xmpp.smithmicro.com>" || > uri=~"sip:....@sip-xmpp.smithmicro.com > <mailto:sip%3a....@sip-xmpp.smithmicro.com>" || > uri=~"sip:....@sips01.smithmicro.com > <mailto:sip%3a....@sips01.smithmicro.com>") > { > if( is_method("PUBLISH|SUBSCRIBE|NOTIFY")) > route(2); > } > > if( uri=~"sip:....@sip-xmpp.smithmicro.com > <mailto:sip%3a....@sip-xmpp.smithmicro.com>") > { > # absorb retransmissions ### > if (!t_newtran()) { > sl_reply_error(); > return; > } > if (method == "MESSAGE") { > log("*** xmpp-handled MESSAGE message.\n"); > if (xmpp_send_message()) { > t_reply("200", "Accepted"); > } else { > t_reply("404", "Not found"); > } > return; > }else { > t_reply("403","not supported"); > exit; > } > > } > > if (!uri==myself) { > # mark routing logic in request > append_hf("P-hint: outbound\r\n"); > # if you have some interdomain connections via TLS > #if(uri=~"@tls_domain1.net <http://tls_domain1.net>") { > # t_relay("tls:domain1.net <http://domain1.net>"); > # exit; > #} else if(uri=~"@tls_domain2.net > <http://tls_domain2.net>") { > # t_relay("tls:domain2.net <http://domain2.net>"); > # exit; > #} > route(1); > }; > > # if the request is for other domain use UsrLoc > # (in case, it does not work, use the following command > # with proper names and addresses in it) > if (uri==myself) { > > if( is_method("PUBLISH|SUBSCRIBE|NOTIFY")) > route(2); > > if (method=="REGISTER") { > > if (!www_authorize("", "subscriber")) > { > www_challenge("", "0"); > exit; > } > > if (!check_to()) > { > sl_send_reply("403","Forbidden auth ID"); > exit; > } > > if (!save("location")) > sl_reply_error(); > > exit; > }; > > # native SIP destinations are handled using our USRLOC DB > if (!lookup("location")) { > sl_send_reply("404", "Not Found"); > exit; > }; > append_hf("P-hint: usrloc applied\r\n"); > }; > > route(1); > } > > route[1] { > # send it out now; use stateful forwarding as it works reliably > # even for UDP2TCP > if (!t_relay()) { > sl_reply_error(); > }; > exit; > } > > route[2] > { > if ( !t_newtran() ){ > sl_reply_error(); > exit; > }; > > if( is_method("NOTIFY") && > uri=~"sip:....@sip-xmpp.smithmicro.com > <mailto:sip%3a....@sip-xmpp.smithmicro.com>"){ > pua_xmpp_notify(); > t_reply("200", "OK"); > exit; > } > > if(is_method("PUBLISH")){ > handle_publish(); > #t_release(); > /* the call to t_release is no longer needed in 1.5 */ > } > else > if( is_method("SUBSCRIBE")){ > handle_subscribe(); > if( uri=~"sip:....@sip-xmpp.smithmicro.com > <mailto:sip%3a....@sip-xmpp.smithmicro.com>" && $hdr(Event)== > "pres ence"){ > pua_xmpp_req_winfo("$ruri", "$hdr(Expires)"); > } > #t_release(); > /* the call to t_release is no longer needed in 1.5 */ > } > exit; > } > > > On Thu, Jun 25, 2009 at 7:26 AM, Anca Vamanu <a...@opensips.org > <mailto:a...@opensips.org>> wrote: > > Hi Mani, > > I order to have opensips send subscribe messages to jabber, you > need to call 'pua_xmpp_req_winfo("$ruri", "$hdr(Expires)");' when > you see from the script that a Subscribe request is sent to a > jabber contact. This is the function responsible for sending > subscribe messages to jabber. > > What opensips version are you using? > > > regards, > Anca > > mani sivaraman wrote: > > Hi Anca > I do not see any xmpp subscribe packet request sent from > opensips to jabber server. That's the reason why jabber server > is not sending any presence notify to opensips. Jabber sends > the xmpp status to other clients like pidgin. > > When I add a xmpp buddy to sip client, I get the > Subscriber/200 OK response. I can see the output saying > subscribe sent in behalf of xmpp buddy.. etc. But this is just > a sip subscribe output. I do not see any xmpp subscribe sent > to jabber server from opensips. What is blocking opensips from > sendsing the xmpp subscribes to jabber server ? > > Please let me know. > > On Wed, Jun 24, 2009 at 11:12 AM, mani sivaraman > <mani.opens...@gmail.com <mailto:mani.opens...@gmail.com> > <mailto:mani.opens...@gmail.com > <mailto:mani.opens...@gmail.com>>> wrote: > > Oh wait, this xml packet is destined to > "ja...@xmpp.smithmicro.com <mailto:ja...@xmpp.smithmicro.com> > <http://ja...@xmpp.smithmicro.com/275c37159368 > <http://xmpp.smithmicro.com/275c37159368>>" , not opensips > > c2s interface. Since all status goes out from 5347 to all xmpp > clients, I have to separate out the opensips port connected to > 5347 and then try. I found it to be dynamic port 59284. After > doing ngrep on that port I see opensips sending all status > update > to 5347, but not other way. The only packet from 5347 to > 59284 is > a probe to know if the an offline sip buddy is available (last > couple of packets) > > Here is the ngrep output > > sips01:/etc/jabberd2# ngrep -d lo port 59284 > interface: lo (127.0.0.0/255.0.0.0 > <http://127.0.0.0/255.0.0.0> <http://127.0.0.0/255.0.0.0>) > > filter: (ip or ip6) and ( port 59284 ) > # > T 172.16.0.139:59284 <http://172.16.0.139:59284> > <http://172.16.0.139:59284> -> > 172.16.0.139:5347 <http://172.16.0.139:5347> > <http://172.16.0.139:5347> [AP] > > <presence to="ja...@xmpp.smithmicro.com > <mailto:ja...@xmpp.smithmicro.com> > <mailto:ja...@xmpp.smithmicro.com > <mailto:ja...@xmpp.smithmicro.com>>" > > from="rboxall*sips01.smithmicro.com > <http://sips01.smithmicro.com> > <http://sips01.smithmicro.com>@xmpp-sip.smithmicro.com > <http://xmpp-sip.smithmicro.com> > <http://xmpp-sip.smithmicro.com>" > type="unavailable"/> > ## > T 172.16.0.139:59284 <http://172.16.0.139:59284> > <http://172.16.0.139:59284> -> > 172.16.0.139:5347 <http://172.16.0.139:5347> > <http://172.16.0.139:5347> [AP] > > <presence to="ja...@xmpp.smithmicro.com > <mailto:ja...@xmpp.smithmicro.com> > <mailto:ja...@xmpp.smithmicro.com > <mailto:ja...@xmpp.smithmicro.com>>" > > from="rboxall*sips01.smithmicro.com > <http://sips01.smithmicro.com> > <http://sips01.smithmicro.com>@xmpp-sip.smithmicro.com > <http://xmpp-sip.smithmicro.com> > <http://xmpp-sip.smithmicro.com>" > type="unavailable"/> > ## > T 172.16.0.139:59284 <http://172.16.0.139:59284> > <http://172.16.0.139:59284> -> > 172.16.0.139:5347 <http://172.16.0.139:5347> > <http://172.16.0.139:5347> [AP] > > <presence to="ja...@xmpp.smithmicro.com > <mailto:ja...@xmpp.smithmicro.com> > <mailto:ja...@xmpp.smithmicro.com > <mailto:ja...@xmpp.smithmicro.com>>" > > from="rboxall*sips01.smithmicro.com > <http://sips01.smithmicro.com> > <http://sips01.smithmicro.com>@xmpp-sip.smithmicro.com > <http://xmpp-sip.smithmicro.com> > <http://xmpp-sip.smithmicro.com>"> > > . <status>hi there !!!</status>. > <priority>0.00</priority>. </presence> > ## > T 172.16.0.139:59284 <http://172.16.0.139:59284> > <http://172.16.0.139:59284> -> > 172.16.0.139:5347 <http://172.16.0.139:5347> > <http://172.16.0.139:5347> [AP] > > <presence to="ja...@xmpp.smithmicro.com > <mailto:ja...@xmpp.smithmicro.com> > <mailto:ja...@xmpp.smithmicro.com > <mailto:ja...@xmpp.smithmicro.com>>" > > from="rboxall*sips01.smithmicro.com > <http://sips01.smithmicro.com> > <http://sips01.smithmicro.com>@xmpp-sip.smithmicro.com > <http://xmpp-sip.smithmicro.com> > <http://xmpp-sip.smithmicro.com>"> > > . <status>hi there !!!</status>. > <priority>0.00</priority>. </presence> > ## > T 172.16.0.139:5347 <http://172.16.0.139:5347> > <http://172.16.0.139:5347> -> > 172.16.0.139:59284 <http://172.16.0.139:59284> > <http://172.16.0.139:59284> [AP] > > <presence xmlns='jabber:client' type='probe' > to='rboxall*sips01.smithmicro.com > <http://sips01.smithmicro.com> > <http://sips01.smithmicro.com>@xmpp-sip.smithmicro.com > <http://xmpp-sip.smithmicro.com> > <http://xmpp-sip.smithmicro.com>' from='jabb1 > @xmpp.smithmicro.com <http://xmpp.smithmicro.com> > <http://xmpp.smithmicro.com>'/> > ## > T 172.16.0.139:59284 <http://172.16.0.139:59284> > <http://172.16.0.139:59284> -> > 172.16.0.139:5347 <http://172.16.0.139:5347> > <http://172.16.0.139:5347> [AP] > > <presence to="ja...@xmpp.smithmicro.com > <mailto:ja...@xmpp.smithmicro.com> > <mailto:ja...@xmpp.smithmicro.com > <mailto:ja...@xmpp.smithmicro.com>>" > > from="rboxall*sips01.smithmicro.com > <http://sips01.smithmicro.com> > <http://sips01.smithmicro.com>@xmpp-sip.smithmicro.com > <http://xmpp-sip.smithmicro.com> > <http://xmpp-sip.smithmicro.com>">. <status> > > hi there !!!</status>. <priority>0.00</priority>. > </presence> > ## > T 172.16.0.139:5347 <http://172.16.0.139:5347> > <http://172.16.0.139:5347> -> > 172.16.0.139:59284 <http://172.16.0.139:59284> > <http://172.16.0.139:59284> [AP] > > <presence xmlns='jabber:client' type='probe' > to='msivaraman*sips01.smithmicro.com > <http://sips01.smithmicro.com> > <http://sips01.smithmicro.com>@xmpp-sip.smithmicro.com > <http://xmpp-sip.smithmicro.com> > <http://xmpp-sip.smithmicro.com>' from='ja > b...@xmpp.smithmicro.com <mailto:b...@xmpp.smithmicro.com> > <mailto:b...@xmpp.smithmicro.com > <mailto:b...@xmpp.smithmicro.com>>'/> > # > T 172.16.0.139:59284 <http://172.16.0.139:59284> > <http://172.16.0.139:59284> -> > 172.16.0.139:5347 <http://172.16.0.139:5347> > <http://172.16.0.139:5347> [AP] > > <presence to="ja...@xmpp.smithmicro.com > <mailto:ja...@xmpp.smithmicro.com> > <mailto:ja...@xmpp.smithmicro.com > <mailto:ja...@xmpp.smithmicro.com>>" > > from="msivaraman*sips01.smithmicro.com > <http://sips01.smithmicro.com> > <http://sips01.smithmicro.com>@xmpp-sip.smithmicro.com > <http://xmpp-sip.smithmicro.com> > <http://xmpp-sip.smithmicro.com>" type="unav > ailable"/> > > > > _______________________________________________ Users mailing list Users@lists.opensips.org http://lists.opensips.org/cgi-bin/mailman/listinfo/users