Hi Saeed, I suspect you have an error in your script - after drouting, it seams your script is also doing a lookup(location)....I mean you apply a logic to send the call to GW (drouting) and then you also do the registration-based lookup for users (location).
What you need to do is, after do_routing(), to send the call out by doing t_relay() and exit after it. Regards, Bogdan Saeed Akhtar wrote: > Hi all, > > I'm want to route my call to another sip server if certain criteria > match so I looked for it and found dynamic routing (drouting) and > Least Cost Routes - LCR module to do so. I read about dynamic routing > and as it was serving my purpose so I thought I should go for it. > Now in drouting, I gave address to another SIP server on local > network. When I tested it, it was a failure. I go through console > output. I found out it successfully modified ruri and following > message showed. > > DBG:drouting:do_routing: setting gw [0] as ruri "sip:<new > number>@<ip address>" > > > Then next it gave me following message: > > DBG:registrat:lookup: '<new number>' Not found in usrloc > > > And hence request was not forwarded to other sip server. I also > rechecked it through wireshark but no packet was forwarded to other > sip server ip address. > > What I believe is that OpenSIPS is checking its own registrar no > metter even if ip address of other server is already given. Can > someone please tell me how to bypass this registrar check and just > forward the request to other server simply. > > Regards, > > Saeed Akhtar > > ------------------------------------------------------------------------ > > _______________________________________________ > Users mailing list > Users@lists.opensips.org > http://lists.opensips.org/cgi-bin/mailman/listinfo/users > -- Bogdan-Andrei Iancu www.voice-system.ro _______________________________________________ Users mailing list Users@lists.opensips.org http://lists.opensips.org/cgi-bin/mailman/listinfo/users